KFA58SIM
Benutzerinformation Induktions-Kochfeld
Notice d'utilisation Table de cuisson à
induction
Istruzioni per l’uso Piano cottura a
induzione
User manual Induction Hob
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Thank you for choosing one of our high-quality products.
To ensure optimal and regular performance of your appliance please read this
instruction manual carefully. It will enable you to navigate all processes perfectly
and most efficiently. To refer to this manual any time you need to, we recommend
you to keep it in a safe place. And please pass it to any future owner of the
appliance.
We wish you much joy with your new appliance.
CONTENTS
SAFETY INFORMATION 41
INSTALLATION INSTRUCTIONS 42
PRODUCT DESCRIPTION 45
OPERATING INSTRUCTIONS 46
Activation and deactivation 46
Automatic Switch Off 46
The heat setting 47
Automatic Heat Up 47
Power function 47
Timer 48
STOP+GO 48
Lock 48
The child safety device 48
HELPFUL HINTS AND TIPS 49
CARE AND CLEANING 50
WHAT TO DO IF… 51
ENVIRONMENT CONCERNS 52
Packaging material 52
Subject to change without notice
SAFETY INFORMATION
For your safety and correct operation of the appliance, read this manual carefully before
the installation and use. Always keep these instructions with the appliance also if you move
or sell it. The users must fully know the operation and safety functions of the appliance.
Children and vulnerable people safety
WARNING!
Do not let persons, children included, with reduced physical sensory, reduced mental func-
tions or lack of experience and knowledge to use the appliance. They must have supervision
or instruction for the operation of the appliance by a person who is responsible for their
safety.
• Keep all packaging away from children. There is the risk of suffocation or injury.
• Keep the children away from the appliance during and after the operation, until the ap-
pliance is cold.
WARNING!
Activate the child safety device to prevent small children and pets from an accidental acti-
vation of the appliance.
Contents
41
Safety during operation
• Remove all packaging, stickers and layers from the appliance before the first use.
• Set the cooking zones to "off" after each use.
• The risk of burns! Do not put the objects made of metal, for example cutlery or saucepan
lids, on the surface that you cook. They can become hot.
• The Users with an implanted pacemaker must keep their upper body minimum 30 cm
from induction cooking zones that are activated.
WARNING!
Fire risk! Too hot fats and oils can occur with ignition very quickly.
Correct operation
• Always monitor the appliance during operation.
• The appliance is only for domestic use!
• Do not use the appliance as a work or a storage surface.
• Do not put or keep very flammable liquids and materials, easy fusible objects (made of
plastic or aluminium) on or near the appliance.
• Be careful when you connect the appliance to the near sockets. Do not let the electricity
bonds touch the appliance or hot cookware. Do not let the electricity bonds to tangle.
How to prevent a damage to the appliance.
• If the objects or cookware fall on the glass, the surface can be damaged.
• Cookware made of cast iron, cast aluminium or with damaged bottoms can cause
scratch of the glass. Do not move them on the surface.
• Do not let cookware boil dry to prevent the damage to cookware and glass .
• Do not use the cooking zones with empty cookware or without cookware.
• Do not put the aluminium foil on the appliance.
• Make sure that the airflow space of 5 mm between the worktop and front of the unit
below it stays opened.
WARNING!
If there is a crack on the surface, disconnect power supply to prevent the electrical
shock.
INSTALLATION INSTRUCTIONS
Before the installation, note down the serial number (Ser. Nr.) from the rating plate.The
rating plate of the appliance is on its lower casing.
Induction 7,4 kW
KFA58SIM
949 593 404 00
58 GAD D5 AU
220-240 V 50-60 Hz
7,4 kW
AEG-Electrolux
The Safety Instructions
WARNING!
You must read these!
42 Installation instructions
• Make sure that the appliance is not damaged because of transportation. Do not connect
a damaged appliance. If it is necessary, speak to the supplier.
• Only an authorized servicing technician can install, connect or repair this appliance. Use
only original spare parts.
• Only use the built-in appliances after you assemble the appliance into correct built-in
units and work surfaces that align to the standards.
• Do not change the specifications or change this product. Risk of injury and damage to
the appliance.
• Fully obey the laws, ordinances, directives and standards in force in the country where
you use the appliance (safety regulations, recycling regulations, electrical safety rules
etc.)!
• Keep the minimum distances to other appliances and units!
• Install shock protection, for example install the drawers only with a protective floor di-
rectly below the appliance!
• Keep safe the cut surfaces of the worktop from moisture with a correct sealant!
• Seal the appliance to the work top with no space between with a correct sealant!
• Keep safe the bottom of the appliance from steam and moisture, e.g. from a dishwasher
or oven!
• Do not install the appliance adjacent to doors and below windows! If not, when you
open the doors or windows they can push off hot cookware from the appliance.
WARNING!
Risk of injury from electrical current. Carefully obey the instructions for electrical connec-
tions.
• The electrical mains terminal is live.
• Make electrical mains terminal free of voltage.
• Install correctly to give shock protection.
• Loose and incorrect plug and socket connections can make the terminal become too hot.
• A qualified electrician must install the connections in the clamps correctly.
• Use a strain relief clamp on cable.
• Use the correct mains cable of type H05BB-F Tmax 90°C (or higher) for a single phase or
two phase connection.
• Replace the damaged mains cable with a special cable (type H05BB-F Tmax 90°C; or
higher). Speak your local Service Centre.
The appliance must have the electrical installation which lets you disconnect the appliance
from the mains at all poles with a contact opening width of minimum 3 mm.
You must have correct devices to isolate: line protecting cut-outs, fuses (screw type fuses
removed from the holder), earth leakage trips and contactors.
Installation instructions
43
Assembly
min.
50mm
min.
50mm
min.
500mm
min.
5mm
=
=
490
+1
mm
560
+1
mm
600mm
R 5mm
min.
25 mm
min.
5 mm
min.
20 mm
min.
38 mm
min.
5 mm
If you use a protection box (the additional acces-
sory), the front airflow space of 5 mm and protec-
tive floor directly below the appliance are not
necessary.
44 Installation instructions
PRODUCT DESCRIPTION
General overview
210
mm
180
mm
180
mm
145
mm
1 2
45
3
1 Induction cooking zone 1800 W, with
Power function 2800 W (minimum
cookware diameter =145mm).
2 Induction cooking zone 1800 W, with
Power function 2800 W (minimum
cookware diameter =145mm).
3 Induction cooking zone 1400 W, with
Power function 2500 W (minimum
cookware diameter =125mm).
4 Control panel
5 Induction cooking zone 2300 W, with
Power function 3700 W (minimum
cookware diameter =180mm).
Control panel layout
1 2 3 4 5 6 7
8910
Use the sensor fields to operate the appliance. The displays, indicators and sounds tell which
functions operate.
sensor field function
1
It activates and deactivates the appliance
2
It locks/unlocks the control panel
3
A heat setting display It shows the heat setting
4
Cooking zones' indicators of timer It shows for which zone you set the time
5
The timer display It shows the time in minutes
6
/ It increases or decreases the heat setting
7
It activates the Power function
8
/
It increases or decreases the time
9
It selects the cooking zone
Product description 45
sensor field function
10
It activates and deactivates the STOP+GO function
Heat setting displays
Display Description
The cooking zone is deactivated.
Keep warm/STOP+GO function operates.
- / -
The cooking zone operates.
Automatic Heat Up function operates.
Not correct cookware or too small cookware or no cookware on the
cooking zone.
There is a malfunction
A cooking zone is still hot (residual heat)
Lock/ The Child Safety device operates.
Power function operates.
The Automatic Switch Off operates.
Residual heat indicator
WARNING!
The risk of burns from residual heat!
The induction cooking zones make the heat necessary for cooking directly in the bottom of
the cookware. The glass ceramic is hot from the heat of the cookware.
OPERATING INSTRUCTIONS
Activation and deactivation
Touch for 1 second to activate or deactivate the appliance.
Automatic Switch Off
The function deactivates the appliance automatically if:
• All cooking zones are deactivated (
).
• You do not set the heat setting after you activate the appliance.
• You spill something or put something on the control panel for more than 10 seconds, (a
pan, a cloth, etc.). The sound operates some time and the appliance deactivates. Remove
the object or clean the control panel.
• The appliance become too hot (e.g. when, a saucepan boils dry). Before you use the ap-
pliance again, the cooking zone must be cool.
• You use not correct cookware. The symbol
comes on and the cooking zone deacti-
vates automatically after 2 minutes.
46 Operating instructions
• You do not deactivate a cooking zone or change the heat setting. After some time,
comes on and the appliance deactivates. See the table.
The times of Automatic Switch Off
The heat setting
- - -
The cooking
zone deactivates
after
6 hours 5 hours 4 hours 1.5 hours
The heat setting
Touch to increase the heat setting. Touch to decrease the heat setting. The display
shows the heat setting. Touch
and at the same time to deactivate the cooking zone.
Automatic Heat Up
You can get a necessary heat setting in a shorter
time if you activate the Automatic Heat Up func-
tion. This function sets the highest heat setting
for some time (see the illustration), and then de-
creases to the necessary heat setting.
To start the Automatic Heat Up function for a
cooking zone:
1. Touch
. The symbol comes on in the
display.
2. Immediately touch
. The symbol comes
on in the display.
3. Immediately touch
again and again until
the necessary heat setting comes on. After 3
seconds
comes on in the display.
To stop the function touch
.
Power function
The Power function makes more power available to the induction cooking zones. The Power
function is activated for 10 minutes at most. After, that the induction cooking zone auto-
matically sets back to highest heat setting. To activate, touch
, comes on. To deacti-
vate, touch
or .
Power management
The power management divides the power be-
tween two cooking zones in a pair (see the illus-
tration). The power function increases the power
to the maximum level for one cooking zone in the
pair. Automatically decreases the power in the
second cooking zone to a lower level. The display
for the reduced zone change between two levels.
1
2
3
4
5
6
7
8
9
10
11
0
123456789
Operating instructions 47
Timer
Use the Count Down Timer to set how long the cooking zone operates for only this one
time.
Set the Timer after the selection of the cooking zone.
You can set the heat setting before or after you set the timer.
• To set the cooking zone:touch
again and again until the indicator of a necessary
cooking zone comes on.
• To activate or change the Timer: touch
or of the timer to set the time (
00
-
99
minutes). When the indicator of the cooking zone starts to flash slow, the time
counts down.
• To deactivate the Timer: set the cooking zone with
and touch to deactivate the
Timer. The remaining time counts back to
00
. The indicator of the cooking zone goes
out.
• To see the remaining time: set the cooking zone with
. The indicator of the cooking
zone starts to flash quickly. The display shows the remaining time.
When the time comes to an end, the sound operates and
00
flashes. The cooking zone de-
activates.
• To stop the sound: touch
You can use the Timer as a minute minder while the cooking zones do not operate. Touch
. Touch or to set the time. When the time comes to an end, the sound operates
and
00
flashes
• To stop the sound: touch
STOP+GO
The function sets all cooking zones that operate to the lowest heat setting ( ).
When
operates, you cannot change the heat setting.
The
function does not stop the timer function.
• To activate this function touch
. The symbol comes on.
• To deactivate this function touch
. The heat setting that you set before comes on.
Lock
When the cooking zones operate, you can lock the control panel, but not . It prevents an
accidental change of the heat setting.
First set the heat setting.
To start this function touch
. The symbol comes on for 4 seconds.
The Timer stays on.
To stop this function touch
. The heat setting that you set before comes on.
When you stop the appliance, you also stop this function.
The child safety device
This function prevents an accidental operation of the appliance.
To activate the child safety device
• Activate the appliance with
. Do not set the heat settings.
• Touch
for 4 seconds. The symbol comes on.
• Deactivate the appliance with
.
48 Operating instructions
To deactivate the child safety device
• Activate the appliance with
. Do not set the heat settings. Touch for 4 seconds.
The symbol
comes on.
• Deactivate the appliance with
.
To override the child safety device for only one cooking time
• Activate the appliance with
. The symbol comes on.
• Touch
for 4 seconds. Set the heat setting in 10 seconds. You can operate the ap-
pliance.
• When you deactivate the appliance with
, the child safety device operates again.
HELPFUL HINTS AND TIPS
Use the induction cooking zones with correct cookware.
Cookware for induction cooking zones
For induction cooking zones a strong electro-magnetic field creates the heat in the cook-
ware very quickly.
Cookware material
• correct: cast iron, steel, enamelled steel, stainless steel, the bottom made of multi-layer
(with correct mark from a manufacturer).
• not correct: aluminium, copper, brass, glass, ceramic, porcelain.
Cookware is correct for an induction hob if …
• ... some water boils very quickly on a zone set to the highest heat setting..
• ... a magnet pulls on to the bottom of the cookware.
The bottom of the cookwar must be as thick and flat as possible.
Cookware dimensions: induction cooking zones adapt to the dimension of the bottom of
the cookware automatically to some limit.
The noises during operation
If you can hear
• crack noise: cookware is made of different materials (Sandwich construction).
• whistle sound: you use one or more cooking zones with high power levels and the cook-
ware is made of different materials (Sandwich construction).
• humming: you use high power levels.
• clicking: electric switching occurs.
• hissing, buzzing: the fan operates.
The noises are normal and do not refer to appliance malfunction.
Energy saving
• If it is possible, always put the lids on the cookware.
• Put cookware on a cooking zone before you start it.
Helpful hints and tips
49
The Examples of cooking applications
The data in the table is for guidance only.
Heat
setting
Use to: Time Hints
1
Keep warm the food you cooked as re-
quired
Put a lid on a cookware
1-2 Hollandaise sauce, melt: butter, choco-
late, gelatine
5-25
min
Mix from time to time
1-2 Solidify: fluffy omelettes, baked eggs 10-40
min
Cook with a lid on
2-3 Simmer rice and milkbased dishes, heat-
ing up ready-cooked meals
25-50
min
Add the minimum twice as much
liquid as rice, mix milk dishes part
procedure through
3-4 Steam vegetables, fish, meat 20-45
min
Add some tablespoons of liquid
4-5 Steam potatoes 20-60
min
Use max. ¼ l water for 750 g of po-
tatoes
4-5 Cook larger quantities of food, stews
and soups
60-150
min
Up to 3 l liquid plus ingredients
6-7 Gentle fry: escalope, veal cordon bleu,
cutlets, rissoles, sausages, liver, roux,
eggs, pancakes, doughnuts
as nec-
essary
Turn halfway through
7-8 Heavy fry, hash browns, loin steaks,
steaks
5-15
min
Turn halfway through
9 Boil large quantities of water, cook pasta, sear meat (goulash, pot roast), deep-fry chips
The Power function is best to heat up large quantities of water.
Information on acrylamides
Important! According to the newest scientific knowledge, if you brown food (specially the
one which contains starch), acrylamides can pose a health risk. Thus, we recommend that
you cook at the lowest temperatures and do not brown food too much.
CARE AND CLEANING
Clean the appliance after each use.
Always use cookware with clean bottom.
WARNING!
The sharp objects and abrasive cleaning agents can cause damage to the appliance.
For your safety, do not clean the appliance with steam cleaners or high-pressure cleaners.
Scratches or dark stains on the glass-ceramic cause no effect on how the appliance oper-
ates.
50 Care and cleaning
To remove the dirt:
1. – Remove immediately:melted plastic, plastic foil, and food with sugar. If not, the dirt
can cause damage to the appliance. Use a special scraper for the glass . Put the scra-
per on the glass surface at an acute angle and move the blade on the surface .
– Remove after the appliance is sufficiently cool:limescale rings , water rings, fat
stains, shiny metallic discolorations. Use a special cleaning agent for glass ceramic or
stainless steel.
2. Clean the appliance with a moist cloth and some detergent.
3. At the end rub the appliance dry with a clean cloth.
WHAT TO DO IF…
Problem Possible cause and remedy
You cannot activate the appli-
ance or operate it.
• Activate the appliance again and set the heat setting in 10
seconds.
• You touched 2 or more sensor fields at the same time. Only
touch one sensor field.
• The Child Safety Device or the Lock or Stop+Go operates. See
the chapter Operating instruction.
• There is water or fat stains on the control panel. Clean the
control panel.
A Sound operates and the ap-
pliance deactivates.
A sound operates when the ap-
pliance is deactivated.
You put something on one or more sensor fields. Remove the ob-
ject from the sensor fields.
The appliance deactivates.
You put something on the . remove object from the sensor
field.
The residual heat indicator does
not comes on.
The cooking zone is not hot because it operated only for a short
time. If the cooking zone should be hot, speak to the service cen-
tre.
The Automatic Heat Up func-
tion does not operate.
• There is still residual heat on the cooking zone. Let the cooking
zone become sufficiently cool.
• The highest heat setting is set. The highest heat setting has the
same power as the Automatic Heat Up function.
The heat setting changes be-
tween two levels.
The Power management is activated. See the section Power man-
agement.
The sensor fields become hot. The cookware is too large or you out it too near to the controls.
Put large cookware on the rear cooking zones if it is necessary.
comes on
The Automatic Switch Off operates. Deactivate the appliance and
activate it again.
comes on
• No cookware on the cooking zone. Put cookware on the cook-
ing zone.
• Not correct cookware. Use the correct cookware.
• The diameter of the bottom of the cookware is too small for
the cooking zone. Move cookware to a smaller cooking zone.
What to do if… 51
Problem Possible cause and remedy
and number comes on.
There is an error in the appliance.
Disconnect the appliance from the electrical supply for some
time. Disconnect the fuse from the electrical system of the house.
Connect again. If
comes on again, speak to the service centre.
comes on
There is an error in the appliance, because a cookware boils dry.
The protection against become too hot for the cooking zone op-
erates. The Automatic Switch Off operates.
Deactivate the appliance. Remove the hot cookware. After, ap-
proximately 30 seconds activate the cooking zone again.
should go out of the display, residual heat indicator can stay. Let
the cookware become sufficiently cool and check it with the sec-
tion Cookware for the induction cooking zone.
If you tried the above solutions and cannot repair the problem, speak to your dealer or the
customer service. Give the data from the rating plate, three digit letter, code for the glass
ceramic (it is in the corner of the glass surface) and an error message that comes on.
Make sure, you operated the appliance correctly. If not the servicing by a customer service
technician or dealer will not be free of charge, also during the warranty period. The instruc-
tions about the customer service and conditions of guarantee are in the guarantee booklet.
ENVIRONMENT CONCERNS
The symbol on the product or on its packaging indicates that this product may not be
treated as household waste. Instead it should be taken to the appropriate collection point
for the recycling of electrical and electronic equipment. By ensuring this product is
disposed of correctly, you will help prevent potential negative consequences for the
environment and human health, which could otherwise be caused by inappropriate waste
handling of this product. For more detailed information about recycling of this product,
please contact your local council, your household waste disposal service or the shop where
you purchased the product.
Packaging material
The packaging materials are friendly to the environment and can be recycled. The plastic
components are identified by marking: >PE<,>PS<, etc. Discard the packaging materials as
household waste at the waste disposal facilities in your municipality.
52 Environment concerns
Page is loading ...
Page is loading ...
Page is loading ...
www.aeg-electrolux.com/shop
892934751-A-482010
/