Page is loading ...
www.lg.com
1/03FWb
TYPE : WALL MOUNTED
IMPORTANT
• Please read this instruction manual completely before
installing the product.
• When the power cord is damaged, replacement should be
performed by authorized personnel only.
• Installation work must be performed in accordance with
the national wiring standards by authorized personnel
only.
• Please retain this installation manual for future reference
after reading it thoroughly.
INSTALLATION MANUAL
AIR CONDITIONER
• Do not cool excessively indoors. This may be harmful for your health and may consume more
electricity.
• Block sunlight with blinds or curtains while you are operating the air conditioner.
• Keep doors or windows closed tightly while you are operating the air conditioner.
• Adjust the direction of the air flow vertically or horizontally to circulate indoor air.
• Speed up the fan to cool or warm indoor air quickly, in a short period of time.
• Open windows regularly for ventilation as the indoor air quality may deteriorate if the air condition-
er is used for many hours.
• Clean the air filter once every 2 weeks. Dust and impurities collected in the air filter may block the
air flow or weaken the cooling / dehumidifying functions.
For your records
Staple your receipt to this page in case you need it to prove the date of purchase or for warranty
purposes. Write the model number and the serial number here:
Model number :
Serial number :
You can find them on a label on the side of each unit.
Dealer’s name :
Date of purchase :
Here are some tips that will help you minimize the power consumption when you use the air
conditioner. You can use your air conditioner more efficiently by referring to the instructions
below:
TIPS FOR SAVING ENERGY
C Type: 494 C Type: 504
Place a level on raised tab
Unit Outline
83
C Type: 134
Measuring Tape
Ø65
83
Measuring Tape
Hanger
Ø65
C Type: 150
(Unit : mm)
(Unit : mm)
194152
Ø65
Right rear piping
Right rear piping
Left rear piping
Left rear piping
Ø65
C Type : 134C Type : 98
C Type
C Type : 418 C Type : 418
Place a level on raised tab
Unit Outline
Installation Plate
Bar
Copper pipe
Clamp handle
Red arrow mark
Cone
Yoke
Handle
Bar
"A"
Insert 3 or 4 hooks of the chassis cover into
gap of the chassis certainly.
Assembly of chassis cover (Decor)
• 5.0 kW
• 2.5/3.5 kW
• 6.6 kW
* The feature can be changed according a type of
model.
2.5 kW/3.5 kW
5.0 kW 6.6 kW
2.51.01.5
2.5/3.5/5.0/6.6 kW
1.0
2.5/3.5 kW 5.0 kW 6.6 kW
15 20 25
• 2.5/3.5 kW
• 5.0 kW
• 6.6 kW
18
* The feature can be changed according a type of
model.
/