Page is loading ...
On-Screen Display Guide
C346ZC252 1080p MPX
PTZ Camera
On-Screen Display
Guide
C346ZC252 1080p MPX
PTZ Camera
#LX400097; r.45718/45804; en-US
iii
Thank you for purchasing this product. FLIR Systems, Inc. is committed to providing our customers with a
high quality, reliable security solution.
This manual refers to the following models:
C346ZC252
For the latest online manual, downloads and product updates, and to learn about our complete line of
accessory products, please visit our website at:
www.flir.com/security/pro
WARNING
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE
COVER. NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral
triangle, is intended to alert the user to the presence of uninsulated
"dangerous voltage" within the product’s enclosure that may be of
sufficient magnitude to constitute a risk of electric shock.
The exclamation point within an equilateral triangle is intended to
alert the user to the presence of important operating and
maintenance (servicing) instructions in the literature accompanying
the appliance.
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT
TO RAIN OR MOISTURE.
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF THE PLUG
TO THE WIDE SLOT AND FULLY INSERT.
#LX400097; r.45718/45804; en-US
iv
Using the On-Screen Display
(OSD) Menu for C346ZC252
1
You can configure the camera’s advanced settings on a FLIR MPX DVR using the OSD
menu. Use the OSD menu to correct imperfections in the camera image as well as config-
ure automated PTZ functions like preset locations, patterns, and tours.
NOTE
If you have made changes in the OSD menu and you are not happy with the outcome, see 1.3.19 Camera
Factory Defaults, page 15 to reset all items in the Camera Setting menu to their default values. See 1.1.4
Restore Factory Defaults, page 3 to reset all other items in the OSD menu.
To access the OSD menu:
1. In Live View, click the channel that has the PTZ camera connected to open in full-
screen.
2. Right-click and click Pan/Tilt/Zoom. Enter the system user name and password if
prompted. The PTZ menu opens.
3. Click the arrow in the PTZ control window to show advanced controls.
4. Click
. The OSD menu appears over the camera image.
5. Use the on-screen controls to configure menu items:
• Up / down arrows: Select menu items.
• Left / right arrows: Change values for menu items.
• Cancel: Exit the OSD menu.
• Enter: Confirm selection.
1.1 System Settings
Use the system settings menu to configure basic system information.
#LX400097; r.45718/45804; en-US
1
Using the On-Screen Display (OSD) Menu for C346ZC252
1
System Settings — Menu Structure:
SYSTEM INFORMATION ADDR Displays the camera address.
BR Displays the camera baud rate.
PARITY Displays the communication
parity.
VERSION Displays the PTZ firmware
version.
CAM VER Displays the camera firmware
version.
ADDR INFORMATION ADDR TYPE
• HARD
• SOFT
ADDR-HARD 1
ADDR-SOFT
0–255
SAVE Save your settings.
SET NORTH Set the current viewing angle as the benchmark angle for the camera.
LANGUAGE Set the language for the OSD menu.
VIDEO OUTPUT
• CVI
• TVI
• AHD
• SD (CVBS)
FACTORY DEFAULT Restore the camera system settings to their original, out-of-the-box
state. Exposure, language, and video output settings are not affected
when you restore the camera system settings.
RESTART Reboot the PTZ camera. OSD settings are not affected when you re-
boot the camera.
1.1.1 System Information
NOTE
The information in this section is for service purposes only.
The system information menu displays the PTZ protocol information, including the camera
address, baud rate, parity, and firmware version numbers. The information in this section
is for reference and cannot be configured through the OSD menu.
#LX400097; r.45718/45804; en-US
2
Using the On-Screen Display (OSD) Menu for C346ZC252
1
1.1.2 Address (ADDR) Information
NOTE
The information in this section is for service purposes only.
The address information menu lets you choose how the camera address is determined.
The camera address is how standard definition DVRs identify PTZ cameras. Under ADDR
TYPE, select HARD to have the address determined by the DIP switches inside the cam-
era housing, or SOFT to select the address using the software (select the address value
under ADDR-SOFT).
1.1.3 Video Output
Change the camera’s video format to be compatible with your analog recorder.
To change the camera’s video format:
1. Use the on-screen arrow keys to navigate to SYSTEM SETTING and click Enter.
2. Under VIDEO OUTPUT, click the left / right arrow keys to select the video format of
your preference.
1.1.4 Restore Factory Defaults
Restore the camera module to its out-of-the-box state. This will reset all menu items ex-
cept those in the CAMERA SETTING menu back to their default values.
CAUTION
This step cannot be undone.
To restore camera factory defaults:
1. Use the on-screen arrow keys to navigate to SYSTEM SETTING and click Enter.
2. Select FACTORY DEFAULTand click Enter.
#LX400097; r.45718/45804; en-US
3
Using the On-Screen Display (OSD) Menu for C346ZC252
1
1.1.5 Camera System Restart
Restarts the camera system. The camera powers off and then resumes normal function.
NOTE
Restarting the camera system does not affect OSD menu settings.
To restart the camera module:
1. Use the on-screen arrow keys to navigate to SYSTEM SETTING and click Enter.
2. Select RESTARTand click Enter.
1.2 Display Settings
Use the display settings menu to choose what information appears over the camera image.
Display Settings — Menu Structure:
PRESET TITLE ON / OFF
AZIMUTH DISP ON / OFF
TIME DISP ON / OFF
POSITION ON / OFF
ZOOM DISP ON / OFF
INSIDE TEMP
• °C
• °F
• OFF
TITLE DISP ON / OFF
PATTERN DISP ON / OFF
RS485 DETECT ON / OFF
To configure the display settings:
1. Use the on-screen arrow keys to navigate to DISPLAY SETTING and click Enter.
2. Under PRESET TITLE, select ON to show the preset title on the video display, or se-
lect OFF to hide.
3. Under AZIMUTH DISP, select ON to show the camera’s coordinates on the video dis-
play, or select OFF to hide.
4. Under TIME DISP, select ON to show the camera’s time on the video display, or select
OFF to hide.
5. Under POSITION, select ON to show the angle between the camera’s current position
and the benchmark position on the video display (for details on setting benchmark po-
sition, see 1.1 System Settings, page 1), or select OFF to hide.
6. Under ZOOM DISP, select ON to display the camera’s current zoom amount, or select
OFF to hide.
7. Under INSIDE TEMP, select °F or °C to show the camera’s internal temperature on the
video display, or select OFF to hide.
8. Under TITLE DISP, select ON to show the camera title / name on the video display, or
select OFF to hide.
9. Under PATTERN DISP, select ON to display the currently enabled pattern, or select
OFF to hide.
10. Under RS485 DETECT, select ON to display the camera’s PTZ protocol information,
or select OFF to hide.
#LX400097; r.45718/45804; en-US
4
Using the On-Screen Display (OSD) Menu for C346ZC252
1
1.3 Camera Settings
Use the camera settings menu to adjust the camera image.
Camera Settings — Menu Structure:
WB SETTING WB MODE
• AUTO
• ATW
• INDOOR
• OUTDOOR
• NA LAMP
• NA LAMP AUTO
• MANUAL
• NATURAL
R GAIN
0–100
B GAIN
0–100
EXPOSURE
SETTING
AE MODE
• AUTO
• MANUAL
• IRIS PRIO
• SHUT PRIO
GAIN
SETTING
1–16
SHUTTER 1/4 – 1/30,000
IRIS
SETTING
1–18
EXPOSURE
COMP
1–15
BLC ON / OFF
NR
1–15, OFF
CAMERA 3D
NR
1–15, OFF
NEXT PAGE HIGH
LIGHT
REDUCE
1–4, OFF
AE RE-
COVERY
• 5M
• 15M
• 30M
• 1H
• 2H
• OFF
WDR
SETTING
WDR MODE 1–15, OFF
DAY/NIGHT
SETTING
DAY/NIGHT
• TIME
• NIGHT
• DAY
• AUTO
DAY TIME Enter the time of the day you want the camera to stay in color mode.
This option is available only when you select TIME in the DAY/NIGHT
setting.
NIGHT TIME Enter the time of the day you want the camera to stay in black and
white mode. This option is available only when you select TIME in the
DAY/NIGHT setting.
SAVE Save your settings
#LX400097; r.45718/45804; en-US
5
Using the On-Screen Display (OSD) Menu for C346ZC252
1
FOCUS
SETTING
FOCUS
MODE
• AUTO
• MANUAL
• SEMIAUTO
FOCUS
LIMIT
• 10CM
• 1M
• 2M
• 3M
• 5M
• AUTO
AF
SENSITIVITY
• LOW
• MID
• HIGH
IMAGE
ADJUST
HUE 1–100
BRIGHT-
NESS
1–100
SATURATION
1–100
CHROMA
SUPPRESS
1–4
GAMMA
1–16
CONTRAST
1–100
STYLE
• STANDARD
• VIVID
• SOFT
DEFOG
SETTING
DEFOG
MODE
• MANUAL
• AUTO
• OFF
INTENSITY
1–3
ZOOM
SPEED
1–8
SHARPNESS
1–16
NEXT PAGE SHARPNESS
RESTRAIN
1–16
DIGITAL
ZOOM
ON / OFF
PICTURE
FLIP
ON / OFF
LENS INIT Performs a lens initialization.
PICTURE
MODE
• 720P / 25 — PAL
• 720P / 30 — NTSC
• 720P / 50 — PAL
• 720P / 60 — NTSC
• 1080P / 25 — PAL
• 1080P / 30 — NTSC
CAMERA
MAINTAIN
ON / OFF
CAMERA
FACTORY
DEFAULT
Restores the camera to its original, out-of-the-box settings.
CAMERA
RESTART
Restarts the camera.
#LX400097; r.45718/45804; en-US
6
Using the On-Screen Display (OSD) Menu for C346ZC252
1
1.3.1 White Balance Settings
The white balance setting menu is used to correct color appearance in the camera image.
To configure white balance settings:
1. Use the on-screen arrow keys to navigate to CAMERA SETTING and click Enter.
2. Select WB SETTING and click Enter.
3. Under WB MODE, click the left / right arrow keys to select one of the following options
based on the camera’s environment:
• AUTO: The camera adjusts white balance automatically.
• ATW: The camera adjusts white balance automatically for various color
temperatures.
• INDOOR: Recommended for most indoor installations.
• OUTDOOR: Recommended for outdoor installations.
• NA LAMP: Recommended for environments with natural lighting.
• NA LAMP AUTO: Recommended for environments with natural lighting — white
balance is adjusted automatically for natural lighting conditions.
• NATURAL: Designed to reduce eye strain.
• MANUAL: This mode allows you to configure the R GAIN (red) and B GAIN (blue)
values to achieve proper white balance.
1.3.2 Exposure Mode
The exposure mode settings allow you to configure the concentration of light used to pro-
duce an image. You can configure a custom exposure or let the camera determine the ex-
posure automatically.
#LX400097; r.45718/45804; en-US
7
Using the On-Screen Display (OSD) Menu for C346ZC252
1
To configure the camera’s exposure mode:
1. Use the on-screen arrow keys to navigate to CAMERA SETTING and click Enter.
2. Select EXPOSURE SETTING and click Enter.
3. Under AE MODE, click the left / right arrow keys to select one of the following exposure
modes:
• AUTO: The settings for gain, iris, and shutter are determined automatically by the
software.
• IRIS PRIORITY: Configure iris settings only. Gain and shutter settings are deter-
mined automatically by the software.
• SHUTTER PRIORITY: Configure shutter settings only. Gain and iris settings are de-
termined automatically by the software.
• MANUAL: Advanced users only — this mode requires you to configure the settings
for gain, iris, and shutter to achieve proper exposure.
4. Under GAIN SETTING, click the left / right arrow keys to set the gain value (1–16). Set-
ting the gain manually allows you to artificially create a brighter (high gain) or darker
(low gain) image. The AE MODE must be set to MANUAL to configure the gain value.
5. Under SHUTTER, click the left / right arrow keys to set the shutter speed (1/4 – 1/
30,000). Setting the shutter speed manually determines how long the camera shutter
remains open when capturing an image. It is recommended to keep shutter speed set
to 1/60 to ensure smooth video. The AE MODE must be set to MANUAL or SHUTTER
PRIO to configure the shutter speed.
6. Under IRIS, click the left / right arrow keys to adjust the iris (1–18). Setting the iris man-
ually determines how much light comes through the lens. The AE MODE must be set
to MANUAL or IRIS PRIO to configure the iris setting.
1.3.3 Exposure Compensation
Use exposure compensation to fine-tune the camera’s exposure. You can use exposure
compensation with automatic exposure to brighten or darken an image to your preference.
To set exposure compensation:
1. Use the on-screen arrow keys to navigate to CAMERA SETTING and click Enter.
2. Select EXPOSURE SETTING and click Enter.
3. Under EXPOSURE COMP, click the left / right arrow keys to set the exposure compen-
sation value from 1 (darkest) to 15 (brightest).
NOTE
Exposure compensation does not affect the camera image if AE MODE is set to MANUAL.
#LX400097; r.45718/45804; en-US
8
Using the On-Screen Display (OSD) Menu for C346ZC252
1
1.3.4 Bright Light Compensation (BLC)
Turning on Bright Light Compensation (BLC) tones down highlighted areas of the image to
create clearer, more detailed renderings of darker objects in the foreground.
To enable BLC:
1. Use the on-screen arrow keys to navigate to CAMERA SETTING and click Enter.
2. Select EXPOSURE SETTING and click Enter.
3. Under BLC, click the left / right arrow keys to select ON.
1.3.5 2D & 3D Digital Noise Reduction
The camera features 2 types of noise reduction: 2D temporal noise reduction (NR in the
OSD menu) and 3D spatial noise reduction (CAMERA 3D NR). 2D noise reduction helps
to limit the appearance of noise (graininess in the camera image) around stationary ob-
jects. 3D noise reduction accomplishes the same process for moving objects as well, pro-
viding clearer images in low light conditions. Removing noise from the camera image
reduces your recording file size and makes videos clearer and more detailed.
To configure noise reduction:
1. Use the on-screen arrow keys to navigate to CAMERA SETTING and click Enter.
2. Select EXPOSURE SETTING and click Enter.
3. Under NR, click the left / right arrow keys to set the 2D noise reduction level (1–15). It
is recommended to keep the 2D noise reduction at the default level of 8 unless the
camera image is noisey in low-light conditions.
4. Under CAMERA 3D NR, click the left / right arrow keys to set the 3D noise reduction
level (1–15). It is recommended to keep the 3D noise reduction at the default level of 8
unless the camera image is noisey in low-light conditions.
#LX400097; r.45718/45804; en-US
9
Using the On-Screen Display (OSD) Menu for C346ZC252
1
1.3.6 High Light Reduction (HLR)
Turn High Light Reduction (HLR) on or off. Turning HLR on darkens extremely bright cam-
era images to ensure a clear camera image.
To enable HLR:
1. Use the on-screen arrow keys to navigate to CAMERA SETTING and click Enter.
2. Select EXPOSURE SETTING and click Enter.
3. Select NEXT PAGE and click Enter.
4. Under HIGH LIGHT REDUCE, click the left / right arrow keys to select a sensitivity lev-
el (1 (lowest) – 4 (highest) ), or OFF to turn off HLR.
1.3.7 Auto Exposure Recovery
Changing the camera’s iris setting through the DVR menu takes priority over the exposure
settings in the OSD menu. Turning on Auto Exposure Recovery (AER) will reset the cam-
era’s iris to the setting specified in the OSD menu after a period of time.
To enable AER:
1. Use the on-screen arrow keys to navigate to CAMERA SETTING and click Enter.
2. Select EXPOSURE SETTING and click Enter.
3. Select NEXT PAGE and click Enter. Repeat on the next page to reach the last page of
the EXPOSURE SETTING menu.
4. Under AE RECOVERY, click the left / right arrow keys to select a period of time after
which the camera’s exposure will reset. Choose a time between 5M and 2H, or select
OFF to turn off auto exposure recovery.
1.3.8 Wide Dynamic Range (WDR)
Turn Wide Dynamic Range (WDR) on or off. Turning WDR on fixes harsh contrast between
bright and dark sections of the camera image.
#LX400097; r.45718/45804; en-US
10
Using the On-Screen Display (OSD) Menu for C346ZC252
1
To enable digital WDR:
1. Use the on-screen arrow keys to navigate to CAMERA SETTING and click Enter.
2. Select EXPOSURE SETTING and click Enter.
3. Select NEXT PAGE and click Enter.
4. Select WDR SETTING and click Enter.
5. Under WDR MODE, click the left / right arrow keys to select ON.
1.3.9 Day / Night Setting
Choose how the camera switches over from day mode (color) to night mode (black &
white).
To configure day / night settings:
1. Use the on-screen arrow keys to navigate to CAMERA SETTING and click Enter.
2. Select DAY / NIGHT SETTING and click Enter.
3. Under DAY / NIGHT, click the left / right arrow keys to select one of the following
options:
• TIME The camera switches between day and night mode based on times set in the
DAY TIME and NIGHT TIME settings.
• NIGHT: The camera remains in black & white. This setting is not recommended un-
less the camera is in a constantly dark environment.
• DAY: The camera remains in full color. This setting is not recommended unless the
camera is in an area with constant lighting.
• AUTO: The camera switches between day and night mode automatically with
changing light conditions (recommended).
4. DAY TIME: If DAY/NIGHT is set to TIME, then the camera switches to day mode at the
specified time. The default is 07H 00M (24 hour format).
5. NIGHT TIME: If DAY/NIGHT is set to TIME, then the camera switches to night mode
at the specified time. The default is 19H 00M (24 hour format).
6. Click SAVE.
1.3.10 Focus Settings
Choose how the camera focuses on objects in the image.
#LX400097; r.45718/45804; en-US
11
Using the On-Screen Display (OSD) Menu for C346ZC252
1
To configure focus settings:
1. Use the on-screen arrow keys to navigate to CAMERA SETTING and click Enter.
2. Select FOCUS SETTING and click Enter.
3. Under FOCUS MODE, click the left / right arrow keys to select one of the following
options:
• AUTO: The camera automatically adjusts the focus after it performs a Pan-Tilt-Zoom
function (recommended).
• MANUAL: The camera must be manually put into focus using the DVR menu.
• SEMIAUTO: The camera automatically adjusts the focus after Zoom functions only.
4. Under FOCUS LIMIT, click the left / right arrow keys to set the focus limit. Set the focus
limit between 10CM and 5M to only perform auto-focus on objects further out than the
focus limit (for example, a focus limit of 1M means that the camera will focus on objects
further than a metre away), or select AUTO to auto-focus on all objects regardless of
their distance from the camera.
5. Under AF SENSITIVITY, click the left / right arrow keys to select LOW (least amount of
automatic focusing), MID, or HIGH (greatest amount of automatic focusing).
1.3.11 Image Adjust
Perform fine-tuning on the camera image. This menu item allows you to configure the hue,
brightness, saturation, chroma suppression, gamma level, contrast, and image style.
To adjust the camera image:
1. Use the on-screen arrow keys to navigate to CAMERA SETTING and click Enter.
2. Select IMAGE ADJUST and click Enter.
3. Under HUE, click the left / right arrow keys to select a hue value for the camera image
(1–100).
4. Under BRIGHTNESS, click the left / right arrow keys to select a brightness value for
the camera image (1–100).
#LX400097; r.45718/45804; en-US
12
Using the On-Screen Display (OSD) Menu for C346ZC252
1
5. Under SATURATION, click the left / right arrow keys to select a saturation value for the
camera image (1–100).
6. Under CHROMA SUPPRESS, click the left / right arrow keys to select a chroma sup-
pression value for the camera image (1–4).
7. Under GAMMA, click the left / right arrow keys to select a gamma value for the camera
image (1–16).
8. Under CONTRAST, click the left / right arrow keys to select a contrast value for the
camera image (1–100).
9. Under STYLE, click the left / right arrow keys to select one of the following options:
• STANDARD: Default image style.
• SOFT: Lowers image detail to create a softer image.
• VIVID: Sharp, saturated image with vivid colors.
1.3.12 Defog Setting
Set the defog settings for the camera. Enabling defog mode reduces the appearance of
fog, mist, or dust in the camera image.
To set the defog setting:
1. Use the on-screen arrow keys to navigate to CAMERA SETTING and click Enter.
2. Select DEFOG SETTING and click Enter.
3. Under DEFOG MODE, click the left / right arrow keys to select one of the following
options:
• MANUAL: Manually configure defog settings.
• AUTO: Reduce the appearance of fog automatically.
• OFF: Disable defog settings.
4. INTENSITY: If DEFOG MODE is set to MANUAL, set the level of fog compensation
from 1 (lowest) to 3 (highest).
1.3.13 Zoom Speed
Set the speed for the camera’s zoom function.
To set zoom speed:
1. Use the on-screen arrow keys to navigate to CAMERA SETTING and click Enter.
2. Under ZOOM SPEED, click the left / right arrow keys to select a zoom speed value
from 1 (slowest) to 8 (fastest).
1.3.14 Sharpness Settings
Set the sharpness and sharpness restrain values for the camera to configure the sharp-
ness of the camera image. The SHARPNESS menu item determines the sharpness of the
camera image, while SHARPNESS RESTRAIN is used to fine-tune the sharpness to elim-
inate noise in the image.
To configure image sharpness:
1. Use the on-screen arrow keys to navigate to CAMERA SETTING and click Enter.
2. Under SHARPNESS, click the left / right arrow keys to set an image sharpness value
from 1 (least sharp) to 16 (sharpest).
3. Select NEXT PAGE and click Enter.
4. Under SHARPNESS RESTRAIN, click the left / right arrow keys to fine-tune the image
sharpness. Select a value from 1 (least sharp) to 16 (sharpest).
#LX400097; r.45718/45804; en-US
13
Using the On-Screen Display (OSD) Menu for C346ZC252
1
1.3.15 Digital Zoom
The camera uses 25x optical zoom to capture a subsection of the camera image in great
detail. If you want to zoom in even closer, the camera also features 16x digital zoom. By
default, digital zoom is turned off.
To enable digital zoom:
1. Use the on-screen arrow keys to navigate to CAMERA SETTING and click Enter.
2. Select NEXT PAGE and click Enter.
3. Under DIGITAL ZOOM, click the left / right arrow keys to turn on digital zoom.
1.3.16 Picture Flip
You can manually rotate the camera image 180° using the PICTURE FLIP feature.
To enable picture flip:
1. Use the on-screen arrow keys to navigate to CAMERA SETTING and click Enter.
2. Select NEXT PAGE and click Enter.
3. Under PICTURE FLIP, click the left / right arrow keys to turn on picture flip (rotate the
image 180°).
1.3.17 Lens Initialization
Performing a lens initialization resets the camera lens.
To initialize the lens:
1. Use the on-screen arrow keys to navigate to CAMERA SETTING and click Enter.
2. Select NEXT PAGE and click Enter.
3. Select LENS INIT and click Enter. The camera image disappears momentarily while
the lens initializes.
1.3.18 Picture Mode
Choose the resolution and frame rate of the camera’s live view.
To set picture mode:
1. Use the on-screen arrow keys to navigate to CAMERA SETTING and click Enter.
2. Select NEXT PAGE and click Enter.
#LX400097; r.45718/45804; en-US
14
Using the On-Screen Display (OSD) Menu for C346ZC252
1
3. Under PICTURE MODE, click the left / right arrow keys to select the resolution and
frame rate for the live video stream. North American users should select one of the pic-
ture modes listed under NTSC, while European users should use one of the PAL pic-
ture modes.
NTSC:
• 720P / 30: 720p resolution @ 30 frames per second (recommended).
• 720P / 60: 720p resolution @ 60 frames per second.
• 1080P / 30: 1080p resolution @ 30 frames per second.
PAL:
• 720P / 25: 720p resolution @ 25 frames per second.
• 720P / 50: 720p resolution @ 50 frames per second.
• 1080P / 25: 1080p resolution @ 25 frames per second.
1.3.19 Camera Factory Defaults
Restore the camera module to its out-of-the-box state. This will reset all menu items in the
CAMERA SETTING menu back to their default values.
CAUTION
This step cannot be undone.
To restore camera factory defaults:
1. Use the on-screen arrow keys to navigate to CAMERA SETTING and click Enter.
2. Select NEXT PAGE and click Enter.
3. Select CAMERA FACTORY DEFAULTand click Enter.
1.3.20 Camera Restart
Restarts the camera module. This means that the camera’s PTZ module will restart with-
out the whole camera powering off.
NOTE
Restarting the camera module does not affect OSD menu settings.
To restart the camera module:
1. Use the on-screen arrow keys to navigate to CAMERA SETTING and click Enter.
2. Select NEXT PAGE and click Enter.
3. Select CAMERA RESTARTand click Enter.
1.4 Function Settings
Use the function settings menu to configure preset locations, patterns and tours for the
camera, as well as set menu options such as idle time and password.
#LX400097; r.45718/45804; en-US
15
Using the On-Screen Display (OSD) Menu for C346ZC252
1
Function Settings — Menu Structure:
PRESET PRESET NO
1–300
TITLE
PRESET1–PRESET300
SETTING Set the camera’s current position for the selected
preset.
CALL The camera automatically moves to the position of
the currently selected preset.
AUTO PAN PAN SPEED
1–8
RUN
Camera starts panning.
STOP Camera stops panning.
AUTO SCAN AUTO SCAN NO
1–5
SET LEFT LIMIT Sets the current viewing angle as the left limit for
the current auto-scan.
SET RIGHT LIMIT Sets the current viewing angle as the right limit for
the current auto-scan.
SCAN SPEED
1–8
CALL
Begins the selected auto-scan pattern.
STOP Stops auto-scanning
TOUR TOUR NO
1–8
SETTING Configure a custom tour using 2 or more of your
preset locations.
DELETE Deletes currently selected tour.
CALL Begins the selected tour.
STOP Stops the tour.
PATTERN PATTERN NO
1–5
PROGRAM START Begins tracking the camera’s movement for the
creation of a pattern.
PROGRAM STOP Stops tracking camera movement and ends the
current pattern.
CALL
Begins the selected pattern.
STOP Stops the pattern.
IDLE MOTION IDLE FUNCTION ON / OFF
IDLE TIME 1MIN–720MIN
IDLE ACTION
• PRESET
• SCAN
• TOUR
• PATTERN
• NONE
PARAMETER Values change depending on IDLE ACTION
setting:
• PRESET: 1–300
• SCAN: 1–5
• TOUR: 1–8
• PATTERN: 1–5
• NONE: NONE
#LX400097; r.45718/45804; en-US
16
/
