MUSTEE 25BT Dimensions Guide

Type
Dimensions Guide

This manual is also suitable for

3
1
/
2
"
3
1
/
8
"
9
1
/
4
"
9
1
/
4
"
3
1
/
4
"
3
1
/
8
"
12
3
/
4
"
1
1
/
2
"
15
1
/
2
"
1
/
2
"
9
/
16
"
DRAIN
DRAIN
CONNECTION
22"
11"
25"
25"
25 Vector
Multi-Task Sink
General: Furnish and install as shown on plans a Vector™
Multi-Task Sink (Model 25) as manufactured by E.L. Mustee &
Sons, Inc. Material composition shall be molded fiberglass, using
matched metal dies under heat and pressure. One-piece, seamless
construction with self-rimming edge and complete 1-1/2” drain
assembly. Shall meet ANSI Z 124-2011. Overall size 22” length x 25”
width x 12-3/4” depth, weight 16 lbs., Color: _______ (White, Biscuit,
Twilight, Prairie Drift).
Dimension Length Width Depth
Overall 22" 25" 12.75"
Inside (top) 15.5" 22" -
Inside (shelf) 15.5" 3.125" -
Cutout 21" 24" -
Model No. Color UPC
25 White 6 71031 00417 8
25BT Biscuit 6 71031 00418 5
25PD Prairie Drift 6 71031 00427 7
25TW Twilight 6 71031 00426 0
E.L. Mustee & Sons, Inc. 5431 West 164th Street • Brook Park, OH 44142 • Phone: 216.267.3100 • Fax: 216.267.9997
E-mail: inf[email protected]. Web: www.mustee.com • Proudly made in the USA
Notice: Our continuous commitment to product improvement may result in changes to product specifications without notice.
Patents pending. Made and Printed in U.S.A.
Code Accepted
Mustee utility sinks meet or exceed performance requirements:
International Association of Plumbing and Mechanical Officials (IAPMO)
®
Listed
Warnock Hersey
®
(Canada) Listed—CSA #B45.0 and #B45.5
American National Standards Institute (ANSI)—Specification Z 124-2011
Design features:
Molded using matched metal molds with premium fiberglass blended
with special resins for extra strength and durability
Semi-gloss, scratch & stain-resistant
Self-rimming design
Recessed, self draining shelf, 3.25” below rim, 3.125” wide and 15.5”
long...ideal for soap dispensers, spray bottles, sponges, etc.
Includes drain assembly with stopper for 1-1/2” P-Trap
One piece molded, with matched metal molds
Accommodates single or dual-handle faucets with 4” or 8” centers,
soap and instant-hot dispensers, and more
Faucet hole indicators on back ledge simplify mounting installation
Specifications
  • Page 1 1

MUSTEE 25BT Dimensions Guide

Type
Dimensions Guide
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI