Aktakom APS-3103 User manual

Aktakom
Brand
Aktakom
Model
APS-3103
Category
Power extensions
Type
User manual

This manual is also suitable for

POWER SUPPLY
APS-3103 / APS-3320 /
APS-3606
User’s Manual
www.tmatlantic.com
SINGLE OUTPUT DC BENDH REGULATED POWER SUPPLY APS-3103 / APS-3320 / APS-3606
Your new DC Regulated Power Supply provides accurate stable DC power. It is ideal for test benches,
laboratories, schools and repair facilities. The multi-turn volt- age control knob helps the user accurately
dial in precise voltage. It is easy to read digital outputs (voltage & current) through a large display
accurately. This product is expertly manufactured by AKTAKOM. It incorporates SMT PC boards and a
cooling fan for reliable performance.
Features
x SMD technology
x Attractive digital display shows voltage and current
x Cooling fan
x High precision voltage regulation
x Progressive current regulation
x Dual terminal system: Safety test style or expandable screw terminals
x Overload protection circuit
x Output polarity: positive or negative
x Rugged reinforced metal frame construction
x Dimensions (WxHxD): 10.4"x5.5"x14.2" (262x140x360 mm)
x Weight: Between 23 to 26 Lb (10 to 12 Kg)
Voltage
Current
Display
Ripple & Noise
APS-3103
120 V
3 A
100 mV
1 mA
5 mV rms
APS-3320
30 V
20 A
10 mV
10 mA
1 mV rms
APS-3606
60 V
5 A
10 mV
10 mA
3 mV rms
Specifications:
x Input: 110 VAC 60Hz
x Rated Output Power: 360 to 600 W
x Regulated Single Channel with Current Limit
x SMD technology
x Digital display shows voltage and current with LEDs
x Cooling fan
x High precision voltage regulation
x Applicable for School, Production Line, Laboratory and Maintenance
SINGLE OUTPUT DC BENDH REGULATED POWER SUPPLY APS-3103 / APS-3320 / APS-3606
1. Voltage indication
8. +Output terminal
2. Current indication
9. Power switch
3. +S output port
10. Output light
4. -S output port
11. Output switch
5. -Output port
12. Voltage adjustment Knob
6. +Output port
13. Current adjustment pot
7. -Output terminal
14. Chassis ground
Operating Instructions:
1. Press the power on/off button to turn power on.
2. Adjust the voltage knob to set the desired voltage. (Voltage level is shown on the digital display)
3. Adjust the current level pot with a small regular screwdriver to set the (maxi-mum) desired
current level. (The current of the power supply is set to be the maximum at the factory)
4. Connecting a load to the output terminals and pressing the output switch will illuminate the
output indicator light and the current output can be read on the digital display.
5. The sampling terminals are not often used. Use them under the following conditions: If the load
has a distance from the power supply, the sampling terminals may be used to compensate for
the inherent when using voltage drop a longer power line.
SINGLE OUTPUT DC BENDH REGULATED POWER SUPPLY APS-3103 / APS-3320 / APS-3606
Sampling connection diagram:
Attention: Disconnect the installed S- and S+ shorting wires when using the sampling connections.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Aktakom APS-3103 User manual

Aktakom
Brand
Aktakom
Model
APS-3103
Category
Power extensions
Type
User manual
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents