Yealink SIP-T40G Quick start guide

Brand: Yealink

Model: SIP-T40G

Category: IP phones

Type: Quick start guide

Yealink SIP-T40G is a sleek, feature-rich IP phone designed to improve business communications. With advanced telephony features, exceptional audio quality, and user-friendly interface, this phone empowers professionals to collaborate and communicate seamlessly. Enjoy crystal-clear calls, speed dial options for quick connections, and the ability to manage your contacts and call history with ease. The Yealink SIP-T40G is the perfect choice for professionals seeking enhanced communication capabilities.

Quick Start Guide (V84.60)

www.yealink.com

Ultra-elegant Gigabit

IP Phone

SIP-T40G

Applies to firmware version 76.84.0.60 or later.

Assembling the Phone

Packaging Contents

The following items are included in your package. If you find anything missing, contact your system administrator.

Package Contents

Assembling the Phone

1. Attach the stand, as shown below:

Stand

Handset Cord

Handset

IP Phone

Ethernet Cable

Power Adapter

Wall Mount Bracket

(Optional) (Optional)

Quick Start Guide

Desk Mount Method

BBB

404040

AAA

454545

Note:

2. Connect the handset and optional headset, as shown below:

Note: The headset or wireless headset adapter EHS36 should be purchased separately. EHS36 is used for connecting

the phone and a compatible wireless headset. For more information on how to use the EHS36

, refer to

Yealink EHS36 User Guide.

Note: We recommend that you use the accessories provided or approved by Yealink. The use of unapproved

third-party accessories may result in reduced performance.

You can also mount the phone to a wall. For more information on how to attach the wall mount bracket,

refer to Yealink Wall Mount Quick Installation Guide for Yealink IP Phones.

Wireless Headset Adapter EHS36

(2m CAT5E FTP Cable)

Startup

After the IP phone is connected to the network and

supplied with power, it automatically begins the

initialization process. After startup, the phone is ready

for use. You can configure the phone via phone user

interface or web user interfafce.

Welcome

Initializing... please wait

3. Connect the network and power, as shown below:

You have two options for network and power connections. Your system administrator will advise

you which one to use.

Note: The IP phone should be used with Yealink original power adapter (5V/600mA) only. The use of the

third-party power adapter may cause the damage to the phone. If you are connecting a PC to your phone,

we recommend that you use the Ethernet cable provided by Yealink.

If inline power (PoE) is provided, you do not need to connect the power adapter. Make sure the hub/switch

is PoE-compliant.

Power Adapter

(DC 5V)

IEEE 802.3af compliant

PoE Hub/Switch

PC Connection

(Optional)

AC Power Option

PoE ( Power over

Ethernet ) Option

PC Connection

(Optional)

Configuring Your Phone

Configuring via web user interface

Accessing the web user interface:

1. Press the OK key when the phone is idle to obtain the IP address of the phone.

2. Open the web browser of your computer, enter the IP address into the address bar (e.g.,

"http://192.168.0.10" or "192.168.0.10"), and then press the Enter.

3. Enter the user name (default: admin) and password (default: admin) in the login page and click Login.

Note: Check with your system administrator if any error appears during the registration process or if a specific

configuration is required for your registration.

Note: The IP phone also supports IPv6, but IPv6 is disabled by default.

The wrong network settings may result in inaccessibility of your phone and may have an impact on the

network performance. Contact your system administrator for more information.

Account Settings: Click on Account->Register->Account X (X=1,2,3)

Parameters of the account:

Line Active:

Label:

Display Name:

User Name:

Password:

Server Host:

It is provided by ITSP for registration (required).

It is authenticated ID for authentication provided by ITSP (required).

It is shown as Caller ID when placing a call.

It is shown on the LCD screen to identify the account.

You can select Enabled/Disabled to enable/disable the account.

It shows the register status of the current account.

Note: For more information on account parameters, refer to Configuring via web user interface above.

Network Settings: Click on Network->Basic->IPv4 Config

You can configure the network settings in the following ways:

DHCP: By default, the phone attempts to contact a DHCP server in your network to obtain its valid network

settings, e.g., IP address, subnet mask, gateway address and DNS address.

Static IP Address: If your phone cannot contact a DHCP server for any reason, you need to configure the IP

address, subnet mask, gateway address, primary DNS address and secondary DNS address

for the phone manually.

It is provided by ITSP for registration (required).

Configuring via phone user interface

Network Settings:

Press the Menu soft key when the phone is idle, select Settings->Advanced Settings (default password:

admin)->Network->WAN Port/VLAN/Web Server/802.1x/VPN/LLDP/CDP/NAT to configure the network.

Account Settings:

Press the Menu soft key when the phone is idle, select Settings->Advanced Settings (default password:

admin)->Accounts to configure the account.

Registered

Registering

Placing a Call

Answering a Call

Ending a Call

Using the handset:

Using the speakerphone:

Using the headset:

Using the handset:

Using the speakerphone:

Using the headset:

Using the handset:

1. With the handset on-hook, press .

1. Pick up the handset.

2. Enter the number, and then press the Send soft key.

1. With the headset connected, press to activate the headset mode.

2. Enter the number, and then press the Send soft key.

Pick up the handset.

Press .

Hang up the handset or press the EndCall soft key.

Press .

Basic Call Features

Note: During a call, you can alternate between the headset, hands-free speakerphone and handset modes by

pressing the HEADSET key, the Speakerphone key or by picking up the handset. Headset mode requires

a headset connected.

Note: You can reject an incoming call by pressing the Reject soft key.

Call Mute and Un-mute

Call Hold and Resume

To place a call on hold:

To resume the call, do one of the following:

Press to mute the microphone during a call.

Press again to un-mute the call.

If there is only one call on hold, press the Resume soft key.

Press the Hold soft key during an active call.

Press twice when the phone is idle to dial out the last dialed number.

Using the speakerphone:

Using the headset:

Press or press the EndCall soft key.

Press the EndCall soft key.

Redial

Press to enter the Placed Calls list, press or to select the desired entry, and then press or

the Send soft key.

If there is more than one call on hold, press or to select the desired call, and then press the Resume

soft key.

Call Conference

1. Press the Conf soft key during an active call. The call is placed on hold.

Call Forward

To enable call forward:

Always Forward----Incoming calls are forwarded unconditionally.

Busy Forward----Incoming calls are forwarded when the phone is busy.

No Answer Forward----Incoming calls are forwarded if not answered after a period of time.

2. Select the desired forward type:

4. Press the Save soft key to accept the change.

3. Enter the number you want to forward to. For No Answer Forward, press or to select the desired

ring time to wait before forwarding from the After Ring Time field.

4. Press the EndCall soft key to disconnect all parties.

2. Enter the number of the second party, and then press the Send soft key.

3. Press the Conf soft key again when the second party answers. All parties are now joined in the conference.

Note: You can split the conference call into two individual calls by pressing the Split soft key.

1. Press the Menu soft key when the phone is idle, and then select Features->Call Forward.

Speed Dial

To configure a speed dial key:

To use the speed dial key:

1. Press the Menu soft key when the phone is idle, and then select Features->DSS Keys.

2. Select the desired line key, and then press the Enter soft key.

4. Press the Save soft key to accept the change.

Press the speed dial key to dial out the preset number.

3. Select SpeedDial from the Type field, select the desired line from the Account ID field, enter a label in the

Label field and then enter the number in the Value field.

Semi-Attended Transfer

Attended Transfer

Blind Transfer

Call Transfer

You can transfer a call in the following ways:

1. Press the Trans soft key during an active call. The call is placed on hold.

2. Enter the number you want to transfer to, and then press the Send soft key.

3. Press the Trans soft key when the second party answers.

2. Enter the number you want to transfer to, and then press the Send soft key.

3. Press the Trans soft key when you hear the ring-back tone.

3. Press the B Trans soft key.

2. Enter the number you want to transfer to.

Voice Message

To listen to voice messages:

2. Follow the voice prompts to listen to your voice messages.

Contact Directory

Customizing Your Phone

Call History

1. Press the History soft key when the phone is idle, press or to scroll through the list.

If you press the Option soft key, you can also do the following:

Customizing Your Phone

Message waiting indicator on the idle screen indicates that one or more voice messages are waiting at the

message center. The power indicator LED slowly flashes red.

Volume Adjustment

Press when the phone is idle or ringing to adjust the ringer volume.

Note: You can add contacts from call history easily. For more information, refer to Call History above.

Press during a call to adjust the receiver volume of the handset/speakerphone/headset.

Select Detail to view detailed information about the entry.

Select Add to Contacts to add the entry to the local directory.

Select Add to Blacklist to add the entry to the blacklist.

Select Delete All to delete all entries from the list.

Press the Send soft key to call the entry.

Press the Delete soft key to delete the entry from the list.

2. Select an entry from the list, you can do the following:

To add a contact:

To edit a contact:

To delete a contact:

1. Press the Dir soft key when the phone is idle, and then select

All Contacts

2. Press the Add soft key to add a contact.

1. Press the Dir soft key when the phone is idle, and then select All Contacts.

3. Press the OK soft key when the LCD screen prompts “Delete selected item?”.

3. Edit the contact information.

4. Press the Save soft key to accept the change.

4. Press the Add soft key to accept the change.

3. Enter a unique contact name in the Name field, and enter the phone number in the proper field.

2. Press or to select the desired entry, press the Option soft key and then select Detail.

2. Press or to select the desired entry, press the Option soft key and then select Delete.

Ring Tones

1. Press the Menu soft key when the phone is idle, and then select Settings->Basic Settings->Sound->

Ring Tones.

3. Press or to select the desired ring tone.

4. Press the Save soft key to accept the change.

1. Press or the Connect soft key.

2. Press or to select Common or the desired account and then press the Enter soft key.

T4 0 G- E N

Regulatory Notices

YEALINK(XIAMEN) NETWORK TECHNOLOGY CO.,LTD.

Web: www.yealink.com

YEALINK(XIAMEN) NETWORK

TECHNOLOGY CO.,LTD

About Yealink

Technical Support

Visit Yealink WIKI (http://support.yealink.com/) for the latest firmware, guides, FAQ, Product documents, and more. For better service,

we sincerely recommend you to use Yealink Ticketing system (https://ticket.yealink.com) to submit all your technical issues.

Yealink is a global leading provider of enterprise communication and collaboration solutions, offering video conferencing service to

worldwide enterprises. Focusing on research and development, Yealink also insists on innovation and creation. With the outstanding

technical patents of cloud computing , audio, video and image processing technology, Yealink has built up a panoramic collaboration

solution of audio and video conferencing by merging its cloud services with a series of endpoints products. As one of the best

providers in more than 140 countries and regions including the US, the UK and Australia, Yealink ranks No.1 in the global market

share of SIP phones shipments.

Operating Ambient Temperatures

Operating temperature: +32 to 104°F (0 to 40°C)

Relative humidity: 5% to 90%, noncondensing

Storage temperature: -22 to +160°F (-30 to +70°C)

Warranty

Our product warranty is limited only to the unit itself, when used normally

in accordance with the operating instructions and the system environment.

We are not liable for damage or loss resulting from the use of this product,

or for any claim from a third party. We are not liable for problems with

Yealink device arising from the use of this product; we are not liable for

financial damages, lost profits, claims from third parties, etc., arising from

the use of this product.

Explanation of the symbols

DC symbol

is the DC voltage symbol.

WEEE Warning symbol

To avoid the potential effects on the environment and human health

as a result of the presence of hazardous substances in electrical and

electronic equipment, end users of electrical and electronic

equipment should understand the meaning of the crossed-out wheeled bin

symbol. Do not dispose of WEEE as unsorted municipal waste and have to

collect such WEEE separately.

Restriction of Hazardous Substances Directive (RoHS)

This device complies with the requirements of the EU RoHS Directive. Statements

of compliance can be obtained by contacting [email protected].

Safety Instructions

Save these instructions. Read these safety instructions before use!

General Requirements

Before you install and use the device, read the safety instructions

carefully and observe the situation during operation.

During the process of storage, transportation, and operation, please

always keep the device dry and clean, avoid collision and crash.

Please attempt not to dismantle the device by yourself. In case of any

discrepancy, please contact the appointed maintenance center for repair.

Please refer to the relevant laws and statutes while using the device.

Legal rights of others should be respected as well.

Environmental Requirements

Place the device at a well-ventilated place. Do not expose the device

under direct sunlight.

Keep the device dry and free of dusts.

Do not place the device on or near any inflammable or fire-vulnerable

object, such as rubber-made materials.

Keep the device away from any heat source or bare fire, such as a candle

or an electric heater.

Operating Requirements

Do not let a child operate the device without guidance.

Do not let a child play with the device or any accessory in case of

accidental swallowing.

Please use the accessories provided or authorized by the manufacturer

only.

The power supply of the device shall meet the requirements of the input

voltage of the device. Please use the provided surge protection power

socket only.

Before plugging or unplugging any cable, make sure that your hands are

completely dry.

Do not spill liquid of any kind on the product or use the equipment near

water, for example, near a bathtub, washbowl, kitchen sink, wet

basement or near a swimming pool.

During a thunderstorm, stop using the device and disconnect it from the

power supply. Unplug the power plug and the Asymmetric Digital

Subscriber Line (ADSL) twisted pair (the radio frequency cable) to avoid

lightning strike.

If the device is left unused for a rather long time, disconnect it from the

power supply and unplug the power plug.

When there is smoke emitted from the device, or some abnormal noise

or smell, disconnect the device from the power supply, and unplug the

power plug immediately.

Contact the specified maintenance center for repair.

Do not insert any object into equipment slots that is not part of the

product or auxiliary product.

Before connecting a cable, connect the grounding cable of the device

first. Do not disconnect the grounding cable until you disconnect all other

cables.

Cleaning Requirements

Before cleaning the device, disconnect it from the power supply.

Use a piece of soft, dry and anti-static cloth to clean the device.

Keep the power plug clean and dry.

Troubleshooting

The unit cannot supply power to Yealink device.

There is a bad connection with the plug.

1. Clean the plug with a dry cloth.

2. Connect it to another wall outlet.

The usage environment is out of operating temperature range.

1. Use in the operating temperature range.

The cable between the unit and the Yealink device is connected incorrectly.

1. Connect the cable correctly.

You cannot connect the cable properly.

1. You may have connected a wrong Yealink device.

2. Use the correct power supply.

Some dust, etc., may be in the port.

1. Clean the port.

Contact your dealer or authorized service facility for any further questions.

FCC Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the

following

two conditions: (1) this device may not cause harmful interference, and (2) this

device must accept any interference received, including interference that may

cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible

for compliance could void the user's authority to operate the equipment.

IC Statement

This device complies with Industry Canada’s licence-exempt RSSs. Operation is

subject to the following two conditions:

(1) this device may not cause interference; and

(2) this device must accept any interference, including interference that may

cause undesired operation of the device. CAN ICES-3(B)

Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux

appareils radio exempts de licence. L’exploitation est autorisée aux deux

conditions suivantes :

(1) l’appareil ne doit pas produire de brouillage;

(2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi,

même si le brouillage est susceptible d’en compromettre le

fonctionnement.NMB-3(B)

Contact Information

YEALINK NETWORK TECHNOLOGY CO.,LTD.

309, 3rd Floor, No.16, Yun Ding North Road, Huli District, Xiamen City, Fujian, P.R. China

YEALINK (EUROPE) NETWORK TECHNOLOGY B.V.

Strawinskylaan 3127, Atrium Building, 8th floor, 1077ZX Amsterdam, The Netherlands

YEALINK (USA) NETWORK TECHNOLOGY CO., LTD.

999 Peachtree Street Suite 2300, Fulton, Atlanta, GA, 30309, USA

Made in China

Yealink SIP-T40G Quick start guide

Brand: Yealink

Model: SIP-T40G

Category: IP phones

Type: Quick start guide

Download PDF

report

Yealink SIP-T40G Quick start guide

Yealink SIP-T40G Quick start guide

Related papers

Other documents