Home Accents Holiday TY219-1714-1 Installation guide

Home Accents Holiday
Brand
Home Accents Holiday
Model
TY219-1714-1
Type
Installation guide

Home Accents Holiday TY219-1714-1

The Home Accents Holiday TY219-1714-1 is a 6-foot tall, lighted Nativity scene with 1004 LED lights. It is made of durable materials and is designed for indoor or outdoor use. The Nativity scene comes with a variety of features, including:

  • 1004 LED lights: The Nativity scene is illuminated by 1004 LED lights, which provide a bright and festive glow.
  • Durable materials: The Nativity scene is made of durable materials, such as metal and plastic, which makes it resistant to weather damage.
  • Indoor or outdoor use: The Nativity scene can be used indoors or outdoors, making it a versatile decoration for any home.

Home Accents Holiday TY219-1714-1

The Home Accents Holiday TY219-1714-1 is a 6-foot tall, lighted Nativity scene with 1004 LED lights. It is made of durable materials and is designed for indoor or outdoor use. The Nativity scene comes with a variety of features, including:

  • 1004 LED lights: The Nativity scene is illuminated by 1004 LED lights, which provide a bright and festive glow.
  • Durable materials: The Nativity scene is made of durable materials, such as metal and plastic, which makes it resistant to weather damage.
  • Indoor or outdoor use: The Nativity scene can be used indoors or outdoors, making it a versatile decoration for any home.
SKU # 1004 391 989
OMS THD SKU # 1004 254 785
Model # TY219-1714-1
Thank you!
We appreciate the trust and confidence you have placed in Home Accents
through the purchase of this 6ft Toasty Tinsel LED Lighted Nativity Scene.
We strive to continually create quality products designed to enhance your
home. Visit us online to see our full line of products available for your home
improvement needs. Thank you for choosing Home Accents!
1-877-527-0313
HOMEACCENTSHOLIDAY.COM
ASSEMBLY INSTRUCTIONS
6ft Toasty Tinsel LED Lighted Nativity Scene
USE AND CARE GUIDE
PLANNING ASSEMBLY
Carefully remove all the parts from the box and place them on the ground. Many
parts are connected by the lighting string that runs throughout the item. Take special
care not to pull, cut or damage the lighting string. Read the entire manual prior to
assembly and identify all the parts included in the package against the parts list. It is
recommended to assemble parts of the product while laying flat on the ground
versus standing the item up to assemble the parts. If any parts are missing or
damaged do not attempt assembly but contact our customer service center.
*Assembly of this product may require more than one person.
Pre-Operation
CAUTION: Grasp the plug to insert or remove from the power source.
Do not unplug by pulling on cord.
CAUTION: The lighting string on this product is rated at 16.8 Watts (0.14
Amps). Do not overload. Do not connect to another lighting string, decorative outfit or
other electrical products. Before you use or re-use this product inspect it carefully.
Discard or return to place of purchase with purchase receipt if the product has cuts,
damage, frayed wire insulation on cords, cracks in the socket enclosures, loose
connections, exposed copper wire or other obvious damage.
Care and Cleaning
a. Carefully remove the product from wherever it is placed. This helps to avoid any
undue strain or stress on the product connections and wires. If the product is placed
somewhere other than the ground it should be well secured and flat.
b. Carefully disassemble the unit taking caution not to cut any electrical wires.
c. Wipe the unit with a damp cloth and allow the unit to dry before storing.
d. Store the product neatly in a cool, dry location protected from sunlight.
Trouble Shooting
a. Ensure that the floor or surface that the item sits on is flat and level
b. Be sure to plug the item correctly to a wall outlet or a UL Listed Power Cord
c. Ensure all parts are assembled properly per the Instruction Manual
d. If the item does not light check for loose or broken bulbs and connections
e. Do not plug into other electrical items
f. If the item has multiple Light String Cords be sure to plug in all cords
g. Check for Broken or Burned Out Fuse In Plug
Guarantee
What is Covered
The product is intended for residential seasonal use for 90 days per year. This
product is covered by a 90 days limited guarantee due to defects in material and
workmanship. Return the product with purchase receipts to the location of purchase
for refund within 90 days of purchase.
What is Not Covered
This warranty does not cover commercial use, normal wear and tear, products not
used in accordance with directions provided on or with the product, burn out of bulbs
or LEDS, batteries, products that have been subjected to unauthorized repair and/or
modification and damage caused by shipping and improper handling, alterations,
misuse, in store display models or accidents. Questions, problems, missing parts?
Before returning to the store, call Home Accents Holiday Customer Service 8 a.m.-6
p.m., EST, Monday-Friday
Diagram of Parts
Download the free BILT app on any mobile
device and access easy 3D interactive
instructions to assemble this product.
Please go to Homedepot.com and search for
SKU number or model number listed on the
top left corner of this page. INSTALLATION
VIDEO (located next to product image).
Parts List
Locater Name Qty.
A Star 1
B Top of Stable 2
C Left & Right Sides of Stable 2
D Top of Stable Stabilizing Bar 1
E Base Stand 2
F Support Bracket 5
G Wiseman A - Body 1
H Wiseman A Right Arm 1
I Mary's Body 1
J Mary's Right Arm 1
K Joseph's Right Arm 1
L Joseph's Body 1
M Joseph's Left Arm 1
N Wiseman-B - Body 1
O Wiseman B Left Arm 1
P Wiseman -C - Body 1
Q Wiseman C Left Arm 1
R Cane 1
Hardware List
Locater Name Qty.
S Spare Bulb 8
T Spare Fuse 8
U Plastic Tie 20
V Cotter Pin 2
W Ground Stake 16
J
A
B
C
D
E
C
F
G
H
N
I
Q
O
L
K
P
M
R
T
S
U
V
W
J
A
SSEMBLY
1 Assembling the Support Bracket of Wiseman A
Turn Wiseman A Body (G) around to face the backside; The Support
Bracket (F) comes with a lower metal swivel bar and an upper metal
bar attached to stabilize the Wiseman (A) - Body (G). Insert the hooked
end of the upper metal bar into the connecting hole on the upper back
section then secure with the Cotter Pin (V). Hook the lower metal swivel
bar into the connecting hole on the lower back section.
2 Attaching the Right Arm to Wiseman A
Insert the connecting rods on Wiseman A Right Arm (H) into the
connecting holes on the right side of Wiseman A Body (G).
3 Assembling the Support Bracket to Mary's Body
Turn Mary Body (I) around to face the backside; The Support Bracket
(F) comes with a lower metal swivel bar and an upper metal bar attached
to stabilize Mary Body. Insert the hooked end of the upper metal bar into
the connecting hole on the back of the head then secure with the Cotter
Pin (V). Hook the lower metal swivel bar into the connecting hole on the
lower back section.
4 Assembling the Right Arm to Mary's Body
Insert the connecting rods on Mary's Right Arm (J) into the connecting holes
on the right side of Mary's Body (I).
5 Assembling the Support Bracket to Joseph's Body
Turn Joseph Body (L) around to face the backside; The Support Bracket
(F) comes with a lower metal swivel bar and an upper metal bar attached
to stabilize Joseph Body (L). Insert the hooked end of the upper metal bar
into the connecting hole on the upper back section then secure with the
Cotter Pin (V). Hook the lower metal swivel bar into the connecting hole
on the lower back section.
6 Assembling the Arms of Joseph
Insert the connecting rods on Joseph's Right and Left Arms (K,M) into the
connecting holes on the sides of Joseph's upper body (L). Note: The Right
Arm is holding the lantern.
V
G
F
H
G
F
V
I
J
I
F
L
V
L
K
M
A
SSEMBLY
7 Attaching the Cane to Joseph's Body
Place the Cane (R) in the loop on the inside of Joseph's Left Arm (M).
8 Assembling the Support Bracket to Wiseman B
Turn Wiseman B Body (N) around to face the backside; The Support
Bracket (F) comes with a lower metal swivel bar and an upper metal bar
attached to stabilize Wiseman B -Body (N). Insert the hooked end of the
upper metal bar into the connecting hole on the back of the head section
then secure with the Cotter Pin (V). Hook the lower metal swivel bar into
the connecting hole on the lower back section.
9 Assembling the Left Arm on Wiseman B- Body
Insert the connecting rods on Wiseman B Left Arm (O) into the matching
holes of the left side of Wiseman's B upper body (N).
10 Attaching the Support Bracket to Wiseman C Body
Turn Wiseman C Body (P) around to face the backside; The Support
Bracket (F) comes with a lower metal swivel bar and an upper metal bar
attached to stabilize Wiseman A -Body (P). Insert the hooked end of the
upper metal bar into the connecting hole on the upper back section then
secure with the Cotter Pin (V). Hook the lower metal swivel bar into the
connecting hole on the lower back section.
11 Attaching the Left Arm to Wiseman C Body
Insert the connecting rods on Wiseman C Left Arm (Q) into the
connecting holes on the left side of Wiseman C Body (P).
12 Assembling the Top and Sides of Stable
Insert the connecting rods on one half of the Top Stable (B) into the
connecting holes on the other half. Insert the connecting rods on the
Top of Stable (B) into the connecting holes of the top of the Sides of
Stable (C) and secure them together at the connecting loops with
Plastic Ties (U).
M
R
N
V
F
O
N
V
P
F
P
Q
C
B
U
A
SSEMBLY
13 Assembling the Top of Stable Stabilizing Bar
Insert the connecting rods on the Top of Stable Stabilizing Bar (D)
into the connecting holes on the back side of the Top of Stable (B).
14 Assembling the Base Stands to the Stable
Insert the hooked end of the metal stabilizing bars from Base Stands
(E) into the connecting holes on the back side of the Stable (C) then
secure with the Cotter Pins (V). Insert the connecting rods at the bottom
of Left & Right Columns of Stables (C) into the connecting holes on the
Base Stands (E).
15 Assembling the Star
Insert the connecting rods on the back of the Star (A) into the
connecting holes on the front Top of Stable (B).
16 Securing the Nativity Scene to the Ground
Insert the Ground Stakes (W) over the metal frames at the base of each
character and stable base stands and support brackets then into the
ground firmly.
B
D
E
C
V
E
C
V
B
A
W
W
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Home Accents Holiday TY219-1714-1 Installation guide

Home Accents Holiday
Brand
Home Accents Holiday
Model
TY219-1714-1
Type
Installation guide

Home Accents Holiday TY219-1714-1

The Home Accents Holiday TY219-1714-1 is a 6-foot tall, lighted Nativity scene with 1004 LED lights. It is made of durable materials and is designed for indoor or outdoor use. The Nativity scene comes with a variety of features, including:

  • 1004 LED lights: The Nativity scene is illuminated by 1004 LED lights, which provide a bright and festive glow.
  • Durable materials: The Nativity scene is made of durable materials, such as metal and plastic, which makes it resistant to weather damage.
  • Indoor or outdoor use: The Nativity scene can be used indoors or outdoors, making it a versatile decoration for any home.
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents