Prime-Line TH 22142 Operating instructions

Type
Operating instructions

Prime-Line TH 22142 is a T-Crank Operator Handle designed to replace old or damaged crank handles on operator spindles. It features a concealed detent spring that securely locks the handle in place, ensuring reliable operation. The T-shaped design provides a comfortable grip and allows for easy opening and closing of windows and doors. The handle can be installed easily by snapping it onto the spindle and pressing it firmly. It is made of durable materials and is suitable for both residential and commercial applications.

Prime-Line TH 22142 is a T-Crank Operator Handle designed to replace old or damaged crank handles on operator spindles. It features a concealed detent spring that securely locks the handle in place, ensuring reliable operation. The T-shaped design provides a comfortable grip and allows for easy opening and closing of windows and doors. The handle can be installed easily by snapping it onto the spindle and pressing it firmly. It is made of durable materials and is suitable for both residential and commercial applications.

T-Crank Operator Handle
Manivela tip "T" para mecanismo operador
Poignée de manivelle en T
TH-22142
NOTE: Installation drawings are typical for this style of replacement part. They may not
show a part identical to the one you are installing.
NOTA: Los dibujos para la instalación son genéricos para repuestos de este tipo; por lo
que podrían no mostrar una pieza idéntica a la que usted esté instalando.
REMARQUE : Les dessins d'installation sont typiques pour ce style de pièce de
rechange. Ils pourraient ne pas illustrer une pièce identique à celle que vous installez.
TH 22142-INS
26950 San Bernardino Ave., Redlands, CA 92374
© 2010 Prime-Line Products
11/32"
9 mm
Instructions • instrucciones para la instalacion •
Instructions D'installation
To install new Crank or "T" Handle:
1. Loosen set screw on crank handle if available and carefully pull handle
from operator spindle.
2. Snap-on new crank handle.
3. When "T" handle is installed, be sure to check that handle orientation is
parallel to sill. Press handle onto spindle. A concealed detent spring will
lock handle to spindle.
Para instalar la manivela o la manija "T":
1. Afloje el tornillo que se encuentra en la manija si disponible de la
manivela y quite cuidadosament la manija del mandril del operador.
2.Empuje a instalar la nueva manija.
3.Cuando la manija "T" ha sido instalada, asegúrese de verificar que la ori
entación esté paralela al pretil antes de apretar el tornillo. Empuje la mani
ja sobre el mandril. Un resorte escondido bloqueará la manija sobre el
mandril.
Pour installer - la manivelle ou la poignée en "T":
1. Relâchez la vis située sur la poignée de la manivelle disponible du si et
retirez avec soin la poignée de la tige de manivelle.
2.Poussée la nouvelle poignée.
3.Lorsque la poignée en "T" est installée, assurez-vous que l'orientation de
la poignée est parallèle au rebord de fenêtre, avant de resserrer la vis.
Glissez la poignée sur la tige; un ressort caché fixera la poignée à la tige.
  • Page 1 1

Prime-Line TH 22142 Operating instructions

Type
Operating instructions

Prime-Line TH 22142 is a T-Crank Operator Handle designed to replace old or damaged crank handles on operator spindles. It features a concealed detent spring that securely locks the handle in place, ensuring reliable operation. The T-shaped design provides a comfortable grip and allows for easy opening and closing of windows and doors. The handle can be installed easily by snapping it onto the spindle and pressing it firmly. It is made of durable materials and is suitable for both residential and commercial applications.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI