Dell OptiPlex FX160 User guide

Hello! I am an AI chatbot trained to assist you with the Dell OptiPlex FX160 User guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Can I use non-supplied screws with the Wall/Under-Desk Mount?

What are the thermal restrictions for proper ventilation and cooling?

Should I place the chassis front face upwards or downwards?

Can I mount the chassis to a wall or desk that cannot support 20 lbs (9.1 kg)?

What type of screwdriver is recommended for installation?

About Warning

WARNING: A WARNING indicates a potential for property damage, personal injury, or death.

Dell™ Wall/Under-Desk Mount

WARNING: Before beginning, turn off the computer, disconnect the AC adapter from the

electrical outlet and the computer, and remove any other external cables from the computer.

WARNING: Before installing your computer in an enclosure, read the safety instructions that

shipped with your computer.

WARNING: Use of screws other than the supplied M4 screws can damage the system.

NOTE: Use a wall or the desk that supports at least 20 lbs (9.1kg) of weight. Use appropriate

mounting hardware depending on wall or desk material (hardware not included in kit).

Mounting the Bracket to a Wall or

Under a Desk

Mounting the Chassis to the Plate

1 wall 2 screws (4) not

included in kit

1 M4 screws (4) 2 chassis

3 wall mounting bracket 3 chassis mounting plate

Mounting the Chassis to the Wall Bracket

WARNING: Before mounting the chassis to the wall bracket

ensure that none of the vents (Dell™ OptiPlex™ FX160/160

has ventilation on four of the 6 primary surfaces) are blocked

on the system.

Thermal Restrictions

The following gaps must be maintained for proper ventilation and cooling:

Top — 2 inches (50.8mm)

Bottom and Right Side — 1 inch (25.4mm)

February 2009

Removing the Chassis From the Wall Bracket

____________________

Information in this document is subject to change without notice.

Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc.

is strictly forbidden.

Trademarks used in this text: Dell, the DELL logo, and OptiPlex are trademarks of Dell Inc.

Other trademarks and trade names may be used in this document to refer to either the entities claiming the

marks and names or their products. Dell Inc. disclaims any proprietary interest in trademarks and trade

names other than its own.

Mount the chassis onto the wall bracket till it

clicks into place.

WARNING: Chassis front face should

not be placed in the up or down position.

1 wall bracket

mounted to

the wall

2 chassis mouting

plate pre-attached

to the chassis

1 tab 2 chassis

Page is loading ...

Dell OptiPlex FX160 User guide

Other documents