- 3 -
1. SPECIFICATIONS
1-1 LFXC24796*
DOOR DESIGN
DIMENSIONS (inches)
NET WEIGHT (pounds)
COOLING SYSTEM
TEMPERATURE CONTROL
DEFROSTING SYSTEM
DOOR FINISH
HANDLE TYPE
INNER CASE
INSULATION
ITEMS
Side Rounded
35
3
/4
X 30
7
/8
X 70
1
/4
(WXDXH) 23.5cu.ft.
148kg (326lb)
Fan Cooling
Micom Control
Full Automatic
Heater Defrost
PCM, VCM, Stainless
Bar
ABS Resin
Polyurethane Foam
SPECIFICATIONS
。。
23.5 cu.ft.
VEGETABLE TRAY
COMPRESSOR
EVAPORATOR
CONDENSER
REFRIGERANT
LUBRICATING OIL
DEFROSTING DEVICE
ITEMS
Clear Drawer Type
Linear
Fin Tube Type
Spiral Condenser
R-134a (135 g)
ISO10 (280 ml)
SHEATH HEATER
LED Module
LED Module
SPECIFICATIONS
LAMP
REFRIGERATOR
FREEZER
。。
DIMENSIONS
Depth w/ Handles
Depth w/o Handles
Depth w/o Door
Depth (Total with Door Open)
Height to Top of Case
Height to Top of Door Hinge
Width
Width (door open 90 deg. w/o handle)
Width (door open 90 deg. w/ handle)
A
B
C
D
E
F
G
H
I
30 7/8 in
28 3/8 in
24 1/8 in
42 3/4 in
68 7/8 in
70 1/4 in
35 3/4 in
40 in
44 1/4 in
Description LFXC24766*
- 3 -
1. SPECIFICATIONS
1-1 LFXC24796*
DOOR DESIGN
DIMENSIONS (inches)
NET WEIGHT (pounds)
COOLING SYSTEM
TEMPERATURE CONTROL
DEFROSTING SYSTEM
DOOR FINISH
HANDLE TYPE
INNER CASE
INSULATION
ITEMS
Side Rounded
35
3
/4
X 30
7
/8
X 70
1
/4
(WXDXH) 23.5cu.ft.
148kg (326lb)
Fan Cooling
Micom Control
Full Automatic
Heater Defrost
PCM, VCM, Stainless
Bar
ABS Resin
Polyurethane Foam
SPECIFICATIONS
。。
23.5 cu.ft.
VEGETABLE TRAY
COMPRESSOR
EVAPORATOR
CONDENSER
REFRIGERANT
LUBRICATING OIL
DEFROSTING DEVICE
ITEMS
Clear Drawer Type
Linear
Fin Tube Type
Spiral Condenser
R-134a (135 g)
ISO10 (280 ml)
SHEATH HEATER
LED Module
LED Module
SPECIFICATIONS
LAMP
REFRIGERATOR
FREEZER
。。
DIMENSIONS
Depth w/ Handles
Depth w/o Handles
Depth w/o Door
Depth (Total with Door Open)
Height to Top of Case
Height to Top of Door Hinge
Width
Width (door open 90 deg. w/o handle)
Width (door open 90 deg. w/ handle)
A
B
C
D
E
F
G
H
I
30 7/8 in
28 3/8 in
24 1/8 in
42 3/4 in
68 7/8 in
70 1/4 in
35 3/4 in
40 in
44 1/4 in
Description LFXC24766*
CLEARANCES
▲
! Make sure the location of the water supply pipe is within the marked range.
▲
! Before connecting the power, always make sure to ground the product. (If the
product is not grounded, the user may be able to feel the electricity due to the
minute leakage current when touching the refrigerator door handle or side corner
even when there is no issue with the product.)
▲
! Do not ground the product to gas pipe, plastic water pipe or telephone wire etc. It
can cause electric shock and explosion.
CONNECTING POWER AND SECURING SPACE
FOR WATER SUPPLY PIPE
Power connection
The location of the 115V 60Hz power
connector must be located on the rear side
of the product as shown in the picture.
When installing the product, make sure to
check whether the cord is hung on the hook
on the rear side so that it is not pressed on
the refrigerator. Damaged power cord can
cause a re.
Installation space for
water supply pipe
Place the water hose for ice maker and water dispenser as shown in the picture, and
prepare hose to come up from the oor. (Copper pipe with diameter of 5/16”(8mm) is
recommended for the water hose.) If the water pipe and water hose is located far from
the product, bury the water hose on the oor and provide appropriate treatment.
TOP
BACK
2"1"
LFXC24796*
QUICK INSTALL &
CLEARANCES
For full installation directions/clearances
please refer to the corresponding
User Manual and Installation Guide.
DIMENSIONS/CLEARANCES/WEIGHT
A Depth with Handles 30-7/8"
B Depth without Handles 28-3/8"
C Depth without Door 24-1/8"
D Depth (Total with Door Open) 42-3/4"
E Height to Top of Case 68-7/8"
F Height to Top of Door Hinge 70-1/4"
G Width 35-3/4"
H Width (Door Open 90˚ without Handle) 40"
I Width (Door Open 90˚ with Handle) 44-1/4"
Installation Clearance Top 1", Back 2"
Weight (Unit/Carton) 333 lbs / 383 lbs.
Carton Dimensions (WxHxD) 38" x 73" x 33"
LG Brand_3 Door Refrigerators Fin_1.indd 22 8/22/17 10:26 AM