CAB Accessories label printers are versatile and efficient devices designed to meet the diverse labeling needs of various industries. Their compact size and user-friendly design make them ideal for desktop use, while their advanced features and capabilities enable them to handle a wide range of labeling tasks with precision and accuracy. These printers excel in producing high-quality labels, tags, and receipts, making them suitable for applications in retail, healthcare, manufacturing, and logistics, among others.
CAB Accessories label printers are versatile and efficient devices designed to meet the diverse labeling needs of various industries. Their compact size and user-friendly design make them ideal for desktop use, while their advanced features and capabilities enable them to handle a wide range of labeling tasks with precision and accuracy. These printers excel in producing high-quality labels, tags, and receipts, making them suitable for applications in retail, healthcare, manufacturing, and logistics, among others.
Operator's Manual
Made in Germany
Cutter and
Perforation Cutter
EOS2 / EOS5
2 2Operator's Manual
Edition: 10/2018 - Part No. 9003328
Copyright
This documentation as well as translation hereof are property of cab Produkttechnik
GmbH & Co. KG.
The replication, conversion, duplication or divulgement of the whole manual or parts
of it for other intentions than its original intended purpose demand the previous
written authorization by cab.
Editor
Regarding questions or comments please contact cab Produkttechnik GmbH & Co.
KG.
Topicality
Due to the constant further development of our products discrepancies between
documentation and product can occur.
Please check www.cab.de for the latest update.
Terms and conditions
Deliveries and performances are effected under the General conditions of sale of
cab.
Germany
cab Produkttechnik
GmbH & Co KG
Karlsruhe
Phone +49 721 6626 0
www.cab.de
USA
cab Technology, Inc.
Chelmsford, MA
Phone +1 978 250 8321
www.cab.de/us
Taiwan
cab Technology Co., Ltd.
Taipeh
Phone +886 (02) 8227 3966
www.cab.de/tw
China
cab (Shanghai) Trading Co., Ltd.
Guangzhou
Phone +86 (020) 2831 7358
www.cab.de/cn
France
cab Technologies S.à.r.l.
Niedermodern
Phone +33 388 722501
www.cab.de/fr
Mexico
cab Technology, Inc.
Juárez
Phone +52 656 682 4301
www.cab.de/es
China
cab (Shanghai) Trading Co., Ltd.
Shanghai
Phone +86 (021) 6236 3161
www.cab.de/cn
South Africa
cab Technology (Pty) Ltd.
Randburg
Phone +27 11 886 3580
www.cab.de/za
3
1 Introduction .................................................................................... 4
1.1 Instructions ......................................................................................4
1.2 Intended Use ...................................................................................5
1.3 Safety Instructions ...........................................................................6
1.4 Environment .....................................................................................6
1.5 Technical Data .................................................................................7
2 Mounting .........................................................................................8
2.1 Removing the Tear-off Plate ............................................................8
2.2 Mounting the Cutter .........................................................................9
3 Operation ...................................................................................... 10
3.1 Loading Material ............................................................................10
3.2 Reference to the Programming ......................................................11
3.3 Standard Operation .......................................................................12
4 PrinterConguration ...................................................................13
5 Cleaning and Replacing the Blades ........................................... 15
6 Licenses .......................................................................................17
6.1 Reference to the EU Declaration of Conformity .............................17
6.2 FCC ...............................................................................................17
Table of Contents
4 41 Introduction
1.1 Instructions
Important information and instructions in this documentation are designated
as follows:
Danger!
Draws your attention to an exceptionally grave, impending danger
to your health or life.
!
Warning!
Indicates a hazardous situation that could lead to injuries or
material damage.
!
Attention!
Draws attention to possible dangers, material damage or loss of
quality.
i
Note!
Gives you tips. They make a working sequence easier or draw
attention to important working processes.
Environment!
Gives you tips on protecting the environment.
Handling instruction
Reference to section, position, illustration number or document.
Option (accessories, peripheral equipment, special ttings).
Time
Information in the display.
51 Introduction
1.2 Intended Use
• The device is intended exclusively as an option for the printers of the
EOS series for cutting and perforating suitable materials that have been
approved by the manufacturer. Any other use or use going beyond this
shall be regarded as improper use. The manufacturer/supplier shall not be
liable for damage resulting from unauthorized use; the user shall bear the
risk alone.
• Usage for the intended purpose also includes complying with the operating
manual, including the manufacturer‘s maintenance recommendations and
specications.
• The device is manufactured in accordance with the current technological
status and the recognized safety rules. However, danger to the life and
limb of the user or third parties and/or damage to the device and other
tangible assets can arise during use.
• The device may only be used for its intended purpose and if it is in perfect
working order, and it must be used with regard to safety and dangers as
stated in the operating manual.
i
Note!
All documentations can also currently be found in the Internet.
!
Warning!
This is a class A product. In a domestic environment this product
may cause radio interference in which case the user may be
required to take adequate measures.
6 61 Introduction
1.3 Safety Instructions
• Disconnect the printer from the electrical outlet before mounting or
removing the cutter.
• The cutter may only be operated when it is mounted on the printer.
• Risk of injury, particularly during maintenance, the cutter blades are sharp.
• Work going beyond this may only be performed by trained personnel or
service technicians.
• Unauthorized interference with electronic modules or their software can
cause malfunctions. Other unauthorized work on or modications to the
device can also endanger operational safety.
• Always have service work done in a qualied workshop, where the
personnel have the technical knowledge and tools required to do the
necessary work.
• Warning stickers must not be removed, as then you and other people
cannot be aware of dangers and may be injured.
1.4 Environment
Obsolete devices contain valuable recyclable materials that should be sent
for recycling.
Send to suitable collection points, separately from residual waste.
The modular construction of the printer enables it to be easily disas-
sembled into its component parts.
Send the parts for recycling.
Take the electronic circuit boards to public waste disposal centers or to
the distributor.
71 Introduction
1.5 Technical Data
Cutter and Perforation Cutter EOS2 EOS5
for printer type
EOS2 EOS5
Perforating
Web distance mm 2.5
Web width mm 0.8
Material
Width mm ≤ 45
Weight cardboard g/m² 60 - 240
Thickness mm 0.05 - 1.1
Cutting length mm ≥ 10
Cut frequency 1/min ≤ 200
Power Supply Cutter connector of the printer
!
Attention!
The minimum cut length is depending on the media, in particular its
adhesive characteristics.
Perform preliminary tests. Test the media too, if the media is
veryhard,veryexibleorverythin.
8 82 Mounting
2.1 Removing the Tear-off Plate
Before mounting the cutter the tear-off plate mounted on the printer must be
removed.
2
1
3
2
3
Figure 1 Removing the tear-off plate
Fold down the tear-off plate (1), pull the axles (2) of the tear-off plate out of
the holders (3) and remove the tear-off plate.
10 103 Operation
3.1 Loading Material
Fold down the cutter.
Insert labels for tear-off mode Operator's manual of the printer.
Place the media strip between the printhead and the drive roller, so that
the front edge of the strip reaches through the cutter.
21
Figure 3 Guiding the labels into the cutter
Guide the labels (2) into the slot (1) and fold up the cutter.
Insert ribbon Operator's manual of the printer.
113 Operation
3.2 Reference to the Programming
Insert labels for tear-off mode Operator's manual of the printer.
Place the media strip between the printhead and the drive roller, so that
the front edge of the strip reaches through the cutter.
Insert ribbon Operator's manual of the printer.
Activate the commands for perforation or cut-off in the software.
For direct programming use the following commands:
C p Perforation command
C Cut-off command
Both commands may be combined, but C p has a lower priority.
Programming Manual
Using the sequence :
C 3
C p
the material will be perforated two times and afterwards cut off.
Congure the cut parameters 4. Printer Conguration
i
Note!
The cut parameters are only accessible with cutter installed.
!
Attention!
In several label software solutions the perforation command C p
is not implemented. Perforating material via such a software is not
possible.
For direct programming use the following command :
O Cn n...Value between 0.0 and 10.0
i
Note!
If the label software has no setting for the perforation level,
i.e. O Cn is not implemented, the adjustment also may be done
using the printer setup 4.PrinterConguration.
12 123 Operation
3.3 Standard Operation
Switch on the printer.
The cutter performs a synchronization action.
i
Note!
To operate the cutter with continuous material in the printer menu
Setup -
>
Labels -
>
Label sensor the setting Continuous media has to be
selected. Otherwise no synchronization cut is carried out.
Press . For synchronization the media will be moved forward and
cut off.
That synchronization is not necessary when the printhead was not opened
between print jobs, even if the printer was powered off between print jobs.
Send a print job.
All labels in a print job will be printed without stopping and be perforated or
cut as chosen in the software : after each label, after a specic quantity of
labels, or at the end of a print job.
i
Note!
Between the print jobs a direct cut can be released by pressing
on the control panel.
13
i
Note!
The values of the setup are basic settings for the current printer/
cutter combination.
After changing the cutter or printer a re-adjustment may be
necessary.
Changes required for processing different print jobs should be
implemented by additional offsets available in the software.
The offset values from setup and software are added together for
execution.
Fordetailedinstructionsforconguration
CongurationManualoftheprinter.
Cut Parameters
Start menu.
Select Setup > Cutting.
Parameter Meaning Default
Cut position
Offset of the cut position relative to the rear
label edge.
The setting can also be adjusted by the
software.
The settings of conguration and software
are added together.
0.0 mm
Perforation level
Setting of the perforation depth.
The setting can also be adjusted by the
software.
The settings of conguration and software
are added together.
0
4 PrinterConguration
14 14
Backfeed
Start menu.
Select Setup > Printing.
Parameter Meaning Default
Backfeed
Method for backfeeding the label medium.
Backfeeding is necessary in the cutting
and peel-off modes since a label is pushed
out passed the front edge of the next label
above the print line when peeling off/cutting.
always: Backfeeding occurs independently of
label contents.
smart: Backfeeding only occurs when the
next label is not yet completely prepared
when peeling off/cutting the current label.
Otherwise, the second label is pushed on
and completed after removal of the rst label
without backfeeding.
smart
Label Sensor
Start menu.
Select Setup > Labels.
Parameter Meaning Default
Label sensor
Method for detecting the starting end of the
label.
Gap Sensor: Detection using changes in the
transparency between the label and label
gap.
Bottom-Reflect: Detection using reex marks on
the bottom of the medium.
Continuous media: Checking the existence of
media only.
Gap sensor
4 PrinterConguration
155 Cleaning and Replacing the Blades
!
Warning!
Disconnect the printer from the electrical outlet.
!
Warning!
Risk of injury. The cutter blades are sharp.
i
Notice!
When cutting through the label material instead of the label gap
remains of adhesive may accumulate on the blades. If operating in
backfeed mode, such remains of adhesive may be deposited on the
drive roller as well.
Clean the drive roller and the cutter blades often.
1
2
3
4
Figure 4 Dismount the cutter
1. Fold down cutter.
2. Push release push button (1) and lift blade unit (2) from the cover (4).
3. If the blades are only slightly dirty it is sufcient to clean them with a soft
cloth and continue with point 5.
16 165 Cleaning and Replacing the Blades
9
10
11
5
8
7
8
7
5
6
1312
Figure 5 Replacing the Blades Figure 6 Springs
4. If the blades are very dirty with residues of adhesive or if they are worn,
change blades:
Turn the shaft (6) clockwise using a torx wrench TX10 until the gear
racks (7) cannot engage anymore.
Pull the upper blade (9) out of the guides (8).
Take out the lower blade (10).
Remove deposits on the blades with label remover and a soft cloth.
If necessary, replace the blades.
Push the lower blade down into the guides (11).
If necessary, put the springs (12) back into the spring retainers (13).
To re-mount the upper blade push the lower blade down on the cover
and push the upper blade into the guide until the gear racks (7) can
engage with the gear wheels (5).
Turn the shaft (6) counterclockwise using a torx wrench TX10 until the
blade reaches the upper limit.
5. Fit the blade unit (3) according to Fig. 4 into the axes (2) and fold it
towards the cover (4) until it snaps in.
6. Fold the cutter up to the printer.
176 Licenses
6.1 Reference to the EU Declaration of Conformity
The cutters and perforation cutters of the EOS series comply with the relevant
fundamental regulations of the EU Rules for Safety and Health:
• Directive 2014/30/EU relating to electromagnetic compatibility
• Directive 2011/65/EU on the restriction of the use of certain hazardous
substances in electrical and electronic equipment
EU Declaration of Conformity
https://www.cab.de/media/pushle.cfm?le=3432
6.2 FCC
NOTE : This equipment has been tested and found to comply with the
limits for a Class A digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial
environment. The equipment generates, uses, and can radiate radio
frequency and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio commu-
nications. Operation of this equipment in a residential area is likely to
cause harmful interference in which case the user may be required to
correct the interference at his own expense.
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
CAB Accessories label printers User manual
- Type
- User manual
- This manual is also suitable for
CAB Accessories label printers are versatile and efficient devices designed to meet the diverse labeling needs of various industries. Their compact size and user-friendly design make them ideal for desktop use, while their advanced features and capabilities enable them to handle a wide range of labeling tasks with precision and accuracy. These printers excel in producing high-quality labels, tags, and receipts, making them suitable for applications in retail, healthcare, manufacturing, and logistics, among others.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
