Golden Lighting 1323-1W EBB Operating instructions

Golden Lighting
Brand
Golden Lighting
Model
1323-1W EBB
Type
Operating instructions

This manual is also suitable for

Golden Lighting 1323-1W EBB is a lighting fixture compatible with incandescent or LED light bulbs with a maximum wattage of 60W. It is designed to be mounted on a wall and comes with all the necessary hardware for easy installation. The fixture features a stylish design with a backplate and brackets made of metal and a candle sleeve made of glass. It is suitable for use in both residential and commercial settings and can be used to provide ambient lighting or task lighting. The fixture is easy to clean and maintain, and it comes with a one-year warranty.

Golden Lighting 1323-1W EBB is a lighting fixture compatible with incandescent or LED light bulbs with a maximum wattage of 60W. It is designed to be mounted on a wall and comes with all the necessary hardware for easy installation. The fixture features a stylish design with a backplate and brackets made of metal and a candle sleeve made of glass. It is suitable for use in both residential and commercial settings and can be used to provide ambient lighting or task lighting. The fixture is easy to clean and maintain, and it comes with a one-year warranty.

Assembly Instructions: 1323-1W (Ella)
IMPORTANT:
• ALL INSTALLATION WORK SHOULD BE DONE BY ACCREDITED PROFESSIONAL.
• SHUT OFF POWER SUPPLY AT FUSE OR CIRCUIT BREAKER!
• USE ONLY THE SPECIFIED BULBS. DO NOT EXCEED THE MAXIMUM WATTAGE!
PREPARING FOR INSTALLATION
Remove all of the contents from the carton. See the important
notes above. Shut off the power at the circuit breaker and
completelyremovetheoldxturefromthewall,includingthe
oldmountingstrap.
Mountingstrap(B)containsseveralpairsofthreadedholes.
Findthepairofholesthatmatchesthespacingoftheholeson
thejunctionboxandyourxture’sbackplate.Note:Inorderfor
thexturetohangstraight,brackets(C)shouldbecenteredat
thetopandbottom.Pullthehousewiresthroughthecenterof
mountingstrap(B).Placemountingstrap(B)overthejunction
boxsothatmountingscrews(A)arehorizontal,andinalignment
withtheholelocationsonthexture’sbackplate(F).Secure
mountingstrap(B)tothejunctionboxwithmountingscrews(A)
andascrewdriver.Tightenthescrewssecurely.
CONNECTING THE WIRES
Attachthexture’swirestothepowersupplywiresfromthe
junctionbox.Connectblack(hot)tosmooth/black/transparent
(L);white(neutral)toribbed/white/transparent(N);andground
(green)tobarecopper/green/transparentwithgreeninterior.
Twisttheendsofthewirepairstogether,andthentwistona
wire connector. Make sure all twists are in the same direction.
Ifthereisnogroundwire(greenorcopper)fromthejunction
box,locategroundscrew(E)onthemountingbracket/mounting
strapandwrapthexture’sgroundwirearoundthegreen
groundscrew(E).Useascrewdrivertosecuregroundscrew(E)
ontothemountingbracket/mountingstrap.Tuckallwiresneatly
intothejunctionbox.
FINISHING THE INSTALLATION
Placebackplate(F)overbrackets(C)ofmountingstrap(B)and
line up the holes on the top and bottom of the backplate with
the holes in brackets (C). Insert screws (D) into the holes at the
topandbottomofbackplate(F)anduseascrewdrivertotighten
the screws securely.
Slide candle sleeve (J) over socket (I).
Installlightbulb(K)(notprovided)inaccordancewiththe
xture’sspecications.
Your installation is now complete. Turn on the power and test
thexture.
CLEANING TIPS
Treat the xture gently! Regular cleaning will reduce the need for deep cleaning. For regular cleaning, turn off the light and wipe down
the xture with a clean lint-free cotton or microber cloth. Dry with a lint-free or microber cloth.
For Customer Service, contact
the place of purchase.
E
A
B
D
C
F
G
H
I
J
K
Smooth / Black /
Transparent (L)
Black (Hot)
Ribbed / White /
Transparent (N)
Bare Copper / Transparent with
Green Interior / Green
White (Neutral)
Green
(Ground)
AA is a double sided crystal,
50mm
Part: PT-CRYSTAL-1323-AA
AS is a single sided crystal,
50mm
Part: PT-CRYSTAL-1323-AS
A - crystal drop
B - crystal drop
C - crystal drop
BB is a double sided crystal,
76mm
Part: PT-CRYSTAL-1323-BB
BS is a single sided crystal,
76mm
Part: PT-CRYSTAL-1323-BS
CC is a double sided crystal,
89mm
Part: PT-CRYSTAL-1323-CC
D5/D6 uses 5/6 pieces
of replacement part
PT-CRYSTAL-1323-D12
A1
A2
A4
A6
B2
BB1
CC5
D - crystal drop
A1, A2, A3, and A4
These crystal drops use
1/2/4/6 pieces of
PT-CRYSTAL-1323-D14
plus 1 piece of
PT-CRYSTAL-1323-AS
B2 uses 2 pieces of
PT-CRYSTAL-1323-D14
plus 1 piece of
PT-CRYSTAL-1323-BS
BB1 uses 1 piece of
PT-CRYSTAL-1323-D14 plus
1 piece of PT-CRYSTAL-
1323-BS
CC5 uses 5 pieces of part
PT-CRYSTAL-1323-D14 plus
1 piece of PT-CRYSTAL-
1323-CC
1323 Crystal Instructions
  • Page 1 1
  • Page 2 2

Golden Lighting 1323-1W EBB Operating instructions

Golden Lighting
Brand
Golden Lighting
Model
1323-1W EBB
Type
Operating instructions
This manual is also suitable for

Golden Lighting 1323-1W EBB is a lighting fixture compatible with incandescent or LED light bulbs with a maximum wattage of 60W. It is designed to be mounted on a wall and comes with all the necessary hardware for easy installation. The fixture features a stylish design with a backplate and brackets made of metal and a candle sleeve made of glass. It is suitable for use in both residential and commercial settings and can be used to provide ambient lighting or task lighting. The fixture is easy to clean and maintain, and it comes with a one-year warranty.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents