Alecto DC-700 User manual

Brand: Alecto

Model: DC-700

Type: User manual

Alecto DC-700 is a digital door viewer that combines a conventional door viewer with a 2.4" LCD display and a camera with a 120-degree field of vision. The device is easy to install and use, and it can be used to see who is at the door without having to open it. The DC-700 is also equipped with a low battery indicator, so you'll always know when it's time to replace the batteries.

Page is loading ...

-7-

TECHNICAL SPECIFICATIONS:

Alecto DC-700

Door viewer cylinder: Ø 14-22 mm

Door Thickness: 30-65 mm

Field of vision of the peephole: 170°

Field of vision of the camera: 120°

Screen:

2,4”

480x234 px.

Voltage supply: 3 x 1.5V AAA LR03

Dimensions: 95 x 95 x 15 mm

Weight: approx. 150g

Page is loading ...

-13-

TECHNICAL SPECIFICATIONS:

Alecto DC-700

Door viewer cylinder: Ø 14-22 mm

Door Thickness: 30-65 mm

Field of vision of the peephole: 170°

Field of vision of the camera: 120°

Screen:

2,4”

480x234 px.

Voltage supply: 3 x 1.5V AAA LR03

Dimensions: 95 x 95 x 15 mm

Weight: approx. 150g

Page is loading ...

-19-

TECHNICAL SPECIFICATIONS:

Alecto DC-700

Door viewer cylinder: Ø 14-22 mm

Door Thickness: 30-65 mm

Field of vision of the peephole: 170°

Field of vision of the camera: 120°

Screen:

2,4”

480x234 px.

Voltage supply: 3 x 1.5V AAA LR03

Dimensions: 95 x 95 x 15 mm

Weight: approx. 150g

-20-

OVERVIEW.

1. slide for door-eye cover

2. conventional door-eye

3. empty battery indicator

4. removable cover

5. 2.4” LCD display

6. power button

7. camera unit

8. door-eye

9. camera lens

10. mounting tool

11. measuring tool

1 2 3

4 5 6

7 8 9

10 11

-21-

DESCRIPTION.

The DC-700 is used as a door-eye with a conven-

tional peep-eye and a digital peep-eye with came-

ra and LCD display.

The DC-700 may replace the existing conventional

door-eye or you may drill a new hole for the DC-

700.

INSTALLATION PREPARATION:

1. Remove the old door-eye.

2. Use the supplied measuring

tool to check whether the

diameter of the current hole is

large enough (Ø14-22mm) for

tting the tube.

3. If the hole is not large enough or in case the-

re’s no hole, drill one of 14mm at eye height

into the door.

ATTENTION:

Keep in mind that the hole of the door-eye must be at eye

height, otherwise the image of the LCD display may not be

clear in certain circumstances.

-22-

INSTALLATION:

1. Use the supplied mounting tool to remove the

cover.

2. Loosen the tape cable from the LCD

screen.

3. Unscrew the mounting bus of the

camera unit.

4. Insert the screw thread of the tape

cable from the outside through the

hole to the inside. Ensure the tape

cable is rst inserted towards the in-

side and is then protruding on the inside. Now

carefully slide the tube into the hole.

AAA 1,5V

-23-

5. Connect the tape cable to the LCD unit on the

inside.

6. Slide the mounting tube through the mounting

hole of the LCD unit and carefully through the

hole in the door.

7. Use the supplied tool to carefully

screw the tube

into the tube

of the camera

unit until the LCD unit and

camera are secured.

8. Now insert 3x 1.5V AAA size batteries into the

battery compartment, paying attention to the

correct polarity.

9. Click the transfer cover back

onto the LCD unit.

10. The slide is used to cover

the hole of the door-eye.

AAA 1,5V

-24-

USE:

1. Press the power button on the LCD unit to

switch on the LCD display.

2. Via the camera on the outside of the door, the

image is transmitted and displayed on the LCD

display.

3. The LCD unit will switch o automatically after

20 seconds.

4. You can view the outside through the con-

ventional door-eye without activating the LCD

screen or without batteries. To do this, rst

slide open the cover.

5. The empty battery indicator will illuminate

when the batteries are nearly exhausted.

6. Don’t use abrasives to clean the housing; use

a soft moist cloth.

7. Don’t apply pressure when cleaning the LCD

display.

8. Remove the batteries when not using the

door-eye for a long period of time.

-25-

TECHNICAL SPECIFICATIONS:

Alecto DC-700

Door viewer cylinder: Ø 14-22 mm

Door Thickness: 30-65 mm

Field of vision of the peephole: 170°

Field of vision of the camera: 120°

Screen:

2,4”

480x234 px.

Voltage supply: 3 x 1.5V AAA LR03

Dimensions: 95 x 95 x 15 mm

Weight: approx. 150g

Page is loading ...

www.alecto.nlV1.1

Service

Help

Service Help

WWW.ALECTO.NL

SERVICE@ALECTO.NL

Hesdo, Australiëlaan 1

5232 BB, ‘s-Hertogenbosch

The Netherlands

WWW.ALECTO.NL

SERVICE@ALECTO.NL

Hesdo, Australiëlaan 1, 5232 BB,

‘s-Hertogenbosch,

The Netherlands

v3.0

Alecto DC-700 User manual

Brand: Alecto

Model: DC-700

Type: User manual

Download PDF

report

in other languages

français: Alecto DC-700 Manuel utilisateur
Deutsch: Alecto DC-700 Benutzerhandbuch
Nederlands: Alecto DC-700 Handleiding

Alecto DC-700 User manual

Alecto DC-700 User manual

in other languages

Related papers

Other documents