Globalsat GW-3 Quick start guide

Thank you for using GW3

GW3 is an activity tracking fitness watch which records your daily steps, calories and sleep

pattern. By connecting to your Apple® iOS device, you can check your daily activity information.

We believe GW3 would be your best 24 hours day and night fitness watch.

PS: Please note that the step, calorie and sleep data in your GW3 will be retained only for 7 days.

Please synchronize your GW3 with GW3 APP no longer than every 7 days to avoid losing your record.

Device Charge Method

1. Take out your GW3 main device from its band.

2. Charge your GW3 with micro-USB cable.

3. It takes about 2.5 hours to get fully charged.

For more detailed user guide, please visit http://www.globalsat.com.tw and search “GW3”.

App installation

To begin installation of GW3 app, scan the QR code in the right and your

Apple® iOS device will take you to Apple® App Store for downloading.

Device and App user guide

Step 1: Please fully charge your GW3 before first time use.

Step 2: Tap your GW3 for 2-3 times to illuminate your GW3. Then, tap or

shake again to change display pages.

Stpe3: Go to DEVICE page in your GW3 APP and pair your GW3 with

Apple® iOS device. Please note that you have to enter a code shown in your

GW3 into your GW3 APP during the pairing process.

Stpe4: You can use your GW3 to record your daily activity and check your

activity information via transferring your record to GW3 APP.