Silvercrest SMA 500 A1 Operating Instructions Manual

Brand: Silvercrest

Model: SMA 500 A1

Type: Operating Instructions Manual

Silvercrest SMA 500 A1: Enjoy exceptional audio quality with our portable mini speaker, featuring wireless Bluetooth connectivity for seamless music streaming from smartphones, tablets, and other Bluetooth-enabled devices. Experience enhanced bass with the dedicated bass boost function, and connect non-Bluetooth devices via the AUX-IN port. Its compact design makes it perfect for personal use, while the long battery life ensures hours of uninterrupted music enjoyment.

MINI SPEAKER SMA 500 A1

MINIGŁOŚNIK

Instrukcja obsługi

IAN 273543

MINI SPEAKER

Operating instructions

MINI-LAUTSPRECHER

Bedienungsanleitung

GB / IE Operating instructions Page 1

PL Instrukcja obsługi Strona 19

DE / AT / CH Bedienungsanleitung Seite 37

Before reading, unfold the page containing the illustrations and

familiarise yourself with all functions of the device.

Przed przeczytaniem proszę rozłożyć stronę z ilustracjami, a następ-

nie proszę zapoznać się z wszystkimi funkcjami urządzenia.

Klappen Sie vor dem Lesen die Seite mit den Abbildungen aus und

machen Sie sich anschließend mit allen Funktionen des Gerätes

vertraut.

SMA 500 A1

Table of contents

Introduction ......2

Information concerning

these operating

instructions ..........2

Limitation of liability . . . 2

Warnings ...........3

Intended use .........4

Safety ........... 4

Basic safety instructions 4

Initial operation . . . 7

Check the items supplied 7

Disposal of packaging . 8

Requirements for the setup

location .............8

Controls .........9

Handling and use . 9

Charging the battery . . 9

Speaker operation . . . 10

Aux-In operation .....11

Fault rectiﬁcation . 12

Malfunction causes and

remedies ...........12

Cleaning ........13

Storage/Disposal 13

Storage when not in use 13

Disposal of the device 14

Appendix .......15

Technical details .....15

Notes on the EU-Declara-

tion of Conformity ....15

Warranty ..........16

Service ............17

Importer ...........17

SMA 500 A1

Introduction

Information concerning these operating

instructions

Congratulations on the purchase of your new device.

You have decided to purchase a high-quality product. The

operating instructions are a constituent of this product. They

contain important information with regard to safety, use and

disposal. Before using the product, familiarise yourself with

all operating and safety instructions. Use this device only as

described and only for the speciﬁed areas of application.

Retain these instructions for future reference. Please also

pass these operating instructions on to any future owner(s).

This documentation is subject to copyright protection.

Any copying or reproduction of it, including as extracts,

as well as the reproduction of images, also in an altered

state, is only permitted with the written authorisation of the

manufacturer.

Limitation of liability

All technical information, data and information for installa-

tion, connection and operation contained in these operating

instructions correspond to the latest version at time of print-

ing and, to the best of our knowledge, take into account our

previous experience and know-how. No claims can be de-

rived from the details, illustrations and descriptions in these

SMA 500 A1

instructions. The manufacturer assumes no responsibility for

damage caused by failure to observe these instructions,

improper use, incompetent repairs, making unauthorised

modiﬁcations or for using unapproved replacement parts.

Warnings

The following warnings are used in these operating instructions:

DANGER

A warning at this risk level indicates an

imminently hazardous situation.

If the hazardous situation is not avoided, it could lead

to death or serious physical injury.

► Follow the instructions in this warning to avoid a

fatality or serious personal injury.

CAUTION

A warning of this risk level indicates potential

damage to property.

Failure to avoid this situation could result in damage to

property.

► Follow the instructions in this warning to prevent dam-

age to property.

SMA 500 A1

NOTE

► A note indicates additional information that will assist

you in handling the device.

Intended use

This mini-speaker is a consumer electronics device intended

exclusively for audio playback from mobile devices, such as

MP3 players, mobile telephones, etc., via a 3.5 mm jack

connection. This device is exclusively intended for non-com-

mercial use. The device is not intended for any other use or

for uses extending beyond those stated. Claims of any kind

for damage arising as a result of non-intended use will not

be accepted. The user is the sole bearer of the risk.

Safety

This section provides you with important safety information

regarding the handling of the device. The device complies

with the statutory safety regulations. Incorrect usage can

lead to personal injury and property damage.

Basic safety instructions

For safe handling of the device, follow the safety information

below:

■ Before use, check the device for visible external damage.

Do not use a device that has been damaged or dropped.

SMA 500 A1

■ Damaged cables or connections should be replaced by

the Customer Service department.

■ This device is not intended for use by persons (including

children) with limited physical, physiological or intel-

lectual abilities or lack of experience and/or knowledge

unless they are supervised by a person who is responsi-

ble for their safety, or receive instructions from this person

on how to use the device. Children should be supervised

to ensure that they do not play with the device.

■ DANGER! Do not allow children to play with the

packaging material! Keep all packaging materials away

from children. Risk of suﬀocation!

■ Always have repairs carried out by authorised special-

ist companies or the Customer Service department.

Improper repairs can pose signiﬁcant risks to the user.

Warranty claims also become void.

■ Repairs to the device during the warranty period may only

be carried out by a customer service department author-

ised by the manufacturer. Otherwise no additional war-

ranty claims can be considered for subsequent damage.

■ Do not make any unauthorised modiﬁcations or altera-

tions to the device.

■ Never open the housing. There are no user-serviceable

or swappable components inside the device.

■ Do not operate the device close to naked ﬂames (e.g.

candles).

SMA 500 A1

■ Do not place the device in locations that are subject to

direct sunlight as this could lead to overheating and

cause irreparable damage.

■ Protect the device from moisture and liquid penetration.

Never submerge the device in water and do not place

objects ﬁlled with liquids (such as vases) on the device.

■ If you see smoke or smell burning, unplug all connectors

immediately and switch oﬀ the device. Have the device

checked by a qualiﬁed specialist, before using it again.

DANGER

Erroneous handling of the battery can lead

to ﬁre, explosions, leakage of hazardous

substances or other dangerous situations!

► Do not throw the device into ﬁre, since the integrated

battery may explode.

SMA 500 A1

Initial operation

Check the items supplied

This device is supplied with the following components as

standard:

Mini speaker

Charging cable (USB* to Mini USB)

This operating manual (Symbol image)

* USB is a registered trademark of USB Implementers

Forum, Inc.

NOTE

► Check the contents for completeness and for signs

of visible damage.

► If the contents are incomplete or damaged due to

defective packaging or through transportation, con-

tact the Service Hotline (see chapter Service).

SMA 500 A1

Disposal of packaging

The packaging protects the device from transport damage.

The packaging materials have been selected in accordance

with their environmental friendliness and disposal attributes,

and are therefore recyclable.

The recirculation of packaging into the material

circuit saves on raw material and reduces the

amount of waste generated. Dispose of

packaging material that is no longer needed in

accordance with applicable local regulations.

Requirements for the setup location

For safe and trouble-free operation of the device, the setup

location must fulﬁl the following requirements:

■ The device must be placed on a ﬁrm, ﬂat and level surface.

■ Do not place the device in a hot, wet or extremely moist

environment or close to ﬂammable materials.

■ Set up the device so that it is not exposed to direct sun-

light or strong artiﬁcial light.

SMA 500 A1

Controls

Speaker

Connection socket AUX-IN (3.5 mm jack socket)

Operating and charging LED

On/Oﬀ switch (POWER ON / OFF)

Volume control (VOL + / –)

BASS switch (ON / OFF)

Mini USB connection socket (POWER INPUT)

Speaker cable with 3.5 mm jackplug

Charging cable (USB to Mini USB)

Handling and use

This section provides you with important information on

handling and using the device.

Charging the battery

The integrated battery must be fully charged before using

the device.

♦ Ensure that the On/Oﬀ switch

is in the OFF position.

♦ Connect the USB connector of the charging cable

to a PC or a USB power supply.

♦ Connect the Mini USB connector of the charging

cable

to the POWER INPUT connection socket

of the device. The operating LED

illuminates in red

and the battery is charged.

SMA 500 A1

NOTE

► The operating LED

illuminates in red during the

charging procedure and in blue after the battery has

been fully charged.

► The maximum charging time is about 4 hours, and

allows music to be played for up to 8 hours at a

volume level of 50%.

► As soon as the operating LED

illuminates in red,

the battery is empty and requires charging.

Speaker operation

♦ Completely unwind the speaker cable

from the

cable storage (underside of device).

♦ Connect the 3.5 mm jackplug of the speaker cable

to your playback device.

♦ Switch the speaker on by moving the On/Oﬀ

switch

to the ON position. The operating

LED

illuminates in blue.

♦ Switch on your player and select the required volume

using the volume control

♦ To obtain a rich bass tone, move the BASS switch

to the ON position.

♦ To switch the speaker oﬀ again, move the On/Oﬀ

switch

to the OFF position. The operating LED

goes out.

SMA 500 A1

Aux-In operation

Many electronic entertainment devices are equipped with

a 3.5 mm jack socket. If your player has a connector that

diﬀers from the audio output socket, use a suitable adapter if

necessary, or connect it to the AUX-IN

connection socket

using an adapter cable. The relevant adapter/adapter

cable is available from specialist dealers.

NOTE

► If you have connected playback devices to the AUX-

IN connection socket

and the speaker cable

at the same time, only the sound from the AUX-IN

connection socket

will be played.

SMA 500 A1

Fault rectiﬁcation

This section contains important information on fault localisa-

tion and rectiﬁcation. Observe the instructions in order to

avoid risks and damage.

Malfunction causes and remedies

The following table will help with localising and remedying

minor malfunctions:

Defect Possible cause Rectiﬁcation

No sound.

The volume control

of the player or the

speaker is set to mini-

mum volume.

Turn the volume up on

the playback device

or the speaker.

Playback device or

speaker not switched on.

Ensure that all devices

are switched on.

The 3.5 mm jackplug

is not fully inserted

into the socket of the

playback device

Push the 3.5 mm

jackplug completely

into the

socket.

The battery of the

speaker is discharged

(operating LED

illuminated in red or oﬀ).

Charge the battery

with the charging

cable

(see also

chapter Charging

the battery).

SMA 500 A1

NOTE

► If the aforementioned solutions do not resolve the

problem, please contact the Customer Service

(see chapter Service).

Cleaning

CAUTION

Possible damage to the device

► To avoid irreparable damage, ensure that no mois-

ture enters the device during cleaning.

■ Clean the housing of the device only with a lightly mois-

tened cloth and a mild detergent.

Storage/Disposal

Storage when not in use

■ Switch oﬀ the speaker by moving the On/Oﬀ switch

to the OFF position.

■ Wind the speaker cable

clockwise onto the cable

storage and clip the 3.5 mm jackplug into the recess.

■ Store the device in a dry environment.

■ Charge the integrated battery from time to time to main-

tain performance.

SMA 500 A1

Disposal of the device

The adjacent symbol of a crossed-out wheelie

bin means that this device is subject to Directive

2012/19/EU. This directive states that this

device may not be disposed of in normal

household waste at the end of its usable life, but must be

handed over to specially set-up collection locations,

recycling depots or disposal companies.

This disposal is free of charge for the user.

Protect the environment and dispose of this

device properly.

You can obtain further information from your local disposal

company or the city or local authority.

SMA 500 A1

Appendix

Technical details

Output power

1.5 W RMS with 10 %

harmonic distortion

Frequency range 450 Hz - 15 kHz

Integrated battery

3.7 V / 500 mAh

(Lithium polymer)

Operating temperature +5 - +35°C

Storage temperature 0 - +35°C

Humidity (no condensation) 10 - 80 %

Dimensions (Ø x H) approx. 7.5 x 4.6 cm

Weight (with accessories) approx. 115 g

Notes on the EU-Declaration of Conformity

With regard to conformity with the basic

requirements and other relevant provisions,

this device complies with the Electromagnetic

Compatibility Directive 2004/108/EC and

the RoHS Directive 2011/65/EU.

The full EU-Declaration of Conformity is

available from the importer.

SMA 500 A1

Warranty

The warranty for this appliance is for 3 years from the date

of purchase. The appliance has been manufactured with

care and meticulously examined before delivery.

Please retain your receipt as proof of purchase. In the case

of a warranty claim, please make contact by telephone with

our Customer Service Department. Only in this way can a

post-free despatch for your goods be assured.

NOTE

► The warranty covers only claims for material and

manufacturing defects, but not for transport damage,

wearing parts or for damage to fragile components,

e.g. buttons or batteries.

This product is for domestic use only and is not intended for

commercial use. The warranty is void in the case of abusive

and improper handling, use of force and internal tampering

not carried out by our authorised service branch.

Your statutory rights are not restricted in any way by this

warranty. The warranty period is not extended by repairs

made under the warranty. This applies also to replaced and

repaired parts.

Damages and defects extant at the time of purchase must

be reported immediately after unpacking, resp. no later than

two days after the date of purchase.

Repairs made after the lapse of the warranty period are

subject to charge.

SMA 500 A1

Service

Service Great Britain

Tel.: 0871 5000 720 (£ 0.10/Min.)

E-Mail: k[email protected]

IAN 273543

Service Ireland

Tel.: 1890 930 034

(0,08 EUR/Min., (peak))

(0,06 EUR/Min., (oﬀ peak))

E-Mail: k[email protected]

IAN 273543

Hotline availability: Monday to Friday 08:00 - 20:00 (CET)

Importer

KOMPERNASS HANDELS GMBH

BURGSTRASSE 21

44867 BOCHUM

GERMANY

www.kompernass.com

Page is loading ...

Silvercrest SMA 500 A1 Operating Instructions Manual

Brand: Silvercrest

Model: SMA 500 A1

Type: Operating Instructions Manual

Download PDF

report

in other languages

Deutsch: Silvercrest SMA 500 A1
polski: Silvercrest SMA 500 A1

Silvercrest SMA 500 A1 Operating Instructions Manual

Silvercrest SMA 500 A1 Operating Instructions Manual

in other languages

Related papers

Other documents