Greenlee BC, HDBC, HDFBC Series Bolt Cutters User manual

Type
User manual

This manual is also suitable for

Greenlee BC, HDBC, HDFBC Series Bolt Cutters Manual provides guidelines and safety instructions for the operation and maintenance of a bolt cutter tool. According to the manual, this tool is designed for cutting bolts and should not exceed its rated capacity. It is intended for two-handed operation and should not be used with handle extensions. The manual emphasizes the importance of wearing eye protection while using the tool to prevent eye injuries from flying debris.

Greenlee BC, HDBC, HDFBC Series Bolt Cutters Manual provides guidelines and safety instructions for the operation and maintenance of a bolt cutter tool. According to the manual, this tool is designed for cutting bolts and should not exceed its rated capacity. It is intended for two-handed operation and should not be used with handle extensions. The manual emphasizes the importance of wearing eye protection while using the tool to prevent eye injuries from flying debris.

999 2799.3 © 2019 Greenlee Tools, Inc. IM 1352 REV 3 11/19
Bolt Cutters
INSTRUCTION SHEET
Read and understand all of the instructions and
safety information in this manual before operating
or servicing this tool.
Greenlee Tools, Inc. 4455 Boeing Dr., Rockford, IL 61109-2988 815/397-7070
2
Jaw Adjustment
1. Loosen lock nut on adjusting bolt.
2. Align cutter jaws by rotating adjusting bolt.
Tighten adjusting bolt to close jaws.
3. Tighten lock nut securely after adjustment completed.
Electric shock hazard:
This is not an insulated tool.
Contact with live circuits could result
in severe injury or death.
Wear eye protection when using this
tool.
Failure to wear eye protection could
result in serious eye injury from
flying debris.
Do not exceed the rated capacity of this tool.
This tool is designed for two-handed operation.
Maintain a firm grip on both handles during
operation.
Do not use handle extensions (cheaters).
Failure to observe these precautions may result in
injury or property damage.
1
2
5
4
6
3
14" 18" 24" 30" 36" 42" 24" 30" 36" 42" 18" 24" 30" 36"
Cat. / UPC No.
BC14 BC18 BC24 BC30 BC36 BC42 HDBC24 HDBC30 HDBC36 HDBC42 HDFBC18 HDFBC24 HDFBC30 HDFBC36
Length 14" 18" 24" 30" 36" 42" 24" 30" 36" 42" 18" 24" 30" 36"
Head Color Black Black Black Black Black Black Red Red Red Red Red Red Red Red
Weight (lb) 2.4 3.4 5.8 8.9 13.3 19.8 5.8 8.9 13.3 19.8 4.2 6.2 9.0 14.0
Cap @ Rb 85 Dia. 1/4" 5/16" 3/8" 1/2" 5/8" 3/4" 3/8" 1/2" 5/8" 3/4" 5/16" 3/8" 1/2" 5/8"
Cap @ Rc 40 Dia. 3/16" 1/4" 5/16" 11/32" 3/8" 7/16"
Cap @ Rc 48 Dia. 9/32" 5/16" 11/32" 3/8" 7/32" 9/32" 5/16" 11/32"
1 Blade Unit w/bolts 11281 11301 11306 11316 11321 11335 11342 11344 11346 11348 11367 11342 11344 11346
2 Adjustment Assembly 11282 11302 11307 11317 11322 11336 11307 11317 11322 11336 11368 11307 11317 11322
3 Left Handle w/bolts 11283 11303 11308 11318 11323 11337 11308 11318 11323 11337 11369 11375 11378 11383
4 Right Handle w/bolts 11284 11304 11309 11319 11324 11338 11309 11319 11324 11338 11370 11376 11379 11384
5 ID Decal 11285 11305 11310 11320 11325 11339 11343 11345 11347 11349 11371 11377 11380 11385
6 Jaw Adjustment Decal 05484 05484 05484 05484 05484 05484 05484 05484 05484 05484 05484 05484 05484 05484
Parts List
STANDARD DUTY HEAVY DUTY
HEAVY DUTY
FIBERGLASS HANDLE
NOT RATED
NOT RATED NOT RATED
  • Page 1 1
  • Page 2 2

Greenlee BC, HDBC, HDFBC Series Bolt Cutters User manual

Type
User manual
This manual is also suitable for

Greenlee BC, HDBC, HDFBC Series Bolt Cutters Manual provides guidelines and safety instructions for the operation and maintenance of a bolt cutter tool. According to the manual, this tool is designed for cutting bolts and should not exceed its rated capacity. It is intended for two-handed operation and should not be used with handle extensions. The manual emphasizes the importance of wearing eye protection while using the tool to prevent eye injuries from flying debris.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI