L155
© 2012 AS America Inc.
Revised 6/11
HERITAGE
TWO-HANDLE WALL-MOUNT SINK FAUCET
WITH BRASS SPOUT
GENERAL DESCRIPTION:
Durable brass construction throughout. Amarilis 1/4 turn
washerless ceramic disc valve cartridges. One-half inch NPT
female inlets with brass coupling nuts. 2.2gpm/8.3L/min.
maximum flow rate.
PRODUCT FEATURES:
Ceramic Disc Valve Cartridges: Assures a lifetime of
drip-free performance.
Solid Brass Construction: Durable - Excellent in high
use applications. Ideal for prolonged contact with water.
Low Lead: Meets NSF Standard 61/Section 9 & Prop 65
lead requirements.
MODEL NUMBER:
7295.152 Wall-Mount Sink Faucet
5-5/8" cast swivel spout. Brass Lever Handles. Soap dish.
7298.152 Wall-Mount Sink Faucet
8" tubular swivel spout. Brass Lever Handles.
Less soap dish.
7292.152 Wall-Mount Sink Faucet
12" tubular swivel spout. Brass Lever Handles.
Less soap dish.
SUGGESTED SPECIFICATION:
Wall-mount sink faucet shall be cast brass construction with all brass coupling nuts. Shall also feature 1/4 turn washerless
ceramic disc valve cartridges. Fitting shall be American Standard Model # ______.____.___.
7295.152
Product
Number
Description
Wall-mount sink faucet. 5-5/8" cast swivel spout. Brass Lever Handles. Soap dish.
Finish
7298.152
Wall-mount sink faucet. 8" tubular swivel spout. Brass Lever Handles. Less soap dish.
7292.152
Wall-mount sink faucet. 12" tubular swivel spout. Brass Lever Handles. Less soap dish.
Polished
Chrome
002
33mm
(1-5/16")
FINISHED
WALL
203mm
(8")
7295.152
143mm
(5-5/8")
15˚
70mm
(2-3/4")
1/2" NPT
(FEMALE)
87mm
(3-7/16")
71mm
(2-13/16")
203mm
(8")
87mm
(3-7/16")
71mm
(2-13/16")
FINISHED
WALL
7298.152
200mm
(7-7/8")
7292.152
305mm
(12")
70mm
(2-3/4")
7292.152
184mm
(7-1/4")
7298.152
178mm
(7")
7292.152
116mm
(4-9/16")
7298.152
111mm
(4-3/8")
1/2" NPT
(FEMALE)
FLOW RATE*
GALLONS PER MINUTE
INLET PRESSURE (PSI)
*Flow rates shown are for mixed hot and cold.
0.0
0.5
1.0
1.5
2.0
2.5
3.0
10080604020
CODES AND STANDARDS
These products meet or exceed the following
codes and standards:
ANSI A117.1
ASME A112.18.1
CSA B 125
NSF 61/Section 9
MEET
AND ANSI A117.1 REQUIREMENTS FOR ACCESSIBLE AND