N o output voltage R emedy
P oor contact C lean the connection plug
N o voltage at output plug C heck the vehicle fuse and replace it if necessary
» Power 150« fuse burnt out T he fuse for the appliance is in the connection plug. Only
replace it with fuses of the same type.
T he battery voltage is too low S tart the vehicle’s engine to recharge the battery. Replace
the battery if necessary.
T he overload trip has tripped R educe the connected load to max. 150 VA.
T he safety functions of the
PDA have been activated
T hermal trip
This may trip if you connect appliances with a high power
requirements for a long period of time, particularly in the
simmer. Disconnect the appliance from the supply voltage
and wait until the appliance has cooled down. Reduce the
connected rating to max. 150 VA.
Battery undervoltage trip
Charge the battery and then reconnect the »Power 150«.
Troubleshooting
If this action does not produce the required effect, contact the supplier.
You should have the following information available when you do so:
- Error description
- When and how the error occurred
- Serial number and receipt
IMPORTANT
Please look at the polarity of the input voltage if you switch the polarity the apllicance may
be stroyed.
The input fuse for the applicance is in the input plug. Removing this plug, opening the appli-
ance or other unauthorised modifi cations to the appliance will render the warranty void.
There are no parts inside the applicance that require servicing.
Keep the charger away from children. Use only in dry rooms.
00046690bda.indd Abs1:7
00046690bda.indd Abs1:7
16.01.2008 10:15:40 Uhr
16.01.2008 10:15:40 Uhr