MAINTENANCE AND
STORAGE
Remove filter before cleaning
unit.
Plastic parts can be cleaned
with a
mild liquid detergent.
DO NOT WASH FILTER.
When the filter system will not be
used
for an extended period of
time; flush tap
water through the
filter, remove the
filter/cap
assembly from the bottle,
and
leave to dry thoroughly before
reassembling. Unit may now be
stowed
indefinitely.
ALL PLASTICS ARE FDA FOOD
GRADE
APPROVED, BPA-FREE, AND
NON-
LEACHING.
Exclusive filter is tested by EPA
and
State registered laboratories
and
meets or exceeds EPA/ANSI
protocols
and NSF Standards 42
and 53 by
Broward Testing
Laboratory.
Naturally increases the
alkalinity of source water up
to 9.5pH!
REMOVES AND REDUCES UP TO 99.99%
Aesthetic contaminants:
offensive tastes, odors, chlorine, silt,
sand, and sediment
Chemical contaminants:
industrial VOC’s (Volatile Organic
Compounds), PCB’s, THM’s
(Trihalomethanes), detergents,
Agricultural SOC’s (Synthetic Organic
Compounds), pesticides, DDT
Dissolved solid contaminants:
aluminum, arsenic, asbestos,
cadmium, chromium 6, copper,
fluoride, lead, mercury
Radiological contaminants:
Radon 222
90- DAY GUARANTEE
Manufacturer warrants the portable
water
filtration system to the consumer
for the
period of 90 days from the date
of
purchase, when used in accordance
with
manufacturer’s instructions.
THIS PRODUCT IS DESIGNED FOR
WATER
FILTRATION ONLY.
If there is any defect with the product,
return the unit (postage paid) to the
distributor with a valid purchase
receipt.
This guarantee does not cover
improper
use, maintenance, or
premature clogging
by overly turbid
water. This warranty
gives the consumer
specific rights.
The manufacturer shall under no
circumstances be liable for any special,
indirect, or consequential damages due
to misuse of goods.
The manufacturer makes no warranty of
fitness or merchant-ability. The
manufacturer makes no other
warranty
verbal or written, expressed or
implied,
except as specifically set forth
therein.