Intellinet 408332 Quick Instruction Guide

408332
Intellinet
Brand
Intellinet
Model
408332
Type
Quick Instruction Guide

This manual is also suitable for

intellinet-network.com
Surface Mount Box
Quick Instruction Guide
Models 100601, 100632, 408301, 408394,
408332 and 408417
INT-100601-100632_408301-394-332-417_QiG_0316_Rev5.02
Follow the steps on this guide for easy, reliable
connections. Use for a variety of Intellinet Network
Solutions products: shielded (FTP) or unshielded (UTP);
Cat5e or Cat6; and 1-, 2- or 8-port versions.
Carefully strip away approximately 30 mm of the cable jacket(s) (left) to
be connected to the Box, separating the wires into four pairs. Use a wire
cutter to cut the wire holder (right) ush with the cable jacket.
Use a Krone punch-down tool to crimp each
pair of wires and connect them to their cor-
responding color-coded pairs.
Intellinet Network Solutions is a trademark of IC Intracom, registered in the U.S. and other countries.
Remove cover plate (left) from the box; then,
remove the inner cover (right) to reveal the
color-coded pins inside the unit.
Place the end of the cable jacket onto the cable clamp, so that
the wire pairs can easily be positioned as needed inside the box.
Using pliers, tighten the cable clamp
to secure the cable to the Box.
Re-attach the inner cover and
the cover plate. Insert the
nameplate components in
the cover plate slot above the
port(s).
T568A T568B
Pin 5 White/Blue Pin 5 White/Blue
Pin 4 Blue Pin 4 Blue
Pin 1 White/Green Pin 1 White/Orange
Pin 2 Green Pin 2 Orange
Pin 3 White/Orange Pin 3 White/Green
Pin 6 Orange Pin 6 Green
Pin 7 White/Brown Pin 7 White/Brown
Pin 8 Brown Pin 8 Brown
  • Page 1 1

Intellinet 408332 Quick Instruction Guide

408332
Intellinet
Brand
Intellinet
Model
408332
Type
Quick Instruction Guide
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents