Lexmark 544n - X Color Laser Supplementary Manual

Brand: Lexmark

Model: 544n - X Color Laser

Type: Supplementary Manual

This manual is also suitable for

Print defects guide

Page 1 of 1

Replace the

photoconductor.

Note: If the defect appears on the printed

side of a single-sided print job, replace the

toner cartridge before replacing the fuser.

Replace the

fuser.

Match a set of repeating defects on a print job to the marks on one of the vertical lines. The line that best

matches the defects on the print job indicates which particular part may be causing the defect.

For example, the distance between these two

marks represents a repeating defect that

occurs every 34.6 mm (1.4 in.), which means

the photoconductor unit may need to be

replaced.

95 mm

(3.74 in.)

Replace the

developer.

43.9 mm

(1.7 in.)

55 mm

(2.2 in.)

Replace the

image unit kit.

34.6 mm

(1.4 in.)

Replace the

photoconductor.

94.2 mm

(3.71 in.)

37.7 mm

(1.5 in.)

78.5 mm

(3.1 in.)

Replace the

image unit kit.

Replace the

image unit kit.

Lexmark 544n - X Color Laser Supplementary Manual

Brand: Lexmark

Model: 544n - X Color Laser

Type: Supplementary Manual

This manual is also suitable for

Download PDF

report

Lexmark 544n - X Color Laser Supplementary Manual

This manual is also suitable for

Lexmark 544n - X Color Laser Supplementary Manual

Related papers

Other documents