54 Piece Number
Marking Kit
For marking serial numbers, dates and
part codes on components
pryortechnology.com
https://www.pryortechnology.com | Tel: (804) 4966669 | sales@pryortechnology.com
1
Pryor's 54 Piece Number Marking Kit offers an easy
and affordable way to apply dates, serial numbers,
part numbers or codes to components and products.
The kit contains all the elements required to
permanently indent by hand and hammer on a range
of materials including metal and plastic up to a
maximum hardness of 37 Rockwell C
Sharp Faced engraving style to produce clear positive
impressions
Set Comprises
4 Sets of 0-9
1 off each character B N P S
2 off Oblique (/)
1 off Hyphen (-)
1 off Full Stop (.)
4 Spacer pieces for non-
marking positions
Single row Hand Holder
Allen wrench (hex key)
Supplied in compact plastic
case for easy storage.
54 Piece Number
Marking Kit
Latest addition to the Imperial
Interchangeable Type range
https://www.pryortechnology.com | Tel: (804) 4966669 | sales@pryortechnology.com
2
54 Piece Number
Marking Kit
Latest addition to the Imperial
Interchangeable Type range
FEATURES
APPLICATIONS
•
Produced from the best steel grades for long life
• Precision ground blanks to give clear marks of consistent depth
• Sharp Faced character style with uniform depth of engraving to
give a quality mark
• Hardened and tempered to precise limits to ensure consistency,
durability and safety in use
• Nickel plated finish to resist rust and offer a good quality
appearance
•
Apply Dates
• Serial Numbers
• Part Numbers
• Product Codes
https://www.pryortechnology.com | Tel: (804) 4966669 | sales@pryortechnology.com
3
TECHNICAL DATA 54 Piece Number Marking Kit
Character Height
Single Row Holder Capacity
- number of pieces
Maximum length of
marked inscription
Stock Code
mm
inch
1.50mm 1/16" 12 25/32” (20mm) TINMK015
3.00mm 1/8" 9 1 3/16” (29mm) TINMK030
4.00mm 5/32" 9 1 37/64” (39mm) TINMK040
5.00mm 3/16" 8 1 37/64” (39mm) TINMK050
Character Height
Blank Length
Blank Height
Blank Width
mm
inch
mm
inch
mm
inch
mm
inch
1.50mm 1/16" 22.20mm 7/8" 6.40mm 1/4" 1.60mm 1/16"
3.00mm 1/8" 22.20mm 7/8" 6.40mm 1/4" 3.20mm 1/8"
4.00mm 5/32" 22.20mm 7/8" 6.40mm 1/4" 4.00mm 5/32"
5.00mm 3/16" 22.20mm 7/8" 6.40mm 1/4" 4.80mm 3/16"
PRODUCT INFORMATION ACCESSORY: GRIP0004
•
Making a mark with Steel Type saves time - simply build an
inscription into the slot in the Holder and in just one stroke, a series
of letters and figures can be indented with uniform legibility
• Hand Holders designed to provide accurate Type location and positive
locking. Simply adjust the grub screw with the Allen Key provided for
quick inscription change
• Safety Grip available as an accessory to work with Hand Holders
allows the user to make a controlled and confident strike by keeping
the fingers at a safe distance, reducing the risk of injury and assisting
in making a good quality mark
• Steel Type with uniformity of blank size, character position and depth
from one piece to another allows a straight, consistent quality mark
to be made on a range of materials including metal and plastic up to
a maximum hardness of 37 Rockwell C
• Additional & replacement characters plus individual sets of A-Z, 0-9
are all available to compliment this marking set.
Safety note: As with all striking tools, we recommend the use of appropriate safety protection. Safety glasses
and gloves should we worn at all times
Safety Grip GRIP0004 is
designed to enable a hard
blow to be struck by hand and
hammer whilst reducing the
risk of injuring the hands of the
users.
/
