Assembly Instructions
Thread one ½-13 Hex Nut (B) part way down Leg Leveler (A)
to desired height. Follow nut with one ½” Flat Washer (C).
Insert assembly into hole in leg. Place one ½” Flat Washer (C)
onto Leg Leveler (A). Thread one ½-13 Hex Nut onto leg leveler
and tighten both Hex Nuts against each other.
Repeat for remaining legs.
A
B
C
C
B
Manufactured by Brennan Equipment and Mfg, Inc 730 Central Ave University Park, IL 60484