Intermec 2100 Connecting

Intermec
Brand
Intermec
Model
2100
Type
Connecting

This manual is also suitable for

Intermec 2100 is a fiber optic access point that allows you to connect your devices to a fiber optic network. It is compatible with MT-RJ, SC, and ST networks, and can be used to connect to a variety of devices, including computers, printers, and other network devices. The Intermec 2100 is a versatile and reliable access point that can be used in a variety of applications. Here are some of the benefits of using the Intermec 2100:

  • High speed: The Intermec 2100 supports data transfer rates of up to 100 Mbps, making it ideal for high-speed applications such as streaming video and data transfer.

Intermec 2100 is a fiber optic access point that allows you to connect your devices to a fiber optic network. It is compatible with MT-RJ, SC, and ST networks, and can be used to connect to a variety of devices, including computers, printers, and other network devices. The Intermec 2100 is a versatile and reliable access point that can be used in a variety of applications. Here are some of the benefits of using the Intermec 2100:

  • High speed: The Intermec 2100 supports data transfer rates of up to 100 Mbps, making it ideal for high-speed applications such as streaming video and data transfer.
Connecting To an SC Network
To connect to an SC network, you need the following:
•
Patch cord for connecting the MT-RJ transceiver to the SC adapter
•
Adapter for connecting an SC cord to an SC network
1. Remove any cable protectors attached to the patch cord and adapter.
2. Connect the access point to your network as shown in the next illustrations.
SC connector
To access
point
SC connector
To SC
networ
k
SC adapter
FOI005.eps
FOI002.eps
SC connector
To
access
point
To
SC networ
k
To
SC network
SC adapter
SC connector
Connecting To an ST Network
To connect to an ST network, you need the following:
•
Patch cord for connecting the MT-RJ transceiver to the ST adapter
•
Adapter for connecting an ST cord to an ST network
1. Remove any cable protectors attached to the patch cord and adapter.
2. Connect the access point to your network as shown in the next illustration.
FOI001.eps
ST connector
ST adapter
ST connector
To
access
point
To
ST network
To
ST network
Enabling Fiber Optic
After you have connected the access point to your fiber optic network, you must
enable fiber optic on the access point.
1. Point your Web browser to your access point’s IP address. The access point
Web interface opens.
2. Click Ethernet from the AP Configuration menu. The Ethernet screen appears.
3. Click Port Type and choose 100 Mb Fiber Optic.
4. Click Submit Changes and follow the instructions that appear on your screen.
5. You must reboot the access point to enable your changes. Click Save/Discard
changes and follow the instructions that appear on your screen to reboot the
access point.
*072226-001*
*072226-001*
6001 36th Avenue West
P.O. Box 4280
Everett, WA 98203-9280
© 2001 Intermec Technologies Corp.
All Rights Reserved
Connecting Fiber Optic Access Points
To connect your fiber optic 2100 or 2101 access point to your network, you
must have a patch cord and an adapter. Patch cords and adapters are available
from many different manufacturers. Contact your Intermec representative for
help choosing the proper cord and adapter.
Using adapters and patch cords, you can connect your MT-RJ access point to
•
an MT-RJ network.
•
a square connector (SC) network.
•
a straight tip (ST) network.
Note: All cables must be multimode, 62.5/125 µm.
Connecting To an MT-RJ Network
To connect to an MT-RJ network, you need the following:
•
Patch cord for connecting the MT-RJ transceiver to the MT-RJ adapter
•
Adapter for connecting an MT-RJ cord to an MT-RJ network
1. Remove any cable protectors attached to the patch cord and adapter.
2. Connect the access point to your network as shown in the next illustration.
FOI006.eps
MT-RJ connector
To
access
point
MT-RJ adapter
To
MT-RJ
networ
k
  • Page 1 1
  • Page 2 2

Intermec 2100 Connecting

Intermec
Brand
Intermec
Model
2100
Type
Connecting
This manual is also suitable for

Intermec 2100 is a fiber optic access point that allows you to connect your devices to a fiber optic network. It is compatible with MT-RJ, SC, and ST networks, and can be used to connect to a variety of devices, including computers, printers, and other network devices. The Intermec 2100 is a versatile and reliable access point that can be used in a variety of applications. Here are some of the benefits of using the Intermec 2100:

  • High speed: The Intermec 2100 supports data transfer rates of up to 100 Mbps, making it ideal for high-speed applications such as streaming video and data transfer.
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents