Winnebago View Profile Basic Operation Manual

Brand
Winnebago
Model
View Profile
Category
DVD players
Type
Basic Operation Manual

This manual is also suitable for

DVD PLAYER WITH
DELUXE SOUND
The DVD player is a selectable function
of the multi-featured audio system. The
player unit contains DVD/CD/MP3/AM-
FM stereo radio. It also accepts portable
audio player inputs and functions as an
alarm clock.
The player is connected directly to the
TV and can output sound to either the stereo
speakers in the TV or to the Deluxe Sound
speakers in the lounge area of the coach.
Refer to the manufacturer’s user guide
provided in your InfoCase for complete
feature descriptions and operating
instructions.
Connect Deluxe Sound Speakers
• Press the TV/Radio
Speaker Selector
switch (located near
the DVD player) to
the TV position to
connect speakers to
TV and DVD
player.
Set TV Video Input
• Turn TV and DVD player ON.
• Press the MODE button on the TV or the
SOURCE button on the DVD player
remote and select “INPUT 1”.
• The TV screen
will display the
DVD player
logo when the
correct input is
selected.
Play DVD
• Insert DVD face up into slot on lower
face of the player.
• The DVD will begin to load
automatically. The TV screen will
typically display READING or
LOADING.
• The DVD may load directly to
the main title/menu screen or it
may begin to play previews.
You may be able to skip previews if
desired by pressing the NEXT button on
the DVD player remote until you see the
main menu screen.
•When the main
menu screen
appears, press
the ENTER
button on the
DVD player
remote or
PLAY/PAUSE
button on DVD player to begin playing
the main feature. Use the arrow buttons
on the DVD remote to select another
feature to play.
• Volume is adjusted with the DVD
remote.
TV Sound through Deluxe Sound
Speakers
-If Equipped
When watching TV programs alone, the
TV normally plays sound through its own
built-in stereo speakers. If you wish to
connect TV stereo sound output to the
Deluxe Sound speakers for a richer sound
quality, follow these steps:
1. Press the TV/Radio Speaker Selector
switch (located near the DVD player) to
the TV position to connect speakers to
the DVD player.
2. Turn the TV ON.
3. Press the AUX button (located just
below the display on the face of the
DVD player.) This will route the TV
stereo sound output through the DVD
player and out to the Deluxe Sound
speakers.
TV/Radio Speaker
Selector Switch
(Located near
DVD player)
Continued—
Audio-Video System
Basic Operation
Guide
Part No. 161501-14-001
Rev. 1401130401
Copyright 2013 Winnebago Industries, Inc.
All rights reserved.
NOTE: See your InfoCase for specific
operating guides for audio and
video components.
4. Select TV channels and adjust volume
using the TV remote.
Further Information
See the manufacturer’s quick reference
guide provided in your InfoCase for
complete feature descriptions and
operating instructions.
  • Page 1 1
  • Page 2 2

Winnebago View Profile Basic Operation Manual

Brand
Winnebago
Model
View Profile
Category
DVD players
Type
Basic Operation Manual
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents