Haier C6300 User manual

Brand: Haier

Model: C6300

Category: Mobile phones

Type: User manual

This manual is also suitable for

C5100

Statement

Reproduction, transfer, distribution or storage of part or all of the contents in this

document in any form without the prior written permission of Haier Telecom Co..,

Ltd.

The contents of this manual may be different with the cell phone, please read

according to the cell phone.

Haier Telecom reserves the right to revise this document or withdraw it

at any time without prior notice.

Co.., Ltd

Safety Precautions

Please read these simple guidelines. Following things may be dangerous or

illegal. For further information, see the section of “Warnings and Precautions”.

Do not switch the phone on when Mobile Phone use is prohibited or when

it may cause interference or danger.

Do not place your phone and its accessories in containers with strong

electromagnetic field.

Obey all local laws. Always keep your hands free to operate the vehicle

while driving. Your first consideration while driving should be road safety.

Hospitals or health care facilities may be using equipment that could be

sensitive to external radio frequency energy. Follow any regulations or

rules in force.

Do not use the phone at a refueling point. Do not use near fuel or chemicals.

Follow any restrictions. Wireless devices can cause interference in aircraft.

Keep the phone and all its parts, including accessories, out of the reach

of children.

Use only approved batteries and chargers. Disconnect the charger from

the power source when it is not in use. Do not leave the battery connected

to a charger for more than a week, since overcharging may shorten its life.

Only qualified personnel should service the phone or install the phone

in a vehicle. Faulty installation or service may be dangerous and may

invalidate any warranty applicable to the device.

Contents

.........................................................................1

..............................................................................................4

.............................................................................................5

......................................................................................................8

........................................................................................................9

....................................................................................................12

...................................................................................................15

............................................................................................................15

.......................................................................................................16

.......................................................................................................19

....................................................................................................19

.....................................................................................................20

...........................................................................................20

..............................................................................20

.....................................................................................22

1 Getting to Know Your Phone

2 Getting Started

3 Basic Functions

4 Text Entry

5 Contacts

6 Messages

7 Call history

8 Tools

9 Settings

10 Games

11 MTS info

12 My MTS

14 Care and Maintenance

15 Safety Information

My downloads

1Getting to Know Your Phone

Basic specification

Mobile phone appearance

Mobile phone view

Size: 98.7mm ×41.6mm ×13.4mm

Standby Time: about 115 hours

Talking Time: about 3 hours

Note:

Standby time is the handset continuous working time without making phone calls.

Standby time and talk time both depend on mobile phone usage situations,

network situations and environments.

The appearance of the mobile phone and introductions

Note:

Long press means pressing key more than or equal to 2 seconds; short press

means pressing key less than 2 seconds.

Icon bar

2Getting Started

Install and charge the phone

1. Remove the battery cover 2. Insert the RUIM card

3. Install the battery 4. Plug the travel adapter into the phone

3Basic Functions

Switching On/Off

Making phone call

Making phone call by dialing number

Send Key

End Key

Making phone call using contacts

Main

menu > Contacts

List Up/Down key

Send Key

Making phone call using last dialed number

Send Key

In the power off status, long press the Power Key to switch on the phone.

In the power on status, long press the Power Key to switch off the phone.

1. In the standby mode, enter the phone number you want to dial, and press the

to make the call.

2. To end the call, press the .

Note:

Can input P/T by multi-tap press [*] key, the number after P/T is extension

number.

1.In the standby mode, press <Contacts> or press <Menu> to access the

;

2.Select to view the contacts list, and press to choose one

contact, or select to search out the contact you want to call.

3.Press the to make the phone call.

1.In the standby mode, press the to display the last numbers dialed.

2.Select the number or name you want to redial, and press the .

In standby mode, press and hold one number key [1-9] to make phone call. See

chapter 5 for more information about setting speed dial.

Conference call depends upon the network services that allow taking part in a

conference call with other participants.

1.Make a call to the first participant.

2.Enter another number of the second participant; or get the number from your

Contacts.

3.Press the , the first participant will be on hold.

4.When the second participant picks up, press the number 3 key and then press

the to connect the call. Conference call will start.

5.To end the conference call, press the .

Note:

The conference call services depend upon local network provider. Please

confirm and contact network provider firstly.

1.To answer the call, press the or select <Answer>.

Send Key

Making phone call using speed dial

Making a conference call

Send Key

End Key

Answering the call

Answer or silence an incoming call

Send Key

Press <Silence> to mute the ringing tone before you answer the call.

2.To reject the call, press the or select <Ignore>.

Press the navigation key of your phone to adjust the volume of the receiver

during a call.

While adjusting the volume, a bar chart appears in the display indicating the

volume level.

To answer a call while the keypad is locked, press the .

During the call, the option menu can still be used. When you end or reject the

call, the keypad automatically re-locks.

During a call press and you can choose one of the following options:

To prevent the keys from being accidentally pressed, you can lock the keypad.

When the keypad is locked, only emergency numbers can be dialed.

Press and hold [*] key for more than 2 seconds to unlock the keypad.

End Key

Adjust the receiver volume

Answer a call with the keypad locked

Send Key

Operations during a call

Messages, Contacts, Mute on and off, Phone info.

Keypad lock

4Text Entry

Text input method

Change the input method

Your phone provides following text input methods:

English input method: input English characters;

Numeric input method: input numeric characters;

Long press [*] to enter symbol list;

Press [*] to switch between Upper case and Lower case mode;

Press [#] to switch among Predictive, Multi-tap and Numeric mode.

Note:

Press [1] to insert common symbol under the Predictive mode or Multi-tap mode.

You can store names and phone numbers (contacts) in the phone and the RUIM

card memory.

1.Displays all the contacts.

2.In the standby mode, press <Menu> to access the

;

3.While you are editing name, press <Options> and one of the following options:

(Number in phone)

(Number in card)

While you edit number, press <Options> and one of the following options:

(Number in phone)

(Number in card)

1.In the standby mode, press <Menu> to access the

;

5 Contacts

List

Main menu > Contacts >

List

Add detail, Edit name, Add to group, Erase contact.

Edit name, Erase contact.

Number type, Edit, Erase, Save to RUIM, Add to speed

dial, Send message.

Edit, Add to speed dial, Save to phone, Send message.

Add new

Main menu > Contacts >

Add new

2.Add contacts ( ) details as follow:

3.Press <Options> and choose one of the following:

4. Add contacts ( ) details as following:

5. Press <Options> and one of the following:

1.In the standby mode, press <Menu> to access the

;

2.Press left soft key to search a contact you want: By name. If you input the

wrong name, the phone will inform you “No contacts found”.

1. In the standby mode, press <Menu> to access the

;

2. The Multicopy includes Copy RUIM to phone, Copy phone to RUIM. Press

<Select> to operate the below options:

: Copy all the contacts between phone memory and RUIM card memory.

: Copy the contacts you want between phone memory and RUIM

card memory.

1. In the standby mode, press <Menu> to access the

Add to Phone Name, Office, Home, Mobile

1, Mobile 2,Other, Email, Address, URL, Notes.

Edit, Save.

Add to RUIM Name, Number.

Edit, Save.

Main menu > Contacts >

Multicopy

Main menu > Contacts

>Multicopy

Copy all

Copy select

Groups

Main menu > Contacts >

Groups

View: Set group ringtone

Rename group

Erase all

Main menu > Contacts >

Erase all

Speed dial

Main menu > Contacts >

Speed dial;

Set entry Erase Erase all

;

2. Select one group and press <Options> to operate the options given below:

View the members of the group. : Set special ring to

the group. : Edit the group's name (RUIM and Default can not be

renamed).

Note:

If the group ringer is not set, the default call ringer will play when there is an

incoming call except in Silence or Vibration.

After you input correct phone security code to enter this menu.

1.In the standby mode, press <Menu> to access the

(When you select Erase all, you have to input security code before

deleting all records, the default security code is 0000);

Use this menu to assign a speed dial number (1 to 9 items).

In Idle mode, press and hold one number key to dial the speed dial entry.

1.In the standby mode, press <Menu> to access the

2.Select one empty entry, and set the number you want to dial, press <Options>

> and select , or .

Enter the number, and press <Save>; or press <Search> to retrieve a number

from your Contacts.

Check the number of contacts you have stored in the phone memory or the

RUIM card.

Your phone is capable of creating, sending and receiving text messages.

1.In the standby mode, press <Menu> to access the

;

2.Enter your message.

3.Press <Options> and select .

4.To send the message to more than one recipient, press <Options> and select

5.Press the <Select>to send the message.Using options while writing SMS

messagesWhile composing a message, press <Options> to access the following

options:

Memory status

Write and send SMS messages

Main menu > Messages >

Write message

Send

send to many.

Send, Insert templates, Send to many, Insert number, Save,

Message settings.

6 Messages

Inbox

Main menu > Messages >

Inbox

Reply, Forward, Save number, Erase, Copy to Phone/RUIM, Move to Spam.

Outbox

Main menu > Messages >

Outbox

Forward, Save number, Erase, Copy to Phone/RUIM.

Draft

Main menu > Messages >

Draft

Edit, Erase.

Voicemail

Spam

Main menu > Messages >

1.In the standby mode, press <Menu> to access the

;

2.While viewing a message, press <Options> to access the following options:

1.In the standby mode, press <Menu> to access the

;

2.While viewing a message, press <Options> to access the following options:

1.In the standby mode, press <Menu> to access the

;

2.Press <Options> to access the following options:

The voice mailbox is a network service and you may need to subscribe to it. For

more information and for your voice mailbox number, contact your service

provider.

1 In the standby mode, press <Menu> to access the

Spam

Erase, Move to inbox.

Templates

Main menu > Messages >

Templates

Erase messages

Main menu > Messages

>Erase messages Inbox, Outbox, Draft,

Spam, Erase all read messages, Erase all.

Message settings

Main menu > Messages >

Message settings Auto save, Auto delete,

Priority, Delivery reports, Storage location, Validity period, SMS on call

reject, Edit voice mailbox.

Memory status

;

2. Press <Options> to access the following options:

1.In the standby mode, press <Menu> to access the

;

2.Select the template message you want to use.

3.Press <Options> to

In the standby mode, press <Menu> to access the

and one of the following options:

In the standby mode, press <Menu> to access the

and one of the following options:

View the amount of memory currently in use for messages.

Edit, Send, Erase and Add new.

7 Call history

8 Tools

Call history stores information about the last missed, received, or dialled calls. It

also adds the total duration of all calls. When the number of calls exceeds the

maximum, the most recent call replaces the oldest.

Your phone contains features to help organize your life, including Alarm clock,

Scheduler, Calculator, Stopwatch and so on.

Use this menu to set alarms. The alert type for a normal alarm corresponds to

the call alert type settings.

Use this menu to enable you to keep track of reminders. It can even sound like

an alarm for any of these events.

Use this menu to perform basic arithmetic functions, such as addition,

subtraction, multiplication, and division.

Use this menu to calculate the tip you need to pay.

Alarm clock

Scheduler

Calculator

Tip calculator

Stopwatch

Main menu Tools

Stopwatch

World Clock

Ringer

Main menu >Settings

>Ringer,

Display

Banner:

Language

Backlight duration

In the standby mode, press <Menu> to access the > >

;

Use this menu to set your local city time. It can show time of different cities.

The settings menu provides you with various setting options to customize the

phone to your preferences and needs. You can also reset the settings to their

default status.

In the standby mode, press <Menu> to access the

you can set the different profiles as per your requirement.

Use this menu to choose whether the display shows a customized

banner under the operation logo, when the phone is in the standby mode.

You can select language as per your requirement.

You can control the time-out of the backlight on your

phone.

9 Settings

Page is loading ...

Haier C6300 User manual

Brand: Haier

Model: C6300

Category: Mobile phones

Type: User manual

This manual is also suitable for

C5100

Download PDF

report

Haier C6300 User manual

This manual is also suitable for

Haier C6300 User manual

Related papers

Other documents