Trendnet TK-IP101 Owner's manual

Brand: Trendnet

Model: TK-IP101

Category: KVM switches

Type: Owner's manual

TK-IP101

Quick Installation Guide

Table of Contents

English ......................................................................................................

1. Before You Start

2. How to Install .....................................................................................

3. Configure the TK-IP101 .....................................................................

4. Operation ...........................................................................................

.................................................................................

Table of Contents

Version 07.13.2007

Troubleshooting ........................................................................................

System Requirements

Package Contents

1. Before You Start

English

TK-IP101

Quick Installation Guide

Utility CD-ROM?

1 Set of 3-in-one KVM cables

RJ-12 to RS-232 (Female) Serial

Cable (Console Management)

RJ-12 to RS-232 (Male) Serial

Cable (Power Control Cable)

RJ-12 to DB-25 Modem Serial Cable

Type A to Type B USB Cable

AC Power Adapter (9V DC, 2A)

Power Cord

PS/2 Keyboard

PS/2 Mouse

VGA or SVGA Compatible Monitor

RJ-45 network cable

Windows 98SE/ME/2000/XP/2003 Server/Vista, Linux, and Mac OS.

Internet Explorer 5.5 or above

Java 1.2 or above

KVM switch (e.g. TK-200K, TK-204K, TK-205K, TK-207K, TK-209K,

TK-210K, TK-400K, TK-401R, TK-403R, TK-407K, TK-409K, TK-801R,

TK-802R, TK-803R, TK-1601R, TK-1602R, TK-1603R) (Optional)

Application

English

KVM

10/100Mbps

PS/2 Keyboard

Mouse

PS/2

USB KVM Switch

(TK-803R)

8-Port Rack Mount

Workstations

16-Port 10/100Mbps

Fast Ethernet Switch

(TE100-S16)

Cable/DSL 4-Port

Broadband Router

(TW100-S4W1CA)

in France

Workstation

in Taiwan

Workstation

in USA

1-Port KVM

over IP Switch

(TK-IP101)

Internet

Monitor

Modem

2. How to Install

1. Turn off your computer and

disconnect all power cords.

2. Connect the shared keyboard and

mouse to the keyboard and

mouse port.

4. Use the provided KVM cables to

connect your Computer to the

PC/KVM port on the TK-IP101.

3. Connect the shared monitor to the

Monitor port.

Connecting a Single Computer

To TK-IP101

To Computer

English

5. Connect an Ethernet cable from

the Ethernet port on the TK-IP101

to the Ethernet port on your

switch/router.

6. Plug the power adapter into the

TK-IP101.

2. Connect the shared keyboard and

mouse to the keyboard and

mouse port.

7. Turn ON your computer and wait

until startup completes.

1. Turn off your computer and

disconnect all power cords.

Connecting Multiple Computers

English

3. Connect the shared monitor to the

Monitor port.

5. Connect an Ethernet cable from

the Ethernet port on the TK-IP101

to the Ethernet port on your

switch/router.

7. Refer to your KVM switch's quick

installation guide for connecting

your computer to the KVM switch.

6. Plug the power adapter into the

TK-IP101.

To TK-IP101

To KVM Switch Console port

Your installation is now complete.

To ensure the highest level of customer service and support, please take a moment to

Thank you for choosing TRENDnet

English

4. Connect one end of the provided

KVM cable to the PC/KVM port on

the TK-IP101. Connect the other

end of the provided KVM cable to

your KVM switch's console port.

English

1. Open your web browser, type

https://192.168.1.200:5908 in the

Address bar, and then press Enter.

3. Configure the TK-IP101

Note:

1. It is recommended that you configure the TK-IP101 by connecting it directly

to your computer using a Ethernet cable. Before the TK-IP101 can be

configured, a static IP address must be assigned to your computer’s

network adapter in the subnet of 192.168.1.x. Since the TK-IP101’s default

IP address is 192.168.1.200, make sure no other network devices are

assigned an IP address of 192.168.1.200. (Refer to Troubleshooting

section on how to configure TCP/IP settings on your PC.)

2. The default port base is 5900. The port base is used for viewing through the

IPViewer. The port base + 8 (5908) is used to access the browser

configuration of the TK-IP101. Please refer to the User Guide on the Utility

CD-ROM for more information.

3. Enter the User name and

Password, and then click Log in.

By default:

User Name: superuser

Password: superu

2. Click Yes.

English

4. Click Main and then click LAN

TCP/IP. Configure the settings to

be in the same subnet as your

network. Then click Store

Settings.

5. Click KVM Server > Main

Settings. If you have a TRENDnet

KVM switch connected to the

TK-IP101, select the Model from

the drop down list, select the

number of computers and then

click Store Settings.

6. Click KVM Server > KVM Switch

Database. Select the fixed part of

your KVM switch's hot key under

escape hot key sequence. For

example, if the Hot Key Sequence

of your KVM switch is Scroll-Lock

Scroll-Lock + [Port Number],

then select SCRLK for the first two

dropdown menus. Then click

Store.

7. Click Apply Settings, and then

click Restart Servers to save all

settings.

3. Click Run.

4. Click Run.

5. Follow the IPViewer Setup

Wizard instructions and then click

Finish.

1. Follow step 1, 2, and 3 in section 3

to log on to the browser

configuration.

2. Click Download and then

Viewers. Then click Download.

English

4. Operation

Viewing Locally

Windows

8. Type in the Login user ID and

password and click OK.

Password: superu

6. Double click the IPViewer icon.

English

7. Type in 192.168.1.200:5900 and

click OK.

Java

1. Follow step 1, 2, and 3 in section 3

to log on to the browser

configuration.

2. Click Download and then

Viewers. In the JavaTM section,

click Download.

4. Type in 192.168.1.200:5900 and

click OK.

5. Type in the Login user ID and

password and click OK.

Password: superu

English

2. Follow the steps in the Viewing

Locally section above for installing

and opening up the viewer.

1. Logon to your router and open

ports 5900~5909. Please refer to

your router's manual or contact

your network administrator for

more information.

Viewing Remotely

3. Click Open.

3. Type in [your public ip

address]:5900 (for example:

82.165.130:180: 5900) and click

OK. If you do not know your public

IP address, please contact your

network administrator or Internet

Service Provider for more

information.

4. Type in the Login (user ID) and

password and click OK.

Password: superu

English

Q1:

Q2:

A2:

Q3:

A3:

How do I configure TCP/IP settings on my computer?

I typed https://192.168.1.200:5908 in my Internet Browser's Address Bar, but

an error message says “The page cannot be displayed.” How can I get into the

TK-IP101 web configuration page?

First, check your hardware settings again by following the instructions in

section 2. Second, make sure the power and link lights are lit. Third, make sure

the TCP/IP settings are configured properly (see Q1). Fourth, since the

TK-IP101’s default IP address is 192.168.1.200, make sure that no other network

devices are assigned an IP address of 192.168.1.200:5908

I have the KVM switch connected properly, but my keyboard and mouse don’t

work. What should I do?

First, make sure the power adapter is plugged into your KVM switch. Second,

make sure your PS2 or USB ports are working properly by connecting your mouse

and keyboard directly to the PS/2 or USB port computer. Third, once you confirm

that the PS/2 or USB ports are functional, please reboot your computers, and try to

use the KVM switch again. Fourth, if your computer is running Windows 98SE,

you may need to download and install the USB hot fix. Please go tothis link for

download and installation instructions: http://support.microsoft.com/kb/q240075.

Once the hot fix is installed, follow the installation instructions in Section 2.

Troubleshooting

1. Go into the Control Panel and double-

click the Network Connections icon,

right-click the Local Area Connection

icon and then click Properties.

2. Click Internet Protocol (TCP/IP) and

then click Properties. Then click on

Use the following IP address, and

make sure you assign your network

adapter an IP address in the subnet of

192.168.1.x.

Q4:

A4:

Q5:

A5:

Q6:

A6:

Q7:

A7:

Q8:

A8:

The video is bad or grainy. What should I do?

First, make sure the cables are securely connected. Second, the maximum

resolution supported is 1600 x 1200. If the resolution configured on your computer

is higher, you must change it to a lower resolution. Contact your operating

system support for more instructions

I am unable to switch between computers using my KVM Switch’s hot keys.

What should I do?

Press on the Num Lock key for 5 seconds to activate the hot keys.

The cursor on the local computer and the remote computers in the IPviewer

are not aligned. What should I do?

Go to your mouse properties and go to pointer options. Set the pointer speed

is set to the middle, uncheck enhanced pointer precision and uncheck

Automatically move pointer to the default button in a dialog box. In the IPviewer,

press the mouse synchronization hot key. By default, the hot key is CTRL CTRL

Home. If your keyboard does not have a CTRL or Home Key, log on to browser

configuration (see Section 3), click KVM Server, click IPViewer Connection and

select the desired key for the IPViewer Hot Keys and Mouse Resynchronize Key.

I forgot the administration password. How do I reset my TK-IP101?

Press on the reset button using a pen or paperclip for 10 seconds. The

default password is admin.

How can I view my computers remotely?

First, open up ports 5900 to 5909 on your router. Contact the router

manufacturer or your network administrator for more information. Second, type in

http://[your public ip address]:5908 in your browser. Third, follow the Windows or

Java instruction in Section 3 for installing the viewer. Fourth, when the connection

details window appears, type in your public IP address: 5900.

If you still encounter problems or have any questions regarding the TK-IP101, please

contact TRENDnet’s Technical Support Department.

Certifications

This equipment has been tested and found to comply with FCC and CE Rules.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference.

(2) This device must accept any interference received. Including interference that may

cause undesired operation.

NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV

INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS

EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO

OPERATE THE EQUIPMENT.

Waste electrical and electronic products must not

be disposed of with household waste. Please

recycle where facilities exist. Check with you Local

Authority or Retailer for recycling advice.

ADVERTENCIA

En todos nuestros equipos se mencionan claramente las caracteristicas del adaptador de

alimentacón necesario para su funcionamiento. El uso de un adaptador distinto al

mencionado puede producir daños fisicos y/o daños al equipo conectado. El adaptador

de alimentación debe operar con voltaje y frecuencia de la energia electrica domiciliaria

existente en el pais o zona de instalación.

Product Warranty Registration

Please take a moment to register your product online.

Go to TRENDnet’s website at http://www.trendnet.com/register

TRENDnet Technical Support

US Canada

24/7 Tech Support

Toll Free Telephone: 1(866) 845-3673

Europe (Germany France Italy Spain Switzerland UK)

English/Espanol - 24/7

Francais/Deutsch - 11am-8pm, Monday - Friday MET

English/Espanol - 24/7

Francais/Deutsch - 11am-8pm, Monday - Friday MET

Worldwide

Telephone: +(31) (0) 20 504 05 35

Toll Free Telephone: +00800 60 76 76 67

. . . . .

20675 Manhattan Place

Torrance, CA 90501

USA

Trendnet TK-IP101 Owner's manual

Brand: Trendnet

Model: TK-IP101

Category: KVM switches

Type: Owner's manual

Download PDF

report

Trendnet TK-IP101 Owner's manual

Trendnet TK-IP101 Owner's manual

Related papers

Other documents