Miller RCAP-1 Owner's manual
- Category
- Welding System
- Type
- Owner's manual
This manual is also suitable for
Miller RCAP-1 is a versatile tool that can be used for a variety of welding applications. It is a remote pendant control for the ARC PAK 350 welding power source, and when connected to the power source, it provides arc control/inductance control, output control, contactor control, and CC/CV (constant current/constant voltage) selection. With its 20 ft. (6.1 m) interconnecting cord and plug, this unit is easy to use and can be positioned for optimal comfort and control during welding.
Miller RCAP-1 is a versatile tool that can be used for a variety of welding applications. It is a remote pendant control for the ARC PAK 350 welding power source, and when connected to the power source, it provides arc control/inductance control, output control, contactor control, and CC/CV (constant current/constant voltage) selection. With its 20 ft. (6.1 m) interconnecting cord and plug, this unit is easy to use and can be positioned for optimal comfort and control during welding.
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
Miller RCAP-1 Owner's manual
- Category
- Welding System
- Type
- Owner's manual
- This manual is also suitable for
Miller RCAP-1 is a versatile tool that can be used for a variety of welding applications. It is a remote pendant control for the ARC PAK 350 welding power source, and when connected to the power source, it provides arc control/inductance control, output control, contactor control, and CC/CV (constant current/constant voltage) selection. With its 20 ft. (6.1 m) interconnecting cord and plug, this unit is easy to use and can be positioned for optimal comfort and control during welding.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Miller RCAP-1 Owner's manual
-
-
-
-
-
-
-
-
-
Miller KA000000 Owner's manual