2. Computers & electronics
  3. TVs & monitors
  4. LCD TVs
  5. LG
  6. 72LZ9700
72LZ9700

LG 72LZ9700 Owner's manual

  • Hello! I am an AI chatbot trained to assist you with the LG 72LZ9700 Owner's manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
www.lg.com
OWNER’S MANUAL
LED LCD TV / LCD TV /
PLASMA TV
Please read this manual carefully before operating the
set and retain it for future reference.
2
ENG
ENGLISH
LICENSES
ENG
ENGLISH
LICENSES
Supported licenses may differ by model. For more information about licenses, visit www.lg.com.
Manufactured under license from Dolby Laboratories. “Dolby” and the double-D
symbol are trademarks of Dolby Laboratories.
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or
registered trademarks of HDMI Licensing LLC.
ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, Inc. This
is an official DivX Certified® device that plays DivX video. Visit www.divx.com for
more information and software tools to convert your files into DivX video.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be regis-
tered in order to play purchased DivX Video-on-Demand (VOD) movies. To obtain
your registration code, locate the DivX VOD section in your device setup menu. Go
to vod.divx.com for more information on how to complete your registration.
“DivX Certified® to play DivX® and DivX Plus ™ HD (H.264/MKV) video up to
1080p HD including premium content.”
“DivX®, DivX Certified® and associated logos are trademarks of DivX, Inc. and are
used under license.”
“Covered by one or more of the following U.S. patents :
7,295,673; 7,460,668; 7,515,710; 7,519,274”
NOTE
Image shown may differ from your TV.
Your TV’s OSD (On Screen Display) may differ slightly from that shown in this manual.
3
ENGENGLISH
LICENSES
4
ENG
ENGLISH
TABLEOFCONTENTS
TABLEOFCONTENTS
2 LICENSES
6 ASSEMBLINGANDPREPARING
6 Unpacking
9 Separate purchase
10 Parts and buttons
14 Lifting and moving the TV
14 Setting up the TV
14 - Attaching the stand
16 - Not using the Desk-Type Stand
16 - Mounting on a table
18 - Mounting on a wall
19 - Tidying cables
20 REMOTECONTROL
23 Magic Motion Remote Control Functions
24 - Registering Magic Motion Remote Control
24 - How to use Magic Motion Remote Control
24 - Precautions to Take when Using the
Magic Motion Remote Control
25 WATCHINGTV
25 Connecting to an antenna
25 - Connecting an antenna
25 - Connecting with a satellite dish
26 Turning the TV on for the first time
26 Watching TV
27 Accessing Home menu
28 Managing programmes
28 - Automatically setting up programme
31 - Cable DTV Setting
31 - Satellite DTV Setting
32 - Tivu Programme List Update
33 - Manually setting up programme (In
digital mode)
34 - Manually setting up programme (In
analogue mode)
36 - Editing your programme list
37 - Booster
37 - Using favourite programmes
37 - CI [Common interface] Information
38 Using additional options
38 - Adjusting aspect ratio
39 - Changing AV modes
40 - Using the input list
41 Using the quick menu
42 ENTERTAINMENT
42 Network Connection
42 - Connecting to a wired network
43 - Connecting to a wireless network
45 - When a security code is already set
48 - Network Status
49 Premium Account Function
49 - Notice
51 LG Apps Function
51 - Registration LG Apps
52 - Sign in with your LG Apps account
53 - Using LG Apps
54 - Using My Apps
55 Smart Share Function
55 - Connecting USB storage devices
56 - Connecting DLNA DMP (Digital Living
Network Alliance, Digital Media Player)
59 - Connecting DLNA DMR (Digital Living
Network Alliance, Digital Media Render)
60 - Browsing files
61 - Viewing Videos
64 - DivX registration code
65 - Viewing Photos
67 - Listening to music
69 DVR Function
69 - Precautions when using the USB Device
70 - Timeshift (PAUSE & REPLAY OF LIVE
TV)
73 - RECORDING
74 - SCHEDULE
77 - RECORDED TV
80 EPG (Electronic Programme Guide) Func-Func-
tion (In digital mode)
80 - Switch on/off EPG
80 - Select a programme
81 - NOW/NEXT Guide Mode
81 - 8 Day Guide Mode
81 - Date Change Mode
81 - Extended Description Box
82 3DIMAGING
82 3D Technology
83 When using 3D Glasses
83 3D Imaging Viewing Range
83 Viewing 3D Imaging
84 - Setting 3D Imaging
5
ENGENGLISH
TABLEOFCONTENTS
85 CUSTOMIZINGTVSETTINGS
85 The SETUP Menu
86 Customizing Settings
86 - SETUP Settings
87 - PICTURE Settings
92 - AUDIO Settings
95 - TIME Settings
97 - LOCK Settings
98 - OPTION Settings
101 - NETWORK Settings
102 - SUPPORT Settings
103MAKINGCONNECTIONS
104 Connection Overview
105 Connecting to a HD receiver, DVD, or
VCR player
105 - HDMI Connection
105 - DVI to HDMI Connection
106 - Component Connection
106 - Euro Scart Connection
107 - Composite Connection
107 Connecting to a PC
108 - HDMI Connection
108 - DVI to HDMI Connection
109 - RGB Connection
110 Connecting to an Audio System
110 - Digital Optical Audio Connection
110 Connecting to Headphone Connection
111 Connecting to a USB
111 Connecting to a CI Module
112 Connecting the Wireless Media Box
112 SIMPLINK Connection
113 - Activating and Using the SIMPLINK
menus
114 TELETEXT
114 Switch On/Off
114 Simple Text
114 - Page selection
114 Top Text
114 - Block / Group / Page Selection
114 - Direct Page Selection
115 Fastext
115 - Page selection
115 Special Teletext Function
116 DIGITALTELETEXT
116 Teletext within digital service
116 Teletext in digital service
117 MAINTENANCE
117 Updating the TV Firmware
118 Cleaning Your TV
118 - Screen and frame
118 - Cabinet and stand
118 - Power cord
119 Preventing “Image burn” or “Burn-in” on
your TV screen
120 TROUBLESHOOTING
122 SPECIFICATIONS
130 IRCODES
131 EXTERNALCONTROLDEVICE
SETUP
131 RS-232C Setup
131 Type of connector;
D-Sub 9-Pin Male
132 RS-232C Configurations
133 Communication Parameters
133 Command reference list
134 Transmission / Receiving Protocol
140 OPENSOURCELICENSE
6
ENG
ENGLISH
ASSEMBLINGANDPREPARING
Remote control and batteries
(AAA)
Nero MediaHome 4 Essentials CD
Owner’s manual
Polishing cloth
1
(Depending on model)
Cleansing Cloths (Mitt)
2
(Depending on model)
Ferrite core
(Depending on model)
ASSEMBLINGANDPREPARING
Unpacking
Check your product box for the following items. If there are any missing accessories, contact the local
dealer where you purchased your product. The illustrations in this manual may differ from the actual product
and item.
1 Gently wipe the spots on the cabinet with the polishing cloth.
2 Wipe spots on the exterior only with the cleasing cloths.
Do not wipe roughly when removing stains. Excessive pressure
may cause scratches or discolouration.
For cleaning front frame, please slowly wipe in one direction
after spraying water 1-2 times on cleansing cloths. Please
remove excessive moisture after cleaning. Excessive moisture
may cause water stains on the frame.
Water
7
ENGENGLISH
ASSEMBLINGANDPREPARING
Only 32/37/42/47LV37
**
x 8
M4 x 12
Screw for assembly Cable holder Screw for fixing
(Only 32/37LV37
**
)
Only 50/60PZ57
**
, 50/60PZ75
**
,
50/60PZ95
**
x 4
x 3
M4 x 26 M5x14.5
x 4
x 3
M4 x 28
M5 x 24
x 4
x 4
M4 x 28
M5x14.5
Only 50PZ57
**
, 50PZ75
**
, 50PZ95
**
Only 60PZ57
**
Only 60PZ75
**
, 60PZ95
**
Screw for assembly
Protection cover Protection cover
tape
Cable holder Power Cord holder
Power Cord
3D Glasses
(AG-S250)
Magic Motion Remote
Control, Strap,
Batteries (AA)
(Only 50/60PZ95
**
)
Wireless LAN for Broad-
band/DLNA Adaptor
(AN-WF100)
(Only 50/60PZ95
**
)
8
ENG
ENGLISH
ASSEMBLINGANDPREPARING
CAUTION
Do not use any unapproved items to ensure the safety and product life span.
Any damages or injuries by using unapproved items are not covered by the warranty.
The items supplied with your product may vary depending on the model.
Product specifications or contents of this manual may be changed without prior notice due to
upgrade of product functions.
How to use the ferrite core (Only Plasma TV)
- Use the ferrite core to reduce the electromagnetic interference in the LAN cable. Wind the LAN
cable once on the small ferrite core and thrice on the big ferrite core. Place the ferrite core close
to the TV.
[to the TV] [to an External device]
NOTE
For an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm
thick and 18 mm width. (Only 32/37/42/47LV37
**
)
*A 10 mm
*B 18 mm
9
ENGENGLISH
ASSEMBLINGANDPREPARING
Separatepurchase
Separate purchase items can be changed or modified for quality improvement without any notification.
Contact your dealer for buying these items.
These devices only work with compatible LG LED LCD TV, LCD TV or Plasma TV.
Wireless Media Box
(AN-WL100E, AN-WL100ET)
(Only 50/60PZ75
**
, 50/60PZ95
**
)
3D Glasses
(AG-S230, AG-S250, AG-S270)
(Only 50/60PZ57
**
, 50/60PZ75
**
,
50/60PZ95
**
)
Magic Motion Remote Control
(AN-MR200)
Wireless LAN for Broadband/
DLNA Adaptor
(AN-WF100)
(Only 32/37/42/47LV37
**
,
50/60PZ75
**
)
LG USB for VOD
(AN-UM200)
(Only France)
10
ENG
ENGLISH
ASSEMBLINGANDPREPARING
Partsandbuttons
Image shown may differ from your TV.
TV can be placed in standby mode in order to reduce the power consumption. And TV should be
turned off if it will not be watched for some time, as this will reduce energy consumption.
The energy consumed during use can be significantly reduced if the level of brightness of the
picture is reduced, and this will reduce the overall running cost.
NOTE
CAUTION
Do not step on the glass stand or subject it to any impact. It may break, causing possible injury from
fragments of glass, or the TV may fall.
Do not drag the TV. The floor or the product may be damaged.
11
ENGENGLISH
ASSEMBLINGANDPREPARING
Only 32/37/42/47LV37
**
NOTE
You can set the power indicator light to on or off by selecting OPTION in the Home menu - SETUP.
Touchbutton
2
Description
Turns the power on or off.
Changes the input source.
Accesses the Home menu, or saves your input and exits the menus.
Selects the highlighted menu option or confirms an input.
Adjusts the volume level.
Scrolls through the saved programmes.
1 Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment.
2 All of the buttons are touch sensitive and can be operated through simple touch with your finger.
Remotecontroland
intelligent
1
sensors
PowerIndicator
Screen
Touchbuttons
2
RearConnectionpanel
(Seep.103)
SideConnectionPanel
Speakers
Only 32/37/42/47LV375G,
32/37/42/47LV375S,
32/37/42/47LV370S
12
ENG
ENGLISH
ASSEMBLINGANDPREPARING
SideConnection
Panel
Only 50/60PZ57
**
1 Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment.
2 All of the buttons are touch sensitive and can be operated through simple touch with your finger.
Touchbutton
2
Description
Turns the power on or off.
Changes the input source.
Accesses the Home menu, or saves your input and exits the menus.
Selects the highlighted menu option or confirms an input.
Adjusts the volume level.
Scrolls through the saved programmes.
Screen
Touchbuttons
2
Only 50/60PZ570G, 50/60PZ570S
RearConnectionpanel
(Seep.103)
Speakers
PowerIndicator
Remotecontroland
intelligent
1
sensors
13
ENGENGLISH
ASSEMBLINGANDPREPARING
SideConnection
Panel
Only 50/60PZ75
**
, 50/60PZ95
**
1 Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment.
2 All of the buttons are touch sensitive and can be operated through simple touch with your finger.
Touchbutton
2
Description
Turns the power on or off.
Changes the input source.
Accesses the Home menu, or saves your input and exits the menus.
Selects the highlighted menu option or confirms an input.
Adjusts the volume level.
Scrolls through the saved programmes.
Screen
Touchbuttons
2
Remotecontroland
intelligent
1
sensors
PowerIndicator
Only 50/60PZ750G, 50/60PZ750S,
50/60PZ950G, 50/60PZ950S
RearConnectionpanel
(Seep.103)
Speakers
14
ENG
ENGLISH
ASSEMBLINGANDPREPARING
LiftingandmovingtheTV
When moving or lifting the TV, read the following to
prevent the TV from being scratched or damaged
and for safe transportation regardless of its type
and size.
SettinguptheTV
Put your TV on a pedestal stand and mount the TV
on a table or wall.
If you are not mounting the TV to a wall, use the
following instructions to attach the stand.
Attachingthestand
It is recommended to move the TV in the box
or packing material that the TV originally came
in.
Before moving or lifting the TV, disconnect the
power cord and all cables.
When holding the TV, the screen should face
away from you to avoid damage.
Hold the top and bottom of the TV frame firmly.
Make sure not to hold the transparent part,
speaker, or speaker grill area.
When transporting a large TV, there should be
at least 2 people.
When transporting the TV by hand, hold the
TV as shown in the following illustration.
When transporting the TV, do not expose the
TV to jolts or excessive vibration.
When transporting the TV, keep the TV
upright, never turn the TV on its side or tilt
towards the left or right.
Avoid touching the screen at all times, as
this may result in damage to the screen.
CAUTION
Only 32/37/42/47LV37
**
1
Lay the TV with the screen side down on a flat
surface.
Lay a foam mat or soft protective cloth
on the surface to protect the screen from
damage. Make sure no objects press
against the screen.
CAUTION
3 Secure the TV and the stand with the 4 screws.
Model Screwfor
assembly
Numberof
screws
32/37/42/47LV37
**
M4 x 12
4
2
Assemble the parts of the StandBody with the
StandBase of the TV.
Model Screwfor
assembly
Numberof
screws
32/37/42/47LV37
**
M4 x 12
4
StandBody
StandBase
Tighten the screws firmly to prevent
the TV from tilting forward. Do not over
tighten.
CAUTION
15
ENGENGLISH
ASSEMBLINGANDPREPARING
2
Assemble the parts of the StandBody with the
StandBase of the TV.
Model Screwfor
assembly
Numberof
screws
50PZ75
**
50PZ95
**
M5x14.5 3
60PZ75
**
60PZ95
**
M5x14.5 4
StandBase
StandBase
StandBody
StandBody
Only 50/60PZ57
**
1
Lay the TV with the screen side down on a flat
surface.
2
Assemble the parts of the StandBody with the
StandBase of the TV.
Model Screwfor
assembly
Numberof
screws
50PZ57
**
M5 x 14.5 3
60PZ57
**
M5 x 24 3
3 Secure the TV and the stand with the 4 screws.
Model Screwfor
assembly
Numberof
screws
50PZ57
**
M4 x 26 4
60PZ57
**
M4 x 28 4
Lay a foam mat or soft protective cloth
on the surface to protect the screen from
damage. Make sure no objects press
against the screen.
CAUTION
Tighten the screws firmly to prevent
the TV from tilting forward. Do not over
tighten.
CAUTION
StandBase
StandBody
Only 50/60PZ75
**
, 50/60PZ95
**
1
Lay the TV with the screen side down on a flat
surface.
Lay a foam mat or soft protective cloth
on the surface to protect the screen from
damage. Make sure no objects press
against the screen.
CAUTION
16
ENG
ENGLISH
ASSEMBLINGANDPREPARING
Swivel 20 degrees to the left or right and
adjust the angle of the TV to suit your
view.
NOTE
Do not place the TV near or on sources
of heat, as this may result in fire or other
damage.
CAUTION
2
Connect the power cord to a wall outlet.
Mountingonatable
1
Lift and tilt the TV into its upright position on a
table.
- Leave a 10 cm (minimum) space from the
wall for proper ventilation.
10 cm
10 cm
10 cm
10 cm
Only 50/60PZ57
**
, 50/60PZ75
**
, 50/60PZ95
**
NotusingtheDesk-TypeStand
When installing the wall mounting bracket, use the
Protection cover. This will protect the opening from
accumulating dust and dirt.
Push the supplied protection cover into the
opening at the bottom of the TV until it locks in
place.
Attach the protection cover tape.
Protection
covertape
Protectioncover
Tighten the screws firmly to prevent
the TV from tilting forward. Do not over
tighten.
CAUTION
3 Secure the TV and the stand with the 4 screws.
Model Screwfor
assembly
Numberof
screws
50PZ75
**
50PZ95
**
M4 x 26 4
60PZ75
**
60PZ95
**
M4 x 28 4
17
ENGENGLISH
ASSEMBLINGANDPREPARING
SecuringtheTVtoawall
(This feature is not available for all models.)
1 Insert and tighten the eye-bolts, or TV brackets
and bolts on the back of the TV.
- If there are bolts inserted at the eye-bolts
position, remove the bolts first.
2 Mount the wall brackets with the bolts to the
wall.
Match the location of the wall bracket and the
eye-bolts on the rear of the TV.
3 Connect the eye-bolts and wall brackets tightly
with a sturdy rope.
Make sure to keep the rope horizontal with the
flat surface.
Use a platform or cabinet that is strong
and large enough to support the TV
securely.
NOTE
Make sure that children do not climb on
or hang on the TV.
CAUTION
SecuringtheTVtoatable
Only 32/37LV37
**
Fix the TV to a table to prevent from tilting forward,
damage, and potential injury.
Mount the TV on a table, and then insert and
tighten the supplied screw on the rear of the stand.
To prevent TV from falling over, the TV
should be securely attached to the floor/
wall per installation instructions. Tipping,
shaking, or rocking the TV may cause
injury.
WARNING
18
ENG
ENGLISH
ASSEMBLINGANDPREPARING
UsingtheKensingtonsecuritysystem
(This feature is not available for all models.)
The Kensington security system connector is
located at the rear of the TV. For more information
of installation and using, refer to the manual
provided with the Kensington security system or
visit http://www.kensington.com.
Connect the Kensington security system cable
between the TV and a table.
Mountingonawall
Attach a wall mount bracket at the rear of the TV
carefully and install the wall mount bracket on a
solid wall perpendicular to the floor. When you
attach the TV to other building materials, please
contact qualified personnel.
LG recommends that wall mounting be performed
by a qualified professional installer.
Make sure to use screws and wall mount bracket
that meet the VESA standard. Standard dimen-
sions for the wall mount kits are described in the
following table.
Separatepurchase(WallMountingBracket)
Model
32LV37
**
37LV37
**
VESA(AxB) 200 x 100 200 x 200
Standardscrew M4 M6
Numberofscrews 4 4
Wallmount
bracket
LSW100B,
LSW100BG
LSW200B,
LSW200BG
Model
42/47LV37
**
VESA(AxB) 400 x 400
Standardscrew M6
Numberofscrews 4
Wallmount
bracket
LSW400B, LSW400BG,
DSW400BG
10 cm
10 cm
10 cm
10 cm
19
ENGENGLISH
ASSEMBLINGANDPREPARING
Tidyingcables
Only 32/37/42/47LV37
**
1 Gather and bind the cables with the Cable
Holder.
Only
50/60PZ57
**
,
50/60PZ75
**
, 50/60PZ95
**
1 Install the PowerCordHolder and Power
Cord. It will help prevent the power cable from
being removed by accident.
2 Gather and bind the cables with the Cable
Holder. Install the LAN cable as shown to
reduce the electromagnetic wave.
Do not move the TV by holding the Cable
Holder & PowerCordHolder, as the
Cable holders may break, and injuries
and damage to the TV may occur.
CAUTION
CableHolder
Disconnect the power first, and then move or
install the TV. Otherwise electric shock may
occur.
If you install the TV on a ceiling or slanted
wall, it may fall and result in severe injury.
Use an authorized LG wall mount bracket
and contact the local dealer or qualified
personnel.
Do not over tighten the screws as this may
cause damage to the TV and void your war-
ranty.
Use the screws and wall mount bracket that
meet the VESA standard. Any damages or
injuries by misuse or using an improper ac-
cessory are not covered by the warranty.
CAUTION
Use the screws that are listed on the VESA
standard screw specifications.
The wall mount kit includes an installation
manual and necessary parts.
The length of screws may differ depending
on the wall mount. Make sure to use the
proper length.
For more information, refer to the manual
supplied with the wall mount bracket.
NOTE
Model 50PZ57
**
50PZ75
**
50PZ95
**
60PZ57
**
60PZ75
**
60PZ95
**
VESA(AxB) 400 x 400 600 x 400
Standardscrew M6 M8
Numberofscrews 4 4
Wallmount
bracket
PSW400B,
PSW400BG,
DSW400BG
PSW600B,
PSW600BG
PowerCordHolder
20
ENG
ENGLISH
REMOTECONTROL
REMOTECONTROL
The descriptions in this manual are based on the buttons on the remote control.
Please read this manual carefully and use the TV correctly.
To replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching
and ends to the label inside the compartment, and close the battery cover. Be sure to
point the remote control toward the remote control sensor on the TV.
To remove the batteries, perform the installation actions in reverse.
Do not mix old and new batteries, as this may damage the remote control.
CAUTION
Alphanumericbuttons
Enters letters and numbers.
LIST (See p.36)
Accesses the saved programme list.
]
(Space)
Opens an empty space on the screen keyboard.
Q.VIEW
Returns to the previously viewed programme.
(POWER)
Turns the TV on or off.
LIGHT
Illuminates the remote control buttons.
ENERGYSAVING (See p.87)
Adjusts the brightness of the screen to reduce energy consumption.
AVMODE (See p.39)
Selects an AV mode.
INPUT (See p.40)
Changes the input source; Turns the TV on.
TV/RAD
Selects Radio, TV and DTV programme.
/