LG HR929S User manual

Category
Blu-Ray players
Type
User manual
OWNER’S MANUAL
Blu-ray Disc
/DVD Player
with built-in HDD &
HD Tuner
HR925S/HR929S
www.lg.com
Please read this manual carefully before operating
your set and retain it for future reference.
ENGLISH
Getting Started
3
Getting Started
1
Safety Information
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK DO NOT REMOVE COVER (OR BACK) NO
USER-SERVICEABLE PARTS INSIDE REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
This lightning ash with arrowhead
symbol within an equilateral triangle
is intended to alert the user to the
presence of uninsulated dangerous
voltage within the product’s
enclosure that may be of sucient magnitude to
constitute a risk of electric shock to persons.
The exclamation point within an
equilateral triangle is intended
to alert the user to the presence
of important operating and
maintenance (servicing)
instructions in the literature accompanying the
product.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE.
WARNING: Do not install this equipment in a
conned space such as a book case or similar unit.
CAUTION: Do not block any ventilation openings.
Install in accordance with the manufacturers
instructions.
Slots and openings in the cabinet are provided for
ventilation and to ensure reliable operation of the
product and to protect it from over heating. The
openings shall be never be blocked by placing
the product on a bed, sofa, rug or other similar
surface. This product shall not be placed in a built-
in installation such as a bookcase or rack unless
proper ventilation is provided or the manufacturer’s
instruction has been adhered to.
CAUTION: This product employs a Laser System.
To ensure proper use of this product, please read
this owners manual carefully and retain it for future
reference. Shall the unit require maintenance,
contact an authorized service centre.
Use of controls, adjustments or the performance of
procedures other than those specied herein may
result in hazardous radiation exposure.
To prevent direct exposure to laser beam, do not
try to open the enclosure.
CAUTION concerning the Power Cord
Most appliances recommend they be placed upon
a dedicated circuit;
That is, a single outlet circuit which powers only
that appliance and has no additional outlets or
branch circuits. Check the specication page of this
owners manual to be certain. Do not overload wall
outlets. Overloaded wall outlets, loose or damaged
wall outlets, extension cords, frayed power cords, or
damaged or cracked wire insulation are dangerous.
Any of these conditions could result in electric
shock or re. Periodically examine the cord of your
appliance, and if its appearance indicates damage
or deterioration, unplug it, discontinue use of the
appliance, and have the cord replaced with an
exact replacement part by an authorized service
centre. Protect the power cord from physical or
mechanical abuse, such as being twisted, kinked,
pinched, closed in a door, or walked upon. Pay
particular attention to plugs, wall outlets, and
the point where the cord exits the appliance. To
disconnect power from the mains, pull out the
mains cord plug. When installing the product,
ensure that the plug is easily accessible.
Getting Started
4
Getting Started
1
This device is equipped with a portable battery or
accumulator.
Safety way to remove the battery or the
battery from the equipment: Remove the
old battery or battery pack, follow the steps
in reverse order than the assembly. To prevent
contamination of the environment and bring on
possible threat to human and animal health, the
old battery or the battery put it in the appropriate
container at designated collection points. Do
not dispose of batteries or battery together with
other waste. It is recommended that you use
local, free reimbursement systems batteries and
accumulators. The battery shall not be exposed to
excessive heat such as sunshine, re or the like.
CAUTION: The apparatus shall not be exposed to
water (dripping or splashing) and no objects lled
with liquids, such as vases, shall be placed on the
apparatus.
Disposal of your old appliance
1. When this crossed-out wheeled bin
symbol is attached to a product it
means the product is covered by the
European Directive 2002/96/EC.
2. All electrical and electronic products
shall be disposed of separately
from the municipal waste stream
via designated collection facilities
appointed by the government or the
local authorities.
3. The correct disposal of your old
appliance will help prevent potential
negative consequences for the
environment and human health.
4. For more detailed information about
disposal of your old appliance, please
contact your city office, waste disposal
service or the shop where you
purchased the product.
Disposal of waste batteries/accumulators
1. When this crossed-out wheeled bin
symbol is attached to batteries/accu-
mulators of Your product it means they
are covered by European Directive
2006/66/EC.
2. This symbol may be combined with
chemical symbols for mercury(Hg),
cadmium(Cd) or lead(Pb) if the battery
Contains more that 0.0005% of mer-
cury, 0.002% of cadmium or 0.004%
of lead.
3. All batteries/accumulators should
be disposed separately from the
municipal waste stream via designated
collection facilities appointed by the
government or the local authorities.
4. The correct disposal of Your old batter-
ies/ accumulators will help to prevent
potential negative consequences for
the environment, animal and human
health.
5. For more detailed information about
disposal of Your old batteries/ accu-
mulators, please contact Your city o
ce, waste disposal service or the shop
where You purchased the product.
For Wireless product European Union Notice
LG Electronics hereby
declares that this/
these product(s) is/are
in compliance with the essential requirements and
other relevant provisions of Directive 1999/5/EC,
2004/108/EC, 2006/95/EC and 2009/125/EC.
Please contact to the following address for
obtaining a copy of the DoC (Declaration of
Conformity).
European Standards Centre:
Krijgsman 1, 1186 DM Amstelveen The Netherlands
Indoor use only.
RF Radiation Exposure Statement
This equipment should be installed and operated
with minimum distance 20cm between the radiator
and your body.
Getting Started
5
Getting Started
1
Notes on Copyrights
y
Recording equipment should be used only for
lawful copying and you are advised to check
carefully what is lawful copying in the area
in which you are making a copy. Copying of
copyright material such as lms or music is
unlawful unless permitted by a legal exception
or consented to by the rights owner.
y
This product incorporates copyright protection
technology that is protected by U.S. patents
and other intellectual property rights. Use of
this copyright protection technology must be
authorized by Rovi Corporation, and is intended
for home and other limited viewing uses only
unless otherwise authorized by Rovi Corporation.
Reverse engineering or disassembly is prohibited.
y
CONSUMERS SHOULD NOTE THAT NOT ALL
HIGH DEFINITION TELEVISION SETS ARE FULLY
COMPATIBLE WITH THIS PRODUCT AND MAY
CAUSE ARTIFACTS TO BE DISPLAYED IN THE
PICTURE. IN CASE OF 625 PROGRESSIVE SCAN
PICTURE PROBLEMS, IT IS RECOMMENDED
THAT THE USER SWITCH THE CONNECTION
TO THE ‘STANDARD DEFINITION’ OUTPUT. IF
THERE ARE QUESTIONS REGARDING OUR TV SET
COMPATIBILITY WITH THIS MODEL 625p UNIT
PLEASE CONTACT OUR CUSTOMER SERVICE
CENTRE.
y
Because AACS (Advanced Access Content
System) is approved as content protection
system for BD format, similar to use of CSS
(Content Scramble System) for DVD format,
certain restrictions are imposed on playback,
analogue signal output, etc., of AACS protected
contents. The operation of this product and
restrictions on this product may vary depending
on your time of purchase as those restrictions
may be adopted and/or changed by AACS after
the production of this product.
y
Furthermore, BD-ROM Mark and BD+ are
additionally used as content protection systems
for BD format, which imposes certain restrictions
including playback restrictions for BD-ROM
Mark and/or BD+ protected contents. To obtain
additional information on AACS, BD-ROM
Mark, BD+, or this product, please contact an
authorized Customer Service Centre.
y
Many BD-ROM/DVD discs are encoded with
copy protection. Because of this, you should only
connect your player directly to your TV, not to a
VCR. Connecting to a VCR results in a distorted
picture from copy-protected discs.
y
Under the U.S. Copyright laws and Copyright
laws of other countries, unauthorized recording,
use, display, distribution, or revision of television
programs, videotapes, BD-ROM discs, DVDs, CDs
and other materials may subject you to civil and/
or criminal liability.
y
Watching a 3D content for a long period
time may cause dizziness or tiredness.
y
It is not recommended to watch a movie
in 3D mode for inrm, child and pregnant
woman.
y
If you are experiencing headache, tiredness
or dizziness while viewing content in 3D, it is
strongly recommended to stop the playback
and rest until you feel normal.
>
Caution
Important Notice for TV colour
system
The colour system of this player diers according to
currently playing discs.
For example, when the player plays the disc
recorded in the NTSC colour system, the image is
output as an NTSC signal.
Only the multi system colour TV can receive all
signals output from the player.
y
If you have a PAL colour system TV, you will see
just distorted images when using discs or video
contents recorded in NTSC.
y
The multi system colour TV changes the colour
system automatically according to input signals.
In case that the colour system is not changed
automatically, turn it o and then on to see
normal images on screen.
y
Even if the disc recorded in NTSC colour system
are well displayed on your TV, these may not be
recorded correctly on your recorder.
Table of Contents
6
Table of Contents
1 Getting Started
3 Safety Information
8 Introduction
8 Playable discs and symbols used in this
manual
9 About the “7” symbol display
9 Compatibility notes
10 File compatibility
11 Regional Code
11 AVCHD (Advanced Video Codec High
Definition)
11 System Requirements
11 Compatibility Notes
11 What is SIMPLINK?
12 Remote control
13 Main Unit
2 Connecting
14 Connections to Your TV
14 Satellite Antenna connection
14 HDMI Connection
15 Satellite Setting
17 Component Video Connection
18 Composite connection
18 Resolution Setting
19 Connecting to an Amplifier
19 Connecting to an Amplifier via HDMI
Output
20 Connecting to an Amplifier via Digital
Audio Output
20 Connecting to an Amplifier via 2
Channel Audio Output
21 Connecting to your Home Network
21 Wired network connection
22 Wired Network Setup
23 Wireless network connection
23 Wireless Network Setup
26 USB device connection
26 Playback content in the USB device
3 System Setting
27 Auto Set UP
28 Home Menu Overview
28 Basic button operations
29 Settings
29 Adjust the Setup Settings
29 Satellite Setting
29 Editing Programme List (Channel Edit)
30 Setting the DTV Lock
30 Adjusting DTV Rating
30 Setting the Timeshift
31 [DTV] Menu
32 [DISPLAY] Menu
33 [LANGUAGE] Menu
34 [AUDIO] Menu
35 [LOCK] Menu
36 [NETWORK] Menu
37 [OTHERS] Menu
4 Operating
40 Using the Digital TV functions
40 Viewing the Digital TV
40 Changing Digital TV programmes
40 Setting favourite programmes
41 Viewing the programme information
41 Selecting DTV audio language
41 Selecting DTV subtitle language
42 Programme Guide (Digital program
only)
43 Using the timeshift function manually
43 Using the timeshift function
automatically
44 Using the teletext (Viewing Teletext)
44 Recording TV programmes
44 Normal Recording
45 Timer Recording (Manual)
46 Timer Recording (EPG)
46 Canceling a timer recording
46 Editing a timer recording
47 Instant Timer Recording
47 General Playback
47 Playing Discs
48 Using the disc menu
48 Resume playback
49 Playing the recorded titles
49 Searching the recorded titles
49 Sorting the recorded titles
Table of Contents
7
1
2
3
4
5
6
50 Playing content contained in the internal
hard disk drive
50 Searching content in the hard disk drive
by entering file name
51 Playing Blu-ray 3D disc
52 Advanced Playback
52 Repeat Playback
52 Repeating a specific portion
53 Changing content list view
53 Viewing content information
53 Selecting a subtitle file
54 Last Scene Memory
54 On-Screen display
54 Displaying content information on-
screen
55 Playing from selected time
56 Hearing different audio
56 Selecting a subtitle language
56 Watching from a different angle
56 Changing the TV Aspect Ratio
57 Changing the Picture Mode
57 Copying
57 Copying file(s)/folder(s) to the internal
hard disk drive
59 Copying file(s)/folder(s) from the
internal hard disk drive to a USB
storage device
60 Deleting a file(s)/folder(s)
61 Naming a file/folder
61 Enjoying BD-LIVE
62 Playing a file on a network server
63 Wi-Fi Direct™ Connection
65 Playing movie file and VR discs
65 Selecting a subtitle file
66 Changing subtitle code page
66 Viewing a photo
67 Options while viewing a photo
68 Listening to music during a slide show
69 Listening to music
69 Audio CD Recording
70 Viewing information from Gracenote
Media Database
71 Using the Music Library
73 Using the Photo Library
74 Using the Premium
74 Using the LG Apps
75 Signing in
75 Managing my Apps
75 Searching online content
5 Troubleshooting
76 Troubleshooting
76 – General
76 – Picture
77 – Sound
77 – Network
78 – Recording
78 Customer Support
78 Open source software notice
6 Appendix
79 Controlling a TV with the Supplied Remote
Control
79 Setting up the remote to control your
TV
80 Area Code List
81 Language code List
82 Trademarks and Licenses
84 Network Software Update
84 Network update notification
85 Software Update
86 MediaHome 4 Essentials
86 System requirements
86 Installing Nero MediaHome 4 Essentials
87 Sharing files and folders
88 Audio Output Specifications
89 About the internal hard disk drive
90 Video Output Resolution
91 Specifications
92 Maintenance
92 Notes on Discs
92 Handling the Unit
93 Important Information Relating to Network
Services
Getting Started
8
Getting Started
1
Introduction
Playable discs and symbols used in this manual
Media/Term Logo Symbol Description
Blu-ray
e
y
Discs such as movies that can be purchased or
rented.
y
“Blu-ray 3D” discs and “Blu-ray 3D ONLY” discs.
y
BD-R/RE discs that are recorded in BDAV format.
y
u
i
y
BD-R/RE discs that contain Video, Audio or
Photo les.
y
ISO 9660+JOLIET, UDF and UDF Bridge format
DVD-ROM
DVD-R
DVD-RW
DVD+R
DVD+RW
(12 cm)
r
y
Discs such as movies that can be purchased or
rented.
y
Video mode and nalized only
y
Supports the dual layer disc also
o
Finalized AVCHD format
y
u
i
y
DVD±R/RW discs that contain Video, Audio or
Photo les.
y
ISO 9660+JOLIET, UDF and UDF Bridge format
DVD-RW (VR)
(12 cm)
r
VR mode and nalized only
Audio CD
(12 cm)
t
Audio CD
CD-R/RW
(12 cm)
y
u
i
y
CD-R/RW discs that contain Video, Audio or
Photo les.
y
ISO 9660+JOLIET, UDF and UDF Bridge format
HDD
y
u
i
Movie, Music, Photo les contained in the HDD
REC
Titles recorded via this unit
Note
,
Indicates special notes and operating features.
Caution
>
Indicates cautions for preventing possible damages
from abuse.
Getting Started
9
Getting Started
1
y
Depending on the conditions of the
recording equipment or the CD-R/RW (or
DVD-R/RW) disc itself, some CD-R/RW (or
DVD
±
R/RW) discs cannot be played on the
unit.
y
Depending on the recording software & the
nalization, some of recorded discs (CD-R/
RW or DVD
±
R/RW) may not be playable.
y
BD-R/RE, DVD±R/RW and CD-R/RW discs
recorded using a personal computer or a
DVD or CD Recorder may not play if the
disc is damaged or dirty, or if there is dirt or
condensation on the player’s lens.
y
If you record a disc using a personal
computer, even if it is recorded in a
compatible format, there are cases in which
it may not play because of the settings of
the application software used to create the
disc. (Check with the software publisher for
more detailed information.)
y
This unit requires discs and recordings to
meet certain technical standards in order to
achieve optimal playback quality.
y
Pre-recorded DVDs are automatically set to
these standards. There are many dierent
types of recordable disc formats (including
CD-R containing MP3 or WMA les) and
these require certain pre-existing conditions
to ensure compatible playback.
y
Customers should note that permission
is required in order to download MP3 /
WMA les and music from the Internet.
Our company has no right to grant such
permission. Permission should always
be obtained from / guaranteed by the
copyright owner.
y
You have to set the disc format option
to [Mastered] in order to make the discs
compatible with the LG players when
formatting rewritable discs. If you set the
option to “Live System, the disc cannot be
played on LG player. (Mastered/Live File
System : Disc format system for windows
Vista)
y
The drive is slot looking you should insert
only round 77 or 120 mm disc. The drive
does not work with irregularly shaped discs,
which could damage the drive if inserted.
,
Note
About the “
7
” symbol display
7
may appear on your TV display during
operation and indicates that the function explained
in this owners manual is not available on that
specic media.
Compatibility notes
y
Because BD-ROM is a new format, certain disc,
digital connection and other compatibility issues
are possible. If you experience compatibility
problems, please contact an authorized
Customer Service Center.
y
This unit allows you to enjoy functions such
as picture-in-picture, secondary audio and
Virtual packages, etc., with BD-ROM supporting
BONUSVIEW (BD-ROM version 2 Prole 1 version
1.1). Secondary video and audio can be played
from a disc compatible with the picture-in-
picture function. For the playback method, refer
to the instructions in the disc.
y
Viewing high-denition content and up-
converting standard DVD content may require a
HDMI-capable input or HDCP-capable DVI input
on your display device.
y
Some BD-ROM and DVD discs may restrict the
use of some operation commands or features.
y
Dolby TrueHD, Dolby Digital Plus and DTS-HD are
supported with maximum 7.1 channels if you
use HDMI connection for the audio output of the
unit.
y
You can use a USB device to store some disc
related information, including downloaded
online content. The disc you are using will
control how long this information is retained.
For CI+ CAM, It takes more than 3 minutes to
authenticate at the rst time.
If you are using more 2 CI+ CAM, there could be
a failure in authentication when you change CI+
CAM, (It is a normal operation).
Please insert CAM again when the failure is
occurred.
Getting Started
10
Getting Started
1
File compatibility
Overall
Available File extensions: .jpg”, “.jpeg”, “.png”, “.avi”,
.divx”, “.mpg”, “.mpeg”, “.mkv, “.mp4”, “.mp3”, “.wav,
.wma, “.ts
y
There could be a variance on the available le
extensions depending on DLNA server.
y
The le name is limited to 180 characters.
y
Depending on the size and number of the les,
it may take several minutes to read the contents
on the media.
Maximum Files/Folder: Less than 2000 (total
number of les and folders)
CD-R/RW, DVD±R/RW, BD-R/RE Format:
ISO 9660+JOLIET, UDF and UDF Bridge format
MOVIE
Available resolution: 1920 x 1080 (W x H) pixels
Playable subtitle: SubRip (.srt / .txt), SAMI (.smi),
SubStation Alpha (.ssa/.txt), MicroDVD (.sub/.txt),
VobSub (.sub), SubViewer 1.0 (.sub), SubViewer 2.0
(.sub/.txt), DVD Subtitle System (.txt), TMPlayer (.txt)
Playable Codec format: “DIVX3.xx, “DIVX4.xx,
“DIVX5.xx, “XVID, “DIVX6.xx (Standard playback
only), H.264/MPEG-4 AVC, DIVX-HD, MPEG1 SS,
MPEG2 PS, MPEG2 TS
Playable Audio format: “Dolby Digital”, “DTS”,
“MP3”, “WMA, “AAC, “AC3”
y
Not all the WMA and AAC Audio formats are
compatible with this unit.
Sampling frequency: within 32-48 kHz (WMA),
within 16-48 kHz (MP3)
Bit rate: within 20-320 kbps (WMA), within 32-320
kbps (MP3)
y
HD movie les contained on the CD or USB
1.0/1.1 may not be played properly. BD, DVD
or USB 2.0 are recommended to play back
HD movie les.
y
This player supports H.264/MPEG-4 AVC
prole Main, High at Level 4.1. For a le
with higher level, there will be an warning
message on the screen.
y
This player does not support the le that
are recorded with GMC
*
1
or Qpel
*
2
. Those
are video encoding techniques in MPEG4
standard, like DivX or XVID.
*1 GMC – Global Motion Compensation
*2 Qpel – Quarter pixel
y
HD movie les that need high performance
playback could react slowly.
y
The total playback time indicated on the
screen may not be correct for .ts les.
,
Note
MUSIC
Sampling frequency: between 8 - 48 kHz (WMA),
within 11 - 48 kHz (MP3), 44.1 and 48 kHz (LPCM)
Bit rate: between 8 - 320 kbps (WMA, MP3), 768
kbps and 1.536 Mbps (LPCM)
y
This unit cannot support the ID3 Tag
embedded MP3 le.
y
The total playback time indicated on the
screen may not be correct for VBR les.
,
Note
PHOTO
Recommended size:
Less than 4,000 x 3,000 x 24 bit/pixel
Less than 3,000 x 3,000 x 32 bit/pixel
y
Progressive and lossless compression photo
image les are not supported.
y
Depending on the size and number of the photo
les, it may take several minutes to read the
contents of the media.
y
This player can not display thumbnail image in
some les.
Getting Started
11
Getting Started
1
Regional Code
This unit has a regional code printed on the rear of
the unit. This unit can play only BD-ROM or DVD
discs labelled same as the rear of the unit or ALL.
AVCHD (Advanced Video
Codec High Definition)
y
This player can playback AVCHD format discs.
These discs are normally recorded and used in
camcorders.
y
The AVCHD format is a high denition digital
video camera format.
y
The MPEG-4 AVC/H.264 format is capable of
compressing images at higher eciency than
the conventional image compressing format.
y
Some AVCHD discs use the x.v.Color format.
y
This player can playback AVCHD discs using
“x.v.Color format.
y
Some AVCHD format discs may not be played,
depending on the recording condition.
y
AVCHD format discs need to be nalized.
y
“x.v.Color oers a wider colour range than
normal DVD camcorder discs.
System Requirements
For high denition video playback:
y
High denition display that has COMPONENT or
HDMI input jacks.
y
BD-ROM disc with high denition content.
y
HDMI or HDCP capable DVI input on your display
device is required for some content (as specied
by disc authors).
y
For up-conversion of standard denition DVD, a
HDMI or HDCP capable DVI input on your display
device is required for copy-protected content.
For Dolby® Digital Plus, Dolby TrueHD and DTS-HD
multi-channel audio playback:
y
An amplier/receiver with a built-in (Dolby
Digital, Dolby Digital Plus, Dolby TrueHD, DTS or
DTS-HD) decoder.
y
Main, centre, surround speakers and subwoofer
as necessary for chosen format.
Compatibility Notes
y
Because BD-ROM is a new format, the can be
issues regarding certain disc, digital connection
and other compatibility issues. If you experience
compatibility problems, please contact an
authorized Customer Service Center.
y
Viewing high-denition content and up-
converting standard DVD content may require a
HDMI-capable input or HDCP-capable DVI input
on your display device.
y
Some BD-ROM and DVD discs may restrict the
use of some operation commands or features.
y
Dolby TrueHD, Dolby Digital Plus and DTS-HD are
supported with maximum 7.1 channels if you
use HDMI connection as the audio output.
y
You can use a USB device that is used to store
some disc related information, including
downloaded on-line content. The disc you are
using will control how long this information is
retained.
y
While watching 3D contents, on-screen displayed
may not be displayed properly. To display proper
on-screen display, turn o 3D mode on TV.
What is SIMPLINK?
Some functions of this unit are controlled by the
TVs remote control when this unit and LG TVs with
SIMPLINK are connected through HDMI connection.
Controllable functions by LG TVs remote control;
Play, Pause, Scan, Skip, Stop, Power O, etc.
Refer to the TV owner’s manual for the details of
SIMPLINK function.
LG TVs with SIMPLINK function has the logo as
shown above.
Depending on the disc type or playing status,
some SIMPLINK operation may dier from your
purpose or not work.
,
Note
Getting Started
12
Getting Started
1
Remote control
Battery Installation
Remove the battery cover on
the rear of the Remote Control,
and insert two R03 (size AAA)
batteries with
4
and
5
matched
correctly.
• • • • • •
a
• • • • • •
1
(POWER): Switches the player
ON or OFF.
B
(OPEN/CLOSE): Opens and
closes the disc tray.
MUTE (
@
): Mutes the sound.
EXIT: Exits a menu or hides on-
screen information.
SUBTITLE: Selects a subtitle
language.
TEXT: Switches between teletext
mode and normal TV viewing.
0-9 numerical buttons: Selects
numbered options in a menu.
CLEAR: Removes a mark on the
search menu or a number when
setting the password.
REPEAT (
h
): Repeats a
desired section or sequence.
TV/RADIO: Switches between TV
and radio modes.
• • • • • •
b
• • • • •
c/v
(SCAN): Searches
backward or forward.
C/V
(SKIP): Goes to the
next or previous chapter / track /
le.
Z
(STOP): Stops playback.
d
(PLAY): Starts playback.
M
(PAUSE): Pauses playback.
TIME SHIFT: Activates pause live
TV/playback (timeshift) for a live
TV programme.
• • • • • •
c
• • • • •
VOL (-/+): Adjusts the sound
level of the unit.
REC. (
X
): Starts recording.
CH LIST: Displays the Channel
list.
TIMER REC.: Displays [Timer
Recording] menu.
CH (
W/S
): Scans up or
down through memorized
programmes.
HOME (
n
): Displays or exits the
[Home Menu].
GUIDE: Displays the EPG menu.
MUSIC ID: When connected
to the network, can provide
information about the current
song while video playback.
INFO/MENU (
m
): Displays or
exits On-Screen Display.
Direction buttons: Selects an
option in the menu.
ENTER (
b
): Acknowledges
menu selection.
BACK (
1
): Exits the menu or
returns to the previous screen.
TITLE/POP UP: Displays the DVD
title menu or BD-ROM’s pop-up
menu, if available.
DISC MENU/REC.LIST: Accesses
menu on a disc or switches
between recording list menu.
• • • • • •
d
• • • • •
Coloured (R, G, Y, B) buttons:
Use to navigate BD-ROM menus.
They are also used for [MOVIE],
[PHOTO], [MUSIC], [Premium], [LG
Apps] and [DTV] menu.
TV Control Buttons: See page
79
Getting Started
13
Getting Started
1
Main Unit
a
Disc Slot
b
Display window
c
Remote Sensor
d
B
(Open/Close)
e
T
(Play/Pause)
f
I
(Stop)
g 1
(Power)
h
USB Port
a
ANTENNA IN
b
USB Port
If you want to record on external HDD, connect
external HDD to unit.
c
LAN port
d
HDMI OUT (1080p)
e
VIDEO OUT
f
2CH AUDIO OUT (Left/Right)
g
DIGITAL AUDIO OUT (OPTICAL)
h
AC IN connector
Connect the supplied power cord.
i
COMMON INTERFACE
Slot for external Conditional Access (CA)-
module and smart card used to decode
scrambled channels. This device works with CI
or CI+ CAM.
j
COMPONENT VIDEO OUT (Y P
B
P
R
)
Connecting
14
Connecting
2
Connections to Your
TV
Make one of the following connections, depending
on the capabilities of your existing equipment.
y
Satellite Antenna connection (page 14)
y
HDMI connection (page 14-15)
y
Component Video connection (page 17)
y
Composite connection (page 18)
y
Depending on your TV and other equipment
you wish to connect, there are various ways
you could connect the unit. Use only one of
the connections described in this manual.
y
Please refer to the manuals of your TV,
Stereo System or other devices as necessary
to make the best connections.
y
Make sure the player is connected directly
to the TV. Tune the TV to the correct video
input channel.
y
Do not connect the players AUDIO OUT jack
to the phono in jack (record player) of your
audio system.
y
Do not connect your player via your VCR.
The image could be distorted by the copy
protection system.
,
Note
Satellite Antenna connection
Connect the Satellite antenna to the RF ANTENNA
IN jack on the unit.
Rear of this unit
Satellite antenna
Rear of this unit
Satellite antenna
HDMI Connection
If you have a HDMI TV or monitor, you can connect
it to this unit using a HDMI cable (Type A, High
Speed HDMI™ Cable). Connect the HDMI jack on
the unit to the HDMI jack on a HDMI compatible TV
or monitor.
TV
Rear of this unit
TV
HDMI Cable
Set the TVs source to HDMI (refer to TVs Owners
manual).
Connecting
15
Connecting
2
y
If a connected HDMI device does not accept
the audio output of the unit, the HDMI
device’s audio sound may be distorted or
may not output.
y
When you use HDMI connection, you can
change the resolution for the HDMI output.
(Refer to “Resolution Setting” on page 18.)
y
Select the type of video output from the
HDMI OUT jack using [HDMI Color Setting]
option on the [Setup] menu (see page 33).
y
Changing the resolution when the
connection has already been established
may result in malfunctions. To solve the
problem, turn o the player and then turn it
on again.
y
When the HDMI connection with HDCP is
not veried, TV screen is changed to black
screen. In this case, check the the HDMI
connection, or disconnect the HDMI cable.
y
If there is noise or lines on the screen, please
check the HDMI cable (length is generally
limited to 4.5m).
,
Note
Additional Information for HDMI
y
When you connect a HDMI or DVI compatible
device make sure of the following:
-
Try switching o the HDMI/DVI device and
this player. Next, switch on the HDMI/DVI
device and leave it for around 30 seconds,
then switch on this player.
-
The connected device’s video input is set
correctly for this unit.
-
The connected device is compatible with
720x576p, 1280x720p, 1920x1080i or
1920x1080p video input.
y
Not all HDCP-compatible HDMI or DVI devices
will work with this player.
-
The picture will not be displayed properly
with non-HDCP device.
-
This player does not playback and TV screen
is changed to black screen.
Satellite Setting
Once you have completed setting the digital
receiver to your individual preferences, you can
proceed, if necessary, to adjust the unit settings
to your antenna. The menu [Satellite Setting]
contains the satellites that have been selected in
the installation assistant. If the installation assistant
was interrupted, the satellite position [Astra19.2E]
is pre-programmed. Should you wish to receive
other satellites, or if you are using a dierent type
of LNB, you can adjust your digital receiver to the
appropriate data as follows:.
Antenna Setting
1. Select [Satellite Setting] option in the [DTV]
menu, then press ENTER (
b
).
If the [DTV Lock] option is set to [Lock], this
function is available when you enter the
password correctly. (see page 30 .)
,
Note
2. The [Satellite Setting] menu appear on the
screen. Use
W/S
to select the [Antenna
Setting] and then press ENTER (
b
).
3. Use
A/D
to select a desired particular
satellite.
Connecting
16
Connecting
2
4. Select an item using
W/S
. If you know the
programmed [LNB Frequency], [22kHz Tone],
[DiSEqC], [LNB Power], [Transponder] and
[Motor], use
A/D
to select the desired.
If you select [DiSEqC 1.2], you can set Motor
Driving Mode, Motor Move and Set Limit,
and if you select [USALS], you can set the
longitude and latitude and use
S
to select
[Go to position]; then motor will move to your
selelected satellite as calculating its position.
If you use USALS, you should know lines of
longitude and latitude at your location.
,
Note
5. Use
W/S
to select the [Save] and press ENTER
(
b
) to display the [Saved List] menu.
If there isn’t LNB Frequency what you want in
[LNB Frequency], input LNB Frequency with
numerical buttons.
,
Note
6. Use
W/S/A/D
to select the [Go To Tuning]
and press ENTER (
b
).
7. Select [Start] and press ENTER (
b
) to begin the
channel search.
Use
W/S
to select a satellite check box and
press ENTER (
b
) to select or deselect it.
You can search All, FREE, CAS channels
individually. Press
W
, you can select Search Type
with
A/D
.
[All]
All channels the satellite searches.
[FREE]
Free of charge channels.
[CAS](Conditional Access System)
Pay channels.
Select [Stop] and press ENTER (
b
) to stop the
channel search.
8. Press ENTER ( ).
Please refer to the manuals of your TV, Stereo
System or other devices as necessary to make
the best connections.
,
Note
Auto Tuning
All available satellite TV or radio programmes are
searched.
1. Use
W/S
to select the [Auto Tuning] and
press ENTER (
b
).
2. Follow the steps 7-8 from Antenna Setting” on
page 15-16.
Connecting
17
Connecting
2
Manual Tuning
All available satellite TV or radio programmes are
searched.
1. Use
W/S
to select the [Manual Tuning] and
press ENTER (
b
).
2. Select an item using
W/S
and If you know
the programmed [Satellite], [Frequency],
[Polarization], [Symbol Rate], [Modulation],
[Network Search] and [Search Type], use
A/D
to select the desired, Fill the [Frequency] and
[Symbol Rate] field using numerical buttons.
3. Select [Start] and press ENTER (
b
) to begin the
channel search.
Select [Stop] and press ENTER (
b
) to stop the
channel search.
4. Press ENTER ( ).
y
Select [Stop] and press ENTER (
b
) to stop
the network search.
y
If you set this option to [On], the unit will
search available transponders through
network.
,
Note
Component Video Connection
Connect the COMPONENT VIDEO OUT jacks on
the unit to the corresponding input jacks on the
TV using Y P
B
P
R
cables. Connect the left and right
AUDIO OUT jacks of the unit to the audio left and
right IN jacks on the TV using the audio cables.
TV
Component
video Cable
Audio Cable
Rear of this unit
TV
When you use COMPONENT VIDEO OUT
connection, you can change the resolution for
the output. (Refer to “Resolution setting” on
page 18.)
,
Note
Connecting
18
Connecting
2
Composite connection
Connect the VIDEO OUT jack on the Recorder to
the video in jack on the TV using the video cable
supplied. Connect the Left and Right AUDIO OUT
jacks on the Recorder to the audio left/right in jacks
on the TV using the supplied audio cables.
TV
Video
Cable
Audio Cable
TV
Rear of this unit
Resolution Setting
The player provides several output resolutions for
HDMI OUT and COMPONENT VIDEO OUT jacks. You
can change the resolution using [Setup] menu.
1. Press HOME (
n
).
2. Use
A/D
to select the [Setup] and press ENTER
(
b
). The [Setup] menu appears.
3. Use
W/S
to select [DISPLAY] option then
press
D
to move to the second level.
4. Use
A/D
to select the [Resolution] option
then press ENTER (
b
) to move to the third level.
5. Use
W/S
to select the desired resolution then
press ENTER (
b
) to confirm your selection.
Connecting
19
Connecting
2
Connecting to an
Amplifier
Make one of the following connections, depending
on the capabilities of your existing equipment.
y
HDMI Audio connection (page 19)
y
Digital Audio connection (page 20)
y
2CH Analogue Audio connection (page 20)
Since many factors aect the type of audio output,
see Audio Output Specications” for details (pages
88-89).
About Digital Multi-channel sound
A digital multi-channel connection provides the
best sound quality. For this, you need a multi-
channel Audio/Video Receiver that supports one or
more of the audio formats supported by your unit.
Check the receiver manual and the logos on the
front of the receiver. (PCM Stereo, PCM Multi-Ch,
Dolby Digital, Dolby Digital Plus, Dolby TrueHD, DTS
and/or DTS-HD)
Connecting to an Amplifier via
HDMI Output
Connect the player’s HDMI OUT jack to the
corresponding in jack on your amplier using a
HDMI cable. You will need to activate the player’s
digital output. (See “[AUDIO] Menu on pages 34-
35.)
TV
Amplier/Receiver
Rear of this unit
TV
HDMI Cable
HDMI
Cable
Amplier/Receiver
Connect the ampliers HDMI output jack to HDMI
input jack on your TV using a HDMI cable if your
amplier has HDMI output jack.
Connecting
20
Connecting
2
Connecting to an Amplifier via
Digital Audio Output
Connect the player’s DIGITAL AUDIO OUT (OPTICAL)
jack to the corresponding in jack (OPTICAL) on your
amplier.
Use an optional digital (optical) audio cable. You
will need to activate the unit’s digital output. (See
“[AUDIO] Menu on pages 34-35.)
Amplier/Receiver
OPTICAL
Optical Cable
Rear of this unit
Amplier/Receiver
Connecting to an Amplifier via
2 Channel Audio Output
Connect the Left and Right 2CH AUDIO OUT jacks
on the unit to the audio left and right in jacks on
your amplier, receiver, or stereo system, using
audio cables.
Amplier/Receiver
Rear of this unit
Audio Cable
Amplier/Receiver
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94

LG HR929S User manual

Category
Blu-Ray players
Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI