H3C s5820x series Oaa Command Reference

Brand: H3C

Model: s5820x series

Type: Oaa Command Reference

This manual is also suitable for

s5800 series

H3C s5820x series is a powerful and versatile switch that offers a wide range of features and capabilities to meet the needs of demanding business networks. With its high-performance hardware, advanced software features, and flexible configuration options, the s5820x series is ideal for a variety of applications, including:

Enterprise campus networks: The s5820x series can serve as a core or distribution switch in a large enterprise campus network. It provides high-speed connectivity for data, voice, and video traffic, and it supports a variety of Layer 2 and Layer 3 switching features.

Enterprise campus networks: The s5820x series can serve as a core or distribution switch in a large enterprise campus network. It provides high-speed connectivity for data, voice, and video traffic, and it supports a variety of Layer 2 and Layer 3 switching features.

H3C S5820X&S5800 Switch Series

OAA Command Reference

Hangzhou H3C Technologies Co., Ltd.

http://www.h3c.com

Software version: Release 1211

Document version: 6W100-20110415

No part of this manual may be reproduced or transmitted in any form or by any means without prior

written consent of Hangzhou H3C Technologies Co., Ltd.

Trademarks

H3C,

, Aolynk, , H

Care,

, TOP G, , IRF, NetPilot, Neocean, NeoVTL,

SecPro, SecPoint, SecEngine, SecPath, Comware, Secware, Storware, NQA, VVG, V

G, V

G, PSPT,

XGbus, N-Bus, TiGem, InnoVision and HUASAN are trademarks of Hangzhou H3C Technologies Co.,

Ltd.

All other trademarks that may be mentioned in this manual are the property of their respective owners

Notice

The information in this document is subject to change without notice. Every effort has been made in the

preparation of this document to ensure accuracy of the contents, but all statements, information, and

recommendations in this document do not constitute the warranty of any kind, express or implied.

Preface

The H3C S5800&S5820X documentation set includes 12 command references, which describe the

commands and command syntax options for the S5800&S5820X Release1211.

The OAA Command Reference describes OAA configuration commands.

This preface includes:

•

Audience

•

Added and modified commands

•

Conventions

•

About the H3C S5800&S5820X documentation set

•

Obtaining documentation

•

Technical support

•

Documentation feedback

Audience

This documentation is intended for:

• Network planners

• Field technical support and servicing engineers

• Network administrators working with the S5800 and S5820X switch series

Added and modified commands

None

Conventions

This section describes the conventions used in this documentation set.

Command conventions

Convention Description

Boldface Bold text represents commands and keywords that you enter literally as shown.

Italic Italic text represents arguments that you replace with actual values.

[ ] Square brackets enclose syntax choices (keywords or arguments) that are optional.

{ x | y | ... }

Braces enclose a set of required syntax choices separated by vertical bars, from which

you select one.

[ x | y | ... ]

Square brackets enclose a set of optional syntax choices separated by vertical bars, from

which you select one or none.

{ x | y | ... } *

Asterisk marked braces enclose a set of required syntax choices separated by vertical

bars, from which you select at least one.

[ x | y | ... ] *

Asterisk marked square brackets enclose optional syntax choices separated by vertical

bars, from which you select one choice, multiple choices, or none.

&<1-n>

The argument or keyword and argument combination before the ampersand (&) sign can

be entered 1 to n times.

# A line that starts with a pound (#) sign is comments.

GUI conventions

Convention Description

Boldface

Window names, button names, field names, and menu items are in Boldface. For

example, the New User window appears; click OK.

> Multi-level menus are separated by angle brackets. For example, File > Create > Folder.

Convention Description

< > Button names are inside angle brackets. For example, click <OK>.

[ ]

Window names, menu items, data table and field names are inside square brackets. For

example, pop up the [New User] window.

/ Multi-level menus are separated by forward slashes. For example, [File/Create/Folder].

Symbols

Convention Description

WARNING

An alert that calls attention to important information that if not understood or followed can

result in personal injury.

CAUTION

An alert that calls attention to important information that if not understood or followed can

result in data loss, data corruption, or damage to hardware or software.

IMPORTANT

An alert that calls attention to essential information.

NOTE

An alert that contains additional or supplementary information.

TIP

An alert that provides helpful information.

About the H3C S5800&S5820X documentation set

The H3C S5800&S5820X documentation set includes:

Category Documents Purposes

Marketing brochures

Describe product specifications and benefits.

Product description and

specifications

Technology white papers

Provide an in-depth description of software

features and technologies.

PSR150-A [ PSR150-D ]

Power Modules User

Manual

Describes the appearances, features, specifications,

installation, and removal of the pluggable 150W

power modules available for the products.

Pluggable module

description

PSR300-12A

[ PSR300-12D1 ] Power

Modules User Manual

Describes the appearances, features, specifications,

installation, and removal of the pluggable 300W

power modules available for the products.

PSR750-A [ PSR750-D ]

Power Modules User

Manual

Describes the appearances, features, specifications,

installation, and removal of the pluggable 750W

power modules available for the products.

RPS User Manual

Describes the appearances, features, and

specifications of the RPS units available for the

products.

LSW1FAN and

LSW1BFAN Installation

Manual

Describes the appearances, specifications,

installation, and removal of the pluggable fan

modules available for the products.

LSW148POEM Module

User Manual

Describes the appearance, features, installation,

and removal of the pluggable PoE module available

for the products.

S5820X [ S5800 ] Series

Ethernet Switches

Interface Cards User

Manual

Describes the models, hardware specifications,

installation, and removal of the interface cards

available for the products.

H3C OAP Cards User

Manual

Describes the benefits, features, hardware

specifications, installation, and removal of the OAP

cards available for the products.

H3C Low End Series

Ethernet Switches

Pluggable Modules

Manual

Describes the models, appearances, and

specifications of the pluggable modules available

for the products.

S5800-60C-PWR

Ethernet Switch Hot

Swappable Power

Module Ordering Guide

Guides you through ordering the hot-swappable

power modules available for the S5800-60C-PWR

switches in different cases.

Power configuration

RPS Ordering Information

for H3C Low-End Ethernet

Switches

Provides the RPS and switch compatibility matrix and

RPS cable specifications.

• S5800 Series Ethernet

Switches Quick Start

• S5820X Series

Ethernet Switches

Quick Start

• S5800 Series Ethernet

Switches CE DOC

• S5820X Series

Ethernet Switches CE

DOC

Provides regulatory information and the safety

instructions that must be followed during installation.

• S5800 Series Ethernet

Switches Quick Start

• S5820X Series

Ethernet Switches

Quick Start

Guides you through initial installation and setup

procedures to help you quickly set up and use your

device with the minimum configuration.

• S5800 Series Ethernet

Switches Installation

Manual

• S5820X Series

Ethernet Switches

Installation Manual

Provides a complete guide to hardware installation

and hardware specifications.

Pluggable SFP[SFP+][XFP]

Transceiver Modules

Installation Guide

Guides you through installing SFP/SFP+/XFP

transceiver modules.

Hardware installation

• S5800-60C-PWR

Switch Video

Installation Guide

• S5820X-28C Switch

Video Installation

Guide

Shows how to install the H3C S5800-60C-PWR and

H3C S5820X-28C Ethernet switches.

Configuration guide

Describe software features and configuration

procedures.

Software configuration

Command reference

Provide a quick reference to all available

commands.

H3C Series Ethernet

Switches Login Password

Recovery Manual

Tells how to find the lost password or recover the

password when the login password is lost.

Operations and

maintenance

Release notes

Provide information about the product release,

including the version history, hardware and software

compatibility matrix, version upgrade information,

technical support information, and software

upgrading.

Obtaining documentation

You can access the most up-to-date H3C product documentation on the World Wide Web at

http://www.h3c.com.

Click the links on the top navigation bar to obtain different categories of product documentation:

[Technical Support & Documents > Technical Documents] – Provides hardware installation, software

upgrading, and software feature configuration and maintenance documentation.

[Products & Solutions] – Provides information about products and technologies, as well as solutions.

[Technical Support & Documents > Software Download] – Provides the documentation released with the

software version.

Technical support

customer_service@h3c.com

http://www.h3c.com

Documentation feedback

You can e-mail your comments about product documentation to [email protected].

We appreciate your comments.

Contents

OAP card configuration commands ··························································································································· 1

oap connect ······························································································································································1

oap reboot ································································································································································2

ACFP configuration commands··································································································································· 3

acfp server enable····················································································································································3

display acfp client-info·············································································································································3

display acfp policy-info············································································································································5

display acfp rule-info················································································································································7

display acfp server-info············································································································································9

ACSEI configuration commands ·······························································································································11

acsei client close···················································································································································· 11

acsei client reboot ················································································································································· 11

acsei server ···························································································································································· 12

acsei server enable ··············································································································································· 12

acsei timer clock-sync············································································································································ 13

acsei timer monitor················································································································································ 13

display acsei client info ········································································································································ 14

display acsei client summary ······························································································································· 16

Index ···········································································································································································18

OAP card configuration commands

oap connect

Syntax

oap connect slot slot-number system system-name

View

User view

Default level

2: System level

Parameters

slot slot-number: Specifies an OAP card on a member device of an Intelligent Resilient Framework (IRF)

virtual device. The slot-number argument takes the member ID of the member of the IRF virtual device,

and its value ranges depend on the number of member devices and there member IDs.

system system-name: Specifies the system name of the OAP card on the certain device. The system-name

argument specifies the OAP system name of the card in the form of SubSlotX with X as the slot number

of the OAP card. For example, the system name of the OAP card in slot 3 is SubSlot3.

Description

Use the oap connect command to redirect from the switch to the software system of the specified OAP

card.

NOTE:

• When this command is executed, the terminal display interface is switched from the command line

interface (CLI) on the switch to the operating interface of the software system of the OAP card, and you

can manage the system and application software on the OAP card.

• To return from the software system on the OAP card to the CLI of the switch, press Ctrl+K.

• You can install multiple OAP cards on some models of the S5800 and S5820X switches. If you lo

in to

the software system of one OAP card first, you cannot lo

in to the software system of another by usin

the oap connect command. To log in to the software system of another

OAP card, return to the CLI on

the switch by pressing Ctrl+K.

• In an IRF virtual device, you can use the oap connect command repeatedly to log in to the software

systems of multiple OAP cards installed on different member switches, but cannot lo

in to the software

systems of multiple OAP cards installed on the same member switch simultaneously.

Examples

# Redirect from the device to the software system of the OAP card in slot 3 of the member device 1.

<Sysname> oap connect slot 1 system SubSlot3

Press CTRL+K to quit.

Connected to SubSlot3

oap reboot

Syntax

oap reboot slot slot-number system system-name

View

User view

Default level

2: System level

Parameters

slot slot-number: Restart the software system of an OAP card on a member of an IRF virtual device. The

slot-number argument takes the member ID of the member of the IRF virtual device, and its value ranges

depend on the number of member devices and there member IDs.

system system-name: Specifies the system name of the OAP card on the certain device. The system-name

argument specifies the system name of the OAP card in the form of SubSlotX with X as the slot number

of the OAP card. For example, the system name of the OAP card in slot 3 is SubSlot3.

Description

Use the oap reboot command to restart the software system of the specified OAP card.

Examples

# Restart the software system of the OAP card in slot 3 of member device 1.

<Sysname> oap reboot slot 1 system SubSlot3

This command will recover the SubSlot3 from shutdown or other failed state.

Warning: This command may lose the data on the hard disk if the SubSlot1 is not

being shut down! Continue? [Y/N]:y

Reboot SubSlot1 by command.

ACFP configuration commands

acfp server enable

Syntax

acfp server enable

undo acfp server enable

View

System view

Default level

2: System level

Parameters

None

Description

Use the acfp server enable command to enable the ACFP server.

Use the undo acfp server enable command to disable the ACFP server.

By default, the ACFP server is disabled.

NOTE:

In case that the ACSEI server is enabled on the device, when you first disable and then enable the ACFP

server, to ensure that the ACFP collaboration rules can be resent to the ACFP server, you must also disable

and then enable the ACSEI server.

Related commands: acsei server enable (ACSEI Configuration Commands in the OAA Command

Reference).

Examples

# Enable the ACFP server.

<Sysname> system-view

[Sysname] acfp server enable

display acfp client-info

Syntax

display acfp client-info [ client-id ] [ | { begin | exclude | include } regular-expression ]

View

Any view

Default level

1: Monitor level

Parameters

client-id: Displays information of the specified ACFP client, where client-id is the ACFP client identifier, in

the range of 1 to 2147483647.

|: Filters command output by specifying a regular expression. For more information about regular

expressions, see CLI configuration in the Configuration Fundamentals Configuration Guide.

begin: Displays the first line that matches the specified regular expression and all lines that follow.

include: Displays all lines that match the specified regular expression.

regular-expression: Specifies a regular expression, which is a case sensitive string of 1 to 256 characters.

Description

Use the display acfp client-info command to display the information about the specified ACFP client(s).

NOTE:

If no ACFP client ID is specified, the information about all the ACFP clients is displayed.

Examples

# Display the information about all the ACFP clients.

<Sysname> display acfp client-info

ACFP client total number: 1

ClientID: 4

Description: IPS

Hw-Info: 1.0

OS-Info: Linux Kernel 2.4.20-8

App-Info: 2.0

Client IP: 10.1.1.1

Client Mode: mirror

Table 1 Output description

Field Description

ACFP client total number Total number of ACFP clients

ClientID

Client ID, index of client list

Description Description information of client

Hw-Info

Hardware information of the client

OS-Info

Operating system information of the client

App-Info

Application software information of the client

Client IP

Client IP address

Client Mode

Working mode supported on the client:

• redirect: redirect mode

• mirror: mirror mode

display acfp policy-info

Syntax

display acfp policy-info [ client client-id [ policy-index ] | dest-interface interface-type interface-number

| in-interface interface-type interface-number | out-interface interface-type interface-number ] [ active |

inactive ] [ | { begin | exclude | include } regular-expression ]

View

Any view

Default level

1: Monitor level

Parameters

client client-id: Displays the policy sent by the specified ACFP client, where client-id is the ACFP client ID,

in the range of 1 to 2147483647.

policy-index: Policy index, in the range of 1 to 2147483647.

dest-interface interface-type interface-number: Displays all the policies that use the specified interface

(destination interface) for connecting to the ACFP client, where interface-type interface-number is the

interface type and interface number.

in-interface interface-type interface-number: Displays all the policies that use the specified interface as

the inbound interface, where interface-type interface-number is the interface type and interface number.

out-interface interface-type interface-number: Displays all the policies that use the specified interface as

the outbound interface, where interface-type interface-number is the interface type and interface

number.

active: Displays active policies only.

inactive: Displays inactive policies only.

|: Filters command output by specifying a regular expression. For more information about regular

expressions, see CLI configuration in the Configuration Fundamentals Configuration Guide.

begin: Displays the first line that matches the specified regular expression and all lines that follow.

include: Displays all lines that match the specified regular expression.

regular-expression: Specifies a regular expression, which is a case sensitive string of 1 to 256 characters.

Description

Use the display acfp policy-info command to display the ACFP policy information.

NOTE:

• When you use this command to display the policy information sent

by the specified ACFP client, if you

specify the

policy-index

argument, the command displays the information about the policy whose

number is

policy-index

applied by the ACFP client with an ID of

client-id

. Otherwise, the command

displays the information about all the policies sent by the ACFP client with an ID of

client-id.

• If neither the active nor inactive keyword is specified, the command displays all the active or inactive

policies.

• If no argument is specified, the command displays the information about all the policies.

xamples

# Display the information about the effective policies for all the packets that use GigabitEthernet 1/0/1

as the inbound interface.

<Sysname> display acfp policy-info in-interface gigabitethernet 1/0/1 active

ACFP policy total number: 1

ClientID: 1 Policy-Index: 2

Rule-Num: 20 ContextID: 2007

Exist-Time: 100000(s) Life-Time: 864000(s)

Start-Time: 9:00 End-Time: 12:00

Admin-Status: enable Effect-Status: active

DestIfFailAction: reserve Priority: 4

In-Interface: GigabitEthernet1/0/1

Out-Interface: GigabitEthernet1/0/2

Dest-Interface: Ten-GigabitEthernet1/3/1

Table 2 Output description

Field Description

ACFP policy total number Total number of ACFP policies

ClientID

Client ID, index of client list

Policy-Index Policy index

Rule-Num

Number of rules under the policy

ContextID

Context ID

Exist-Time

For how long the policy existed, in seconds

Life-Time

Policy expiration time, in seconds

Start-Time

Policy start time

End-Time

Policy end time

Admin-Status

Policy administration status

Effect-Status

Whether the policy is effective.

DestIfFailAction

If the policy dest-interface is down, the action to all rules under the policy

will be either of the following one:

• delete: Keep the redirected and mirrored packets being forwarded

(for forwarding first devices, select the delete action);

• reserve: Discard the redirected and mirrored packets (for security first

devices, select the reserve action).

Priority

Priority of a policy, number notation, in the range of 1 to 8 (the bigger the

number, the higher the priority).

In-Interface

Inbound interface of the packet

Out-Interface

Outbound interface of the packet

Dest-Interface

Interface connected to the ACFP client

display acfp rule-info

Syntax

display acfp rule-info { in-interface [ interface-type interface-number ] | out-interface [ interface-type

interface-number ] | policy [ client-id policy-index ] } [ | { begin | exclude | include } regular-expression ]

View

Any view

Default level

1: Monitor level

Parameters

in-interface: Displays ACFP rule information in order of inbound interface. The ACFP rule information

which does not include the inbound interface is not displayed.

out-interface: Displays ACFP rule information in order of outbound interface. The ACFP rule information

which does not include the outbound interface is not displayed.

interface-type interface-number: Specifies an interface by its type and number.

policy: Displays the ACFP rule information in order of policy.

client-id: ACFP client ID, in the range of 1 to 2147483647.

policy-index: Policy index, in the range of 1 to 2147483647.

|: Filters command output by specifying a regular expression. For more information about regular

expressions, see CLI configuration in the Configuration Fundamentals Configuration Guide.

begin: Displays the first line that matches the specified regular expression and all lines that follow.

include: Displays all lines that match the specified regular expression.

regular-expression: Specifies a regular expression, which is a case sensitive string of 1 to 256 characters.

Description

Use the display acfp rule-info command to display ACFP rule information.

NOTE:

• When you use this command to display ACFP rule information in order of policy, if you specify neither

client ID nor policy index, the rule information of all the policies is displayed.

• When you use this command to display ACFP rule information in order of outbound/inbound interface,

if you specify no interface, the rule information for all the inbound interfaces or outbound interfaces is

displayed.

Examples

# Display ACFP rule information in order of inbound interface.

<Sysname> display acfp rule-info in-interface gigabitethernet 1/0/1

In-Interface: GigabitEthernet1/0/1

ACFP rule total number: 1

ClientID:2 Policy-Index:2 Rule-Index:5

SMAC:00-01-02-03-04-05 DMAC:01-02-03-04-05-06

StartVLAN:2000 EndVLAN:2004

PackRate:128 Kbps

Action:rate Status:active OperationStatus:succeeded

# Display ACFP rule information in order of policy.

<Sysname> display acfp rule-info policy 1 1

ACFP Rule total number: 1

ClientID:1 Policy-Index:1 Rule-Index:1

SIP:192.168.132.122 SMask:0.0.0.255 SPort:65500 to 65535

DIP:192.168.112.115 DMask:0.0.0.255 DPort:65500 to 65535

Protocol:ipinip Fragment:false DSCP:AF11

Action:redirect Status:inactive OperationStatus:succeeded

Table 3 Output description

Field Description

In-Interface

Inbound interface of the packet

ACFP rule total number Total number of ACFP rules

ClientID

Client ID, index of client list

Policy-Index Policy index

Rule-Index

Rule index

SMAC Source MAC address

DMAC Destination MAC address

StartVLAN Start VLAN of the source VLAN

EndVLAN End VLAN of the source VLAN

PackRate Value of the restricted rate of packets, in kbps.

SIP

Source IP address

SMask

Inverse mask of source IP address

SPort

Source port number

DIP

Destination IP address

DMask

Inverse mask of destination IP address

DPort

Destination port number

Protocol

Protocol of the packet: GRE, ICMP, IGMP, IPinIP, OSPF, TCP, UDP, IP,

and so on.

Fragment

Whether the packet is a fragment:

• true: Indicates the packet is a fragment

• false: Indicates all the packets, not concerned about whether the

packet is a fragment or not

ToS

Type of Service, indicated by a number in the range of 0 to 15

Pre

Packet precedence, indicated by a number in the range of 0 to 7

DSCP

Differentiated Services Code Point, indicated by characters for Be, Ef,

Af11, Af12, Af13, Af21, Af22, Af23, Af31, Af32, Af33, Af41, Af42,

Af43, Cs1, Cs2, Cs3, Cs4, Cs5, Cs6, and Cs7 and indicated by a

number in the range 0 to 63 for other code points

Field Description

TCPFlag

The value is six bits, which represents URG, ACK, PSH, RST, SYN, and

FIN respectively from low to high.

TCPMask

The value is six bits, which represents URG mask, ACK mask, PSH mask,

RST mask, SYN mask, and FIN mask respectively from low to high.

For each bit, the value 1 indicates that this bit is concerned, and the value

0 indicates that this bit is not concerned.

Action

Action, including:

• permit

• deny

• mirror

• redirect

• rate: rate limit

Status

Rule status: active or inactive

OperationStatus Rule application status: succeeded or failed

display acfp server-info

Syntax

display acfp server-info [ | { begin | exclude | include } regular-expression ]

View

Any view

Default level

1: Monitor level

Parameters

|: Filters command output by specifying a regular expression. For more information about regular

expressions, see CLI configuration in the Configuration Fundamentals Configuration Guide.

begin: Displays the first line that matches the specified regular expression and all lines that follow.

include: Displays all lines that match the specified regular expression.

regular-expression: Specifies a regular expression, which is a case sensitive string of 1 to 256 characters.

Description

Use the display acfp server-info command to display ACFP server information.

Examples

# Display ACFP server information.

<Sysname> display acfp server-info

Server-Info: ipserver redirect mirror

Max Life-Time: 2147483647(s)

PersistentRules: false

ContextType: HGPlus-context

Table 4 Output description

Field Description

Server-Info

ACFP client working mode supported by the ACFP server:

• redirect: redirect mode

• mirror: mirror mode

Max Life-Time

Maximum expiration time (in seconds) of the collaboration policy

supported by the server

PersistentRules Whether the server supports permanent collaboration rules.

ContextType

Context ID types supported by the server:

• no-context: No context ID is carried.

• HG-context: Carrying the preamble HG as the context ID.

• HGPlus-context: Carrying the preamble HGPlus as the context ID.

• FlowID-context: Carrying the preamble Flow ID as the context ID.

• VLANID-context: Carrying VLAN ID as the context ID.

The S5800&S5820X switches support carrying the preamble HGPlus as

the context ID (the HGPlus-context) only.

ACSEI configuration commands

acsei client close

Syntax

acsei client close client-id

View

ACSEI server view

Default level

2: System level

Parameters

client-id: ID of the ACSEI client to be closed. An ACSEI client ID is assigned by the ACSEI server, which

ranges from 1 to 10.

Description

Use the acsei client close command to close the specified ACSEI client.

Examples

# Close ACSEI client 1.

<Sysname> system-view

[Sysname] acsei server

[Sysname-acsei-server] acsei client close 1

acsei client reboot

Syntax

acsei client reboot client-id

View

ACSEI server view

Default level

2: System level

Parameters

client-id: ID of the ACSEI client to be restarted, which ranges from 1 to 10.

Description

Use the acsei client reboot command to restart the specified ACSEI client.

Examples

# Restart ACSEI client 1.

<Sysname> system-view

[Sysname] acsei server

[Sysname-acsei-server] acsei client reboot 1

acsei server

Syntax

acsei server

View

System view

Default level

2: System level

Parameters

None

Description

Use the acsei server command to enter ACSEI server view.

Examples

# Enter ACSEI server view.

<Sysname> system-view

[Sysname] acsei server

[Sysname-acsei-server]

acsei server enable

Syntax

acsei server enable

undo acsei server enable

View

System view

Default level

2: System level

Parameters

None

Description

Use the acsei server enable command to enable ACSEI server.

Use the undo acsei server enable command to disable ACSEI server.

By default, ACSEI server is disabled.

Examples

# Enable ACSEI server.

<Sysname> system-view

[Sysname] acsei server enable

Page is loading ...

H3C s5820x series Oaa Command Reference

Brand: H3C

Model: s5820x series

Type: Oaa Command Reference

This manual is also suitable for

s5800 series

Enterprise campus networks: The s5820x series can serve as a core or distribution switch in a large enterprise campus network. It provides high-speed connectivity for data, voice, and video traffic, and it supports a variety of Layer 2 and Layer 3 switching features.

Download PDF

report

H3C s5820x series Oaa Command Reference

This manual is also suitable for

H3C s5820x series Oaa Command Reference

Related papers

Other documents