Model # BARK-940P-P6
6/27/2012 Page 1 of 11
1675 Locust Street
Red Bud, IL 62278
Phone: 618-282-8200
Fax: 618-282-8202
WARRANTY & TERMS
WARRANTY: 5 Year Limited Warranty on Thermoplastic/Canine coated elements.
Bark Park guarantees all items for one full year to be free of defects in workmanship or materials when installed and maintained properly. We agree
to repair or replace, any items determined to be defective. Items specifically not covered by this warranty include vandalism, man made or natural
disasters, lack of maintenance, normal weathering or wear and tear due to public abuse.
ORDER INFORMATION:
When ordering please include a brief description of all items. Be sure to include colors for Canine coated and powder
coated surfaces. To assist Bark Park in entering orders properly, please fax or mail orders on your standard purchase order form. Quotes are good
for 30 days.
GSA CONTRACT:
GSA pricing is available on several items. Contact our sales department for specific information.
SPECIFICATIONS:
Due to Bark Park’s continuous product improvement, we reserve the right to change specifications when necessary without
notice.
PRICING:
Bark Park strives to keep pricing as low as possible. However, should we encounter increases in our costs that are simply too large to
absorb, we reserve the right to increase prices without notice.
TERMS:
Approved accounts net 30 days. Initial order requires payment in full before shipment. A finance charge of 1-1/2% per month will be
applied to all delinquent accounts. We accept VISA, MASTERCARD and AMERICAN EXPRESS.
FREIGHT CHARGES:
Terms of sale are F.O.B. factory. Bark Park will prepay and add the freight to the invoice if requested to do so. All weights
are approximate.
Damages or loss in transit is the responsibility of the carrier, whether visible or concealed. It is the responsibility of the recipient to assure that the
order is received complete. Before signing the delivery receipt, inspect the shipment immediately and completely. Note any damages or shortages
on the bill of lading. Damage reports must be filed within 10 days. Bark Park is NOT responsible for damages or loss in transit. Title to all goods
passes to the customer at the time of shipment. Bark Park will assist in filing claims if the freight arrangements were made by Bark Park at your
request.
CANCELLATIONS AND RETURNS:
Cancellations are only accepted with approval of Bark Park. No merchandise shall be returned without a
Return Goods Authorization number which is issued by customer service. Any authorized merchandise must be carefully packed and received in
saleable condition. A restocking charge of up to 25% will be applied to all returned goods when the error is not the fault of Bark Park. All returns
must be shipped freight prepaid.
6/27/2012 Page 2 of 11
Owners and installers please note these safety warnings and make use of this checklist on a regular basis.
•
Follow installation instructions when erecting equipment.
•
Ground surfaces around equipment should be restored as needed. Concrete footings should never be exposed. Surface depth
•
should comply with ASTM and CPSC specifications.
Check for and repair damage caused by wear or vandalism, a major factor in injury causing situations.
•
All protruding bolts should be covered or cut off and finished smooth. Sharp edges on pipes should be capped or removed. Check
•
for bent, broken, or severly worn pipe, and replace.
All equipment should be free of rust and repainted whenever necessary to deter rusting.
•
We provide our customers with layout sheets and installation instructions. Please keep on file the specifications sheet that contains
•
the listing of every part used.
Never add components not intended for use with this product.
•
Regular maintenance is necessary in this and all park and recreational equipment to insure the safety of the user.
•
Note: Proper maintenance of equipment requires regular tightening of all bolts, nuts, and setscrews.
•
Note: Regular checking of all parts, castings, etc. should be made. If a part is broken or worn, it shoud be replaced immediatly.
•
Check to be sure all fittings are tight and that bars and pipes do not move.
•
Replace all worn S-hooks. S-hooks must be completely closed. Failure to close S-hooks can result in serious injury to the user.
•
NEVER reuse S-hooks.
Test for free movement of swing hanger and other moving attached parts.
•
Check for worn chains and replace them.
•
A soft resilient surface should be placed under all swings extending at least twice the height of the top rail both front and back.
•
SAFETY WARNINGS & EQUIPMENT INSPECTION
6/27/2012 Page 3 of 11
5/16" x 1"
Machine Bolt
5/16" Washer
5/16" Kep Nut
800-45-ULTRA
www.ultraplay.com
HARDWARE
Bark Park
6/27/2012 Page 4 of 11
800-45-ULTRA
www.ultraplay.com
1/2" Wrench
1/2" Socket Wrench
Tape Measure
Level
TOOLS REQUIRED
Bark Park
6/27/2012 Page 5 of 11
800-45-ULTRA
www.ultraplay.com
BARK PARK PRODUCT SPECIFICATIONS
Bark Park
Seats & Back: 11 gauge die formed angle frame 1”x1-7/8” with 3” radius corners. Seat and back plates are fabricated from a 12ga
plate. Holes are precision punched at 5/8” diameter. 7 gauge x 1-1/2” flat bar center support and mounting bracket understructure.
Electrically MIG welded.
Coating: Oven fused functionalized polyethylene copolymer-based thermoplastic. Fluidized bed coating application with superior
mechanical performance, impact resistance and UV-stability.
Frame: 2-3/8” O.D. x 12 gauge pre-galvanized structural steel tubing. Seat/back support is bent over a mandrel through the bend radius
producing a wrinkle free bend. Tube ends are pre-galvanized steel capped. Seat mounting points are 7 gauge x 1-1/2” die stamped
steel flat bar. Cross braces are 1.029 O.D. x 15 gauge pre-galvanized structural steel tubing. All electrically MIG welded.
Frame Coating: Electrostatic powder coated application oven cured.
Hardware: All stainless steel hardware fasteners.
Dimensions: 6’ bench portable with back. Seats and back are 12” wide x 72” long. Seat height is 18”, seat back height is 35”. Total
depth of seat with back is 22-1/4”.
BARK-940P-P6
6/27/2012 Page 6 of 11
8
6
10
4
5
7
9
3
2
1
ITEM NO.
PartNo
DESCRIPTION
QTY
1
P-V940P
940P Vinyl Leg
2
2
T-P72-S
6' Punched Seat
1
3
T-01-08-0048
6' Bark Park Seat
1
4
33-05-0029
5/16" x 1" Machine Bolt (SS)
10
5
33-02-0007
5/16" Flat Washer (SS)
20
6
33-02-0008
3/8" Flat Washer (SS)
2
7
33-03-0012
5/16" Kep Nut (SS)
10
8
33-03-0013
3/8" Kep Nut (SS)
2
9
P-01-04-0129
26 3/4" Brace
2
10
33-06-0058
3/8" x 3" Carriage Bolt (SS)
2
800-45-ULTRA
COMPONENTS
Bark Park
www.barkparkproducts.com
6/27/2012 Page 7 of 11
4
5
7
2
1
Attach the seat plank to the legs as shown using specified hardware. Then attach
the bracing to the underneath of the seat and the front of the legs as shown.
ITEM NO.
PART NUMBER
DESCRIPTION
STEP 1-P/QTY.
1
940p Vinyl
940P Vinyl Leg
2
2
seat_asem
6' Punched Seat
1
3
seat_asem-barkpark
6' Bark Park Seat
1
4
HBOLT 0.3125-18x1x1-N
5/16" x 1" Machine Bolt (SS)
10
5
5-16 SS
5/16" Flat Washer (SS)
20
6
3-8 SS
3/8" Flat Washer (SS)
2
7
5-16 kep nut (ss)
5/16" Kep Nut (SS)
9
8
3-8 kep nut (ss)
3/8" Kep Nut (SS)
3
9
26 3-4
26 3/4" Brace
2
10
Carriage_Bolt
3/8" x 3" Carriage Bolt (SS)
2
800-45-ULTRA
STEP 1
Bark Park
www.barkparkproducts.com
6/27/2012 Page 8 of 11
3
Attach the back plank the same way as the seat using specified hardware.
ITEM NO.
PART NUMBER
DESCRIPTION
STEP 2-P/QTY.
1
940p Vinyl
940P Vinyl Leg
2
2
seat_asem
6' Punched Seat
1
3
seat_asem-barkpark
6' Bark Park Seat
1
4
HBOLT 0.3125-18x1x1-N
5/16" x 1" Machine Bolt (SS)
10
5
5-16 SS
5/16" Flat Washer (SS)
20
6
3-8 SS
3/8" Flat Washer (SS)
2
7
5-16 kep nut (ss)
5/16" Kep Nut (SS)
9
8
3-8 kep nut (ss)
3/8" Kep Nut (SS)
3
9
26 3-4
26 3/4" Brace
2
10
Carriage_Bolt
3/8" x 3" Carriage Bolt (SS)
2
800-45-ULTRA
STEP 2
Bark Park
www.barkparkproducts.com
6/27/2012 Page 9 of 11
9
10
6
8
Attach the 26-3/4" Braces to the seat and legs as shown using specified hardware.
ITEM NO.
PART NUMBER
DESCRIPTION
STEP 2-P/QTY.
1
940p Vinyl
940P Vinyl Leg
2
2
seat_asem
6' Punched Seat
1
3
seat_asem-barkpark
6' Bark Park Seat
1
4
HBOLT 0.3125-18x1x1-N
5/16" x 1" Machine Bolt (SS)
10
5
5-16 SS
5/16" Flat Washer (SS)
20
6
3-8 SS
3/8" Flat Washer (SS)
2
7
5-16 kep nut (ss)
5/16" Kep Nut (SS)
9
8
3-8 kep nut (ss)
3/8" Kep Nut (SS)
3
9
26 3-4
26 3/4" Brace
2
10
Carriage_Bolt
3/8" x 3" Carriage Bolt (SS)
2
800-45-ULTRA
STEP 3
Bark Park
www.barkparkproducts.com
6/27/2012 Page 10 of 11
18 1/8"
35 1/8"
12"
22 3/16"
72"
800-45-ULTRA
Bark Park
OVERALL DIMENSIONS
www.barkparkproducts.com
6/27/2012 Page 11 of 11
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
Ultra Play PBARK940PP6BLU Installation guide
- Type
- Installation guide
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Ultra Play 5807SM Installation guide
-
-
-
Unbranded PL-32 Operating instructions
-
-
-
-
-
-
Other documents
-
Anova RCPWF6 Assembly Instructions
-
Garmin Delta Smart™ Dog Training System Owner's manual
-
Garmin BarkLimiter™ 2 Owner's manual
-
-
Garmin BarkLimiter User manual
-
Petsafe PBC00-13974 Owner's manual
-
-
Monarch Adventure Playsets 1-AP013 Owner's Manual And Assembly Instructions
-
X-Stand X-SCAPE Assembly And Safe Use Manual
-
