Danfoss CF-RP Public (Tamperproof) Room Thermostat Installation guide

Type
Installation guide

Danfoss CF-RP Public (Tamperproof) Room Thermostat is designed to provide precise temperature control in public spaces while preventing unauthorized tampering. Here are some of its key features that will help you maintain a comfortable and energy-efficient environment:

Easy Installation: Installing the thermostat is quick and simple, with options for screw mounting. The included batteries power the device for up to 4 years, eliminating the need for wiring.

Reliable Wireless Connection: The thermostat communicates wirelessly with the central heating system, ensuring stable and interference-free operation. A transmission range of up to 30 meters (100 feet) allows for flexible placement in the room.

Danfoss CF-RP Public (Tamperproof) Room Thermostat is designed to provide precise temperature control in public spaces while preventing unauthorized tampering. Here are some of its key features that will help you maintain a comfortable and energy-efficient environment:

Easy Installation: Installing the thermostat is quick and simple, with options for screw mounting. The included batteries power the device for up to 4 years, eliminating the need for wiring.

Reliable Wireless Connection: The thermostat communicates wirelessly with the central heating system, ensuring stable and interference-free operation. A transmission range of up to 30 meters (100 feet) allows for flexible placement in the room.

088U0211
Instruction CF-RP Public (Tamperproof) Room Thermostat
Instruktion CF-RP Ö entlicher Raumthermostat (gegen Eingri e gesichert)
Vejledning CF-RP Rumthermostat - Institutionsmodel
Instruction CF-RP Thermostat collectivité (réglage masqué)
Bruksanvisning till CF-RP rumstermostat - institutionsmodell
SE
1VI.UH.P3.80
Produced by Danfoss Floor Heating Hydronics 01.2006
Instruction CF-RP Public (Tamperproof) Room Thermostat
Instruction . . . . . . . . . . . . . . . . . . . . . . . 3
Instruktion . . . . . . . . . . . . . . . . . . . . . . 10
Vejledning . . . . . . . . . . . . . . . . . . . . . . . 18
Instruction . . . . . . . . . . . . . . . . . . . . . . 25
SE
Bruksanvisning . . . . . . . . . . . . . . . . . . 33
2
VI.UH.P3.80
Produced by Danfoss Floor Heating Hydronics 01.2006
Instruction CF-RP Public (Tamperproof) Room Thermostat
3VI.UH.P3.80
Produced by Danfoss Floor Heating Hydronics 01.2006
Instruction CF-RP Public (Tamperproof) Room Thermostat
1. Functional Overview . . . . . . . . . . . . . . . . . . . 4
2. Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
3. Transmission Test . . . . . . . . . . . . . . . . . . . . . . 7
4. Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
5. Uninstallation . . . . . . . . . . . . . . . . . . . . . . . . . 9
6. Speci cations . . . . . . . . . . . . . . . . . . . . . . . . . 10
7. Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . 11
8. Figures and illustrations . . . . . . . . . . . A1-A2-A3
Index
4
VI.UH.P3.80
Produced by Danfoss Floor Heating Hydronics 01.2006
Instruction CF-RP Public (Tamperproof) Room Thermostat
Front -  g. 1
Front cover
Red LED (behind the cover)
Turning knob & push button (room tempera-
ture setting & installation/transmission test)
LED modes
• Permanent light ON
• No light OFF
• Slow  ashing Flashes
• Fast  ashing Flickers
Back -  g. 2
Back plate
Front cover release
Back plate lock/unlock (turn 90°)
Screw hole for wall mounting
Battery placement
Screw and wall plug
Note: To activate batteries please remove enclosed
strips from batteries
1. Functional Overview
5VI.UH.P3.80
Produced by Danfoss Floor Heating Hydronics 01.2006
Instruction CF-RP Public (Tamperproof) Room Thermostat
Front Cover -  g. 3
Front Cover release
2. Installation
Note:
To activate batteries in the Room Thermostat
please remove enclosed strips from the batteries
The assignment of the Room Thermostats to the
Master Controller should be within 1½m distance
Activate Install mode on
Master Controller -  g. 1
Use the menu selection button to select the
Install mode. Install LED ashes
Activate Install mode by pressing OK . Install
LED goes ON
Activate Install mode on
Room Thermostat
Press the push button . LED and icker
during communication
6
VI.UH.P3.80
Produced by Danfoss Floor Heating Hydronics 01.2006
Instruction CF-RP Public (Tamperproof) Room Thermostat
Select output on Master Controller
All available output LEDs on Master Controller
light up, and the  rst of them  ashes
Press output selection button , select desired
output ( ashes) and accept with OK
All output LEDs go OFF. Selected output
stays ON shortly
Room Thermostat installation status
Satisfactory - LED goes OFF
Not satisfactory - LED ashes 5 times
Note: A Room Thermostat can be assigned to sev-
eral outputs if needed
7VI.UH.P3.80
Produced by Danfoss Floor Heating Hydronics 01.2006
Instruction CF-RP Public (Tamperproof) Room Thermostat
3. Transmission Test
Initiate transmission test on Room
Thermostat -  g. 1
• Press the push button
• LED goes ON
Link test is satisfactory
• LED goes OFF
Link test is unsatisfactory
• LED ashes 5 times
No Link connection to Room
Thermostat
Try to relocate Room Thermostat in the room
Or install Repeater Unit (CF-RU) and locate be-
tween Master Controller and Room Thermostat
Note: Master Controller output LED(s) connected
to the room thermostat,  ash(es) during Link test
8
VI.UH.P3.80
Produced by Danfoss Floor Heating Hydronics 01.2006
Instruction CF-RP Public (Tamperproof) Room Thermostat
4. Mounting
Placing the Room Thermostat -  g. 4
! Wherever possible, the room thermostat should be
installed at a place where the e ect of sunlight,
draught, other heaters (eg. TVs), etc. is avoided.
Mounting with screws -  g. 2
5. Uninstallation
Activate Uninstall mode on Master
Controller -  g. 1
Use the Menu selection button to choose the
Uninstall menu. Uninstall LED ashes
Activate Uninstall mode by pressing OK .
Uninstall LED goes ON
Deselect output on Master Controller
Select output to be removed by output selec-
tion button
Remove  ashing output with OK
9VI.UH.P3.80
Produced by Danfoss Floor Heating Hydronics 01.2006
Instruction CF-RP Public (Tamperproof) Room Thermostat
6. Speci cations
7. Troubleshooting
Temperature setting range 5-35°C
Transmission frequency 868.42MHz
Transmission range in
normal buildings (up to)
30m
Transmission power < 1mW
Battery Alkaline 2xAA, 1.5V
Battery lifetime (up to) 3-4 years
Ambient temperature 0-50°C
IP class 21
Error Indication Possible Cause
The LED  ashes every 5th
minute
Low battery
The LED  ashes Critical low battery
The LED  ashes 5 times Installation/Link Test is
unsatisfactory
Instruktion CF-RP Rumthermostat - Institutionsmodel
18
VI.UH.P3.80
Fremstillet af Danfoss Floor Heating Hydronics 01.2006
1. Funktionsoversigt. . . . . . . . . . . . . . . . . . . . . . 19
2. Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
3. Transmissionstest . . . . . . . . . . . . . . . . . . . . . 21
4. Montering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
5. A nstallation . . . . . . . . . . . . . . . . . . . . . . . . . . 23
6. Speci kationer . . . . . . . . . . . . . . . . . . . . . . . . 24
7. Fejl nding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
8. Figurer og illustrationer . . . . . . . . . . A1-A2-A3
Indhold
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45

Danfoss CF-RP Public (Tamperproof) Room Thermostat Installation guide

Type
Installation guide

Danfoss CF-RP Public (Tamperproof) Room Thermostat is designed to provide precise temperature control in public spaces while preventing unauthorized tampering. Here are some of its key features that will help you maintain a comfortable and energy-efficient environment:

Easy Installation: Installing the thermostat is quick and simple, with options for screw mounting. The included batteries power the device for up to 4 years, eliminating the need for wiring.

Reliable Wireless Connection: The thermostat communicates wirelessly with the central heating system, ensuring stable and interference-free operation. A transmission range of up to 30 meters (100 feet) allows for flexible placement in the room.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI