Power Fist 8474801 is a 2 in. Bore Tie Rod Cylinder Seal Kit containing all the seals necessary to rebuild the cylinder. It has Nitrile O-Ring Seals, a Piston Polyoxymethylene Back-Up Washer, Polyurethane (PU) Seals, and a Polyurethane (PU) Wiper Seal. Before using, lubricate the seals with hydraulic oil, being careful not to cut or damage them. Then, simply disassemble the cylinder per the included instructions and replace the seals shown in Fig. 1.
Power Fist 8474801 is a 2 in. Bore Tie Rod Cylinder Seal Kit containing all the seals necessary to rebuild the cylinder. It has Nitrile O-Ring Seals, a Piston Polyoxymethylene Back-Up Washer, Polyurethane (PU) Seals, and a Polyurethane (PU) Wiper Seal. Before using, lubricate the seals with hydraulic oil, being careful not to cut or damage them. Then, simply disassemble the cylinder per the included instructions and replace the seals shown in Fig. 1.
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
Power Fist 8474801 is a 2 in. Bore Tie Rod Cylinder Seal Kit containing all the seals necessary to rebuild the cylinder. It has Nitrile O-Ring Seals, a Piston Polyoxymethylene Back-Up Washer, Polyurethane (PU) Seals, and a Polyurethane (PU) Wiper Seal. Before using, lubricate the seals with hydraulic oil, being careful not to cut or damage them. Then, simply disassemble the cylinder per the included instructions and replace the seals shown in Fig. 1.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
in other languages
Related papers
-
Power Fist 8474835 Owner's manual
-
-
-
-
-
-
-
-
-
