DAP Audio D145082B User manual
- Category
- Smartwatches
- Type
- User manual
ER-1193B
ORDERCODE D145073B
ORDERCODE D145082B
Highlite International B.V.
Vestastraat 2
6468 EX Kerkrade
The Netherlands
1
Congratulations!
You have bought a great, innovative product from DAP Audio.
The DAP Audio ER-1193B brings excitement to any venue. Whether you want simple plug-&-play action or
a sophisticated show, this product provides the effect you need.
You can rely on DAP Audio, for more excellent audio products.
We design and manufacture professional audio equipment for the entertainment industry.
New products are being launched regularly. We work hard to keep you, our customer, satisfied.
For more information: iwant@dap-audio.info
You can get some of the best quality, best priced products on the market from DAP Audio.
So next time, turn to DAP Audio for more great audio equipment.
Always get the best -- with DAP Audio !
Thank you!
2
DAP Audio
DAP Audio ER-1193B™ Product Guide
Warning ........................................................................................................................................................................... 3
Unpacking Instructions ............................................................................................................................................. 3
Safety Instructions ..................................................................................................................................................... 3
Operating Determinations ....................................................................................................................................... 4
Return Procedure ...................................................................................................................................................... 4
Claims ......................................................................................................................................................................... 4
Description of the device ............................................................................................................................................. 5
Features ...................................................................................................................................................................... 5
Overview .................................................................................................................................................................... 5
Installation ...................................................................................................................................................................... 6
Set Up and Operation .................................................................................................................................................. 6
Menu Options ............................................................................................................................................................ 6
Frequency Set Menu ............................................................................................................................................ 6
Scan Menu ............................................................................................................................................................ 7
Approval ......................................................................................................................................................................... 9
CE Certificate ............................................................................................................................................................... 10
Connection Cables ..................................................................................................................................................... 12
Maintenance ................................................................................................................................................................ 13
Troubleshooting ........................................................................................................................................................... 13
Product Specification .................................................................................................................................................. 14
3
Warning
FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY
BEFORE YOUR INITIAL START-UP!
Unpacking Instructions
Immediately upon receiving this product, carefully unpack the carton and check the contents to ensure
that all parts are present, and have been received in good condition. Notify the dealer immediately and
retain packing material for inspection if any parts appear damaged from shipping or the carton itself
shows signs of mishandling. Save the carton and all packing materials. In the event that a fixture must be
returned to the factory, it is important that the fixture be returned in the original factory box and packing.
Your shipment includes:
• 1x DAP ER-1193B
• 2x Antenna
• 1x AC-adapter DC12V/500mA
• 1x Jack cable 1,5m
• This user manual
Safety Instructions
Every person involved with the installation, operation and maintenance of this system has to:
- be qualified
- follow the instructions of this manual
Before you initial start-up, please make sure that there is no damage caused by transportation. Should
there be any, consult your dealer and do not use the system.
To maintain perfect condition and to ensure a safe operation, it is absolutely necessary for the user to
follow the safety instructions and warning notes written in this manual.
Please consider that damages caused by manual modifications to the system are not subject to
warranty.
This system contains no user-serviceable parts. Refer servicing to qualified technicians only.
IMPORTANT:
The manufacturer will not accept liability for any resulting damages caused by the non
observance of this manual or any unauthorized modification to the system.
Never remove warning or informative labels from the unit.
Never use anything to cover the ground contact.
Never leave any cables lying around.
Do not connect this system to a dimmerpack.
Do not switch the system on and off in short intervals, as this would reduce the system’s life.
Do not open the device and do not modify the device.
Only use system indoor, avoid contact with water or other liquids.
Avoid flames and do not put close to flammable liquids or gases.
CAUTION!
Keep this system away from rain and moisture!
CAUTION! Be careful with your operations.
With a dangerous voltage you can suffer
a dangerous electric shock when touching the wires!
4
Always disconnect power from the mains, when system is not used.
Only handle the AC-adaptor by the plug. Never pull out the adaptor by tugging the cord.
Make sure you don’t use the wrong kind of cables or defective cables.
Make sure that the power adaptor matches the voltage and current stated on the rear panel.
Make sure that the power adapter housing and cord is not damaged.
Please turn off the power of all equipment before making connections to other devices.
If system is dropped or struck, disconnect the power adaptor immediately. Have a qualified
engineer inspect for safety before operating.
If the system has been exposed to drastic temperature fluctuation (e.g. after transportation), do
not switch it on immediately. The arising condensation water might damage your system. Leave
the system switched off until it has reached room temperature.
If your Dap Audio device fails to work properly, discontinue use immediately. Pack the unit
securely (preferably in the original packing material), and return it to your Dap Audio dealer for
service.
Repairs, servicing and electric connection must be carried out by a qualified technician.
For replacement use fuses of same type and rating only.
Operating Determinations
If this system is operated in any other way, than the one described in this manual, the product may suffer
damages and the warranty becomes void.
Any other operation may lead to dangers like short-circuit, burns, electric shock, etc.
Return Procedure
Returned merchandise must be sent prepaid and in the original packing, call tags will not be issued.
Package must be clearly labeled with a Return Authorization Number (RMA number). Products returned
without an RMA number will be refused. Highlite will not accept the returned goods or any responsibility.
Call Highlite 0031-455667723 or mail aftersales@highlite.nl and request an RMA prior to shipping the
device. Be prepared to provide the model number, serial number and a brief description of the cause for
the return. Be sure to properly pack the device, any shipping damage resulting from inadequate
packaging is the customer’s responsibility. Highlite reserves the right to use its own discretion to repair or
replace product(s). As a suggestion, proper UPS packing or double-boxing is always a safe method to
use.
Note: If you are given an RMA number, please include the following information on a piece of paper
inside the box:
1) Your name
2) Your address
3) Your phone number
4) A brief description of the symptoms
Claims
The client has the obligation to check the delivered goods immediately upon delivery for any short-
comings and/or visible defects, or perform this check after our announcement that the goods are at their
disposal. Damage incurred in shipping is the responsibility of the shipper; therefore the damage must be
reported to the carrier upon receipt of merchandise.
It is the customer's responsibility to notify and submit claims with the shipper in the event that a device is
damaged due to shipping. Transportation damage has to be reported to us within one day after receipt
of the delivery.
Any return shipment has to be made post-paid at all times. Return shipments must be accompanied with
a letter defining the reason for return shipment. Non-prepaid return shipments will be refused, unless
otherwise agreed in writing.
Complaints against us must be made known in writing or by fax within 10 working days after receipt of the
invoice. After this period complaints will not be handled anymore.
Complaints will only then be considered if the client has so far complied with all parts of the agreement,
regardless of the agreement of which the obligation is resulting.
5
Description of the device
Features
The ER1193 is a single Channel 193 Freq. PLL Receiver
• 193 selectable UHF Frequencies.
• Available for 1 transmitter.
• True diversity technology permits minimum dropouts in the RF link.
• PLL synthesized technology for multi-channels.
• Compact half-rack metal housing for space saving.
Overview
Fig. 1
1) Volume Control
2) Display
3) Up Button
4) Set Button
5) Down Button
6) Power On/Off Switch
7) Cable Hook
8) Power Input Connector 12-18V/200mA
9) Audio Output Connector Unbalanced 1/4” jack plug connector
10) Audio Output Connector Balanced XLR connector male
11) Antenna A connector.
12) Antenna B connector.
6
Installation
Remove all packing materials from the ER-1193B. Check that all foam and plastic padding is removed.
Put the 2 antennas into socket A and B at the backside in a vertical angle.
Always disconnect from electric mains power supply before cleaning or servicing.
Damages caused by non-observance are not subject to warranty.
Set Up and Operation
Before plugging the unit in, always make sure that the power supply matches the product specification
voltage. Do not attempt to operate a 120V specification product on 230V power, or vice versa.
Press the powerswitch to turn the ER-1193B on.
Fig. 4
13) A Receiving Channel Indicator
14) Mute Indicator
15) Audio Frequency Indicator
16) Signal Channel Indicator
17) RF Indicator
18) B Receiving Channel Indicator
Menu Options
1. Frequency
2. Scan
Frequency Set Menu
Press the set(4) button for 3 seconds, the LCD shows:
7
after a second the display shows:
You can now change the frequency with the up(3) or down(5) buttons (steps of 0.250 MHz to change the
frequency). To confirm you have to press the set(4) button. Now the display will briefly look as shown
below.
If you don’t press the set(4) button, FREQ in the LCD display will keep flashing.
Scan Menu
Press the set(4) button for three 3 seconds. Now you’re in the Frequency set menu, press the set(4) button
again to enter Scan Mode, the LCD shows:
after a second the display shows:
8
By pressing either the up(3) or down(5) button the system will start a forward or a downward search until
the system finds a wireless transmitter with sufficient signal strength. If a signal of sufficient strength is
found, the display will show STORE as shown below.
Press the set(4) button to store the frequency.
Pressing the set button again will abort the scan mode. The display will briefly look as shown below:
9
Approval
The DAP D145073B and the D145082B are Class II wireless devices.
D145073B: 740-764 MHz for use in: Austria, Belgium, Denmark, France, Luxemburg, Netherlands,
Poland, Sweden, Switzerland, Turkey.
D145082B: 822–846 MHz for use in: Germany, France, Luxemburg, Poland, Turkey.
Exclusion of liability
The frequency tables in this publication are made according to national laws and regulations. The
frequencies are checked on a regular basis. We don’t take any responsibility for eventual discrepancies
between our listed frequencies and the frequencies actually approved in a given country. We strongly
suggest you to inform in your own country or region for any changes or adaptions regarding the allowed
frequencies.
Be aware that in some countries, you are only allowed to partly use the frequency range of the device. If
your country is not listed above it is still possible that there are exceptions. Therefore, we strongly advise
you to consult your local authority as listed below:
Telecoms & Postal Regulatory Authorities in Europe
Austria: Rundfunk und Telekom Regulierungs-GmbH www.rtr.at
Belgium: Belgian Institute of postal services and telecommunications (BIPT) www.bipt.be
Czech Republic: Czech Telecommunication Office www.ctu.cz
Denmark: National Telecom Agency www.tst.dk
Finnland: Finnish Communications Regulatory Authority (FICORA) www.ficora.fi
France: Autorité de Régulation des Télécommunications (ART) www.art-telecom.fr
Germany: Die Bundesnetzagenturie www.bundesnetzagentur.de
Greece: National Telecommunications Commission (EET) www.eett.gr
Hungary: Communication Authority (HIF) www.hif.hu
Iceland: Post and Telecom Administration (PTA) www.pta.is
Ireland: Commission for Communications Regulation (ComReg) www.comreg.ie
Italy: Italian Communications Authority (AGC) www.agcom.it
Latvia: Telecommunication State Inspection www.vei.lv
Liechtenstein: Office for Communications (AK) www.ak.li
Lithuania: Radio Administration www.rrt.lt
Luxembourg: Institut Luxembourgeois des Télécommunications (ILT) www.etat.lu/ILT
Netherlands: Onafhankelijke Post en Telecommunicatie Autoriteit (OPTA) www.opta.nl
Agentschap Telecom www.agentschap-telecom.nl
Ministry of Economic Affairs www.ez.nl
Norway: Norwegian Post and Telecommunications Authority (NPT) www.npt.no
Poland: Urzad Regulacji Telekomunikacji (URT) www.urt.gov.pl
Portugal: Autoridad Nacional De Comunicaçòes (ICP-Anacom) www.anacom.pt
Slovenia: Agencija za telekomunikacije, radiodifuzijo in pošto www.atrp.si
Name
Address
Highlite International BV
Vestastraat 2
6468EX
Kerkrade
Supplier Details
Product Name
Ordercode
The Netherlands
ER-1193B 1Ch 193 Freq 740-764 MHz PPL Receiver Black
Product Details
Trade Name
D145073B
DAP AUDIO
R&TTE Di i 1999/5/EC
Applicable Standards Details
R&TTE Di
rect
i
ves
:
1999/5/EC
Applied Specifications / Standards
Safety EN 60065: 2002+A1: 2006 +A11: 2008
EN 50371: 2002
EMC EN 301 489-1 V 1.8.1
EN 301 489-9 V 1.4.1
RF Spectrum EN 300 422-2V 1.2.2
The product shall be marked with the CE conformity marking
and our Notified Body number as shown on the right.
1856
Th f i b d d i ifi d b
TÜV Rh i l d
(N ifi d B d )
Supplementary Information
I hereby declare under our sole responsibility
that the product mentioned above to which this
declaration relates complies with the above mentioned
standards
and
Directives
Name Issued Date
Declaration
S. ildiz Dec. 17, 2010
Th
e
con
f
orm
i
t
y
to
a
b
ove
stan
d
ar
d
s
i
s
ver
ifi
e
d by
TÜV Rh
e
i
n
l
an
d
(N
ot
ifi
e
d B
o
dy)
.
standards
and
Directives
Signature of representative
Highlite International BV.
Vestastraat 2, 6468 EX Kerkrade,
The Netherlands
Name
Address
Highlite International BV
Vestastraat 2
6468EX
Kerkrade
Supplier Details
Product Name
Ordercode
The Netherlands
ER-1193B 1Ch 193 Freq 822-846 Black
Product Details
Trade Name
D145082B
DAP AUDIO
R&TTE Di i 1999/5/EC
Applicable Standards Details
R&TTE Di
rect
i
ves
:
1999/5/EC
Applied Specifications / Standards
Safety EN 60065: 2002+A1: 2006 +A11: 2008
EN 50371: 2002
EMC EN 301 489-1 V 1.8.1
EN 301 489-9 V 1.4.1
RF Spectrum EN 300 422-2V 1.2.2
The product shall be marked with the CE conformity marking
and our Notified Body number as shown on the right.
1856
Th f i b d d i ifi d b
TÜV Rh i l d
(N ifi d B d )
Supplementary Information
I hereby declare under our sole responsibility
that the product mentioned above to which this
declaration relates complies with the above mentioned
standards
and
Directives
Name Issued Date
Declaration
S. ildiz Dec. 17, 2010
Th
e
con
f
orm
i
t
y
to
a
b
ove
stan
d
ar
d
s
i
s
ver
ifi
e
d by
TÜV Rh
e
i
n
l
an
d
(N
ot
ifi
e
d B
o
dy)
.
standards
and
Directives
Signature of representative
Highlite International BV.
Vestastraat 2, 6468 EX Kerkrade,
The Netherlands
12
Connection Cables
Take care of your cables, always holding them by the connectors and avoiding knots and twists when
coiling them: This gives the advantage of increasing their life and reliability.
Periodically check your cables. A great number of problems (faulty contacts, ground hum, discharges,
etc.) are caused entirely by using unsuitable or faulty cables.
Headphones Unbalanced mono Balanced mono Insert
13
Compensation of interference with balanced connections
Maintenance
The DAP Audio ER-1193B requires almost no maintenance. However, you should keep the unit clean.
Disconnect the mains power supply, and then wipe the cover with a damp cloth. Do not immerse in
liquid. Do not use alcohol or solvents.
Keep connections clean. Disconnect electric power, and then wipe the audio connections with a damp
cloth. Make sure connections are thoroughly dry before linking equipment or supplying electric power.
Troubleshooting
DAP Audio ER-1193B
This troubleshooting guide is meant to help solve simple problems. If a problem occurs, carry out the steps
below in sequence until a solution is found. Once the unit operates properly, do not carry out following
steps.
1. If the device does not operate properly, unplug the device.
2. Check power from the wall, all cables, the fuse, etc.
3. If all of the above appears to be O.K., plug the unit in again.
4. If nothing happens after 30 seconds, unplug the device.
5. Return the device to your DAP Audio dealer.
14
Product Specification
Model: DAP Audio ER-1193B
Operation Voltage: 12-18 VDC, 200 mA
Dimensions: 211 x 152 x 40mm (LxWxH)
Weight: 1,08 Kg
Frequency Preparation: PLL Synthesized Control
Carrier Frequency range: 502 MHz - 960 MHz
Frequency Stability: ±0.005%
S/N Ratio: >100 dB
Display: LCD
Display Contents: Frequency, Antenna A/B, Mute display, RF/AF Lever Meter, battery fuel gauge
Controls: Power On/Off, Frequency Up/down Frequency Scan, Audio Level
Audio Output Level: -12 dB
AF Output Impedance: 600 Ohm
Squelch: Pilot Tone & Noise Mute
Output Connector: XRL Balanced/ 6,3 mm Unbalanced
Design and product specifications are subject to change without prior notice.
Website: www.Dap-audio.info
Email: [email protected]
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
DAP Audio D145082B User manual
- Category
- Smartwatches
- Type
- User manual
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
