Philips DCP750/37 Quick start guide

Philips
Brand
Philips
Model
DCP750/37
Category
Portable DVD/Blu-Ray players
Type
Quick start guide

This manual is also suitable for

Philips DCP750/37: Enjoy movies, photos, and music on the go with this portable DVD player. It features a built-in dock for iPod, allowing you to play and charge your iPod directly. The player also has a built-in SD/MMC card slot for expanding your entertainment options. With its long battery life and swivel screen, the DCP750/37 is the perfect travel companion for entertainment on the move.

Philips DCP750/37: Enjoy movies, photos, and music on the go with this portable DVD player. It features a built-in dock for iPod, allowing you to play and charge your iPod directly. The player also has a built-in SD/MMC card slot for expanding your entertainment options. With its long battery life and swivel screen, the DCP750/37 is the perfect travel companion for entertainment on the move.

Connecting and
using your iPod
player
1 Pull out the iPod
connector.
2 Dock your iPod player
with the top
entering first as
shown.
3 Push in the iPod
connector.
This portable DVD player is designed with
a built-in lithium battery to supply power
to the player when you are on travel.
1 Slide the POWER switch to the OFF
position.
2 Connect the supplied power adaptor cord
(or the car adaptor) to the player and AC
mains (or the car cigarette lighter outlet)
to start charging.
➜ The CHG indicator turns on.
3 Disconnect the power adaptor cord (or
the car adaptor) when the CHG indicator
turns off.
Notes:
– You can also connect the supplied power
adaptor cord (or the car adaptor) to the player
and AC mains (or the car cigarette lighter outlet)
directly wherever possible.
– Before using the DVD player for the first time,
make sure to charge the battery for 8 hours at
least.
Charge
1
Quick start guide
Docking Entertainment System
DVD Portable with dock for iPod
3 OPEN HERE
DCP750/850
2,3
1
OR
1 Lift up the handle marked /
EJECT to take out the
remote control.
Prepare your remote
control
2
2 Remove the protective plastic
tab (first time users only).
➜ Your remote control is
now ready for use.
1
SO
URCE
4 Switch on your iPod player to set "TV
OUT" to "ON" and select the "NTSC"
mode. (See your iPod user’s manual for
detailed operation.)
3
Enjoy (iPod with video)
Notes:
– This DVD player only supports 30G, 60G and
80G iPod player with video.
– Please take out the tab marked “for 30G iPod” in
the dock if you want to dock a 60G or 80G iPod
player.
– You need to press 2; on your iPod player in
order to start photo playback through this DVD
player.
VIDEO
2
3
5 Press the SOURCE key
repeatedly (or DOCK on the
remote) for dock input.
6 Play files in your iPod player.
● To r echarge your iPod player:
Case 1: In the power-off mode, you just need to
connect the DVD player to AC mains or the car
cigarette lighter outlet.
Case 2: In the power-on mode, make sure the
current source of the DVD player is “DOCK”
before proceeding as described in case 1.
To r emove the iPod player
1 Pull out the iPod connector.
2 Lift up the handle marked / EJECT to release.
5
SOURCE
2
1
DCP750/850 QSG-2.qxd 2006.11.30 9:19 Page 1
Connecting headphones (not
included)
● To enjoy your portable DVD player
without disturbing others, you can connect
one or more headphones to the n1 or
(and) n 2 jack on the set.
Connecting an SD/MMC card
1 Insert an SD/MMC card into the SD
CARD slot with the metal contact facing
down.
2 On the DVD player panel, press the
source key repeatedly (or SD/MMC
CARD on the remote).
3 Play video or audio files stored in the card
by selecting the desired file with 3 4 and
OK.
Connecting additional equipment
(TV for example)
1 Connect the AV OUT socket on the set to
the video and audio sockets on a TV as
shown directly.
2 Switch on the TV and set to the correct
video-in channel.
➜ You can consult the owner's manual of
your TV. (If your TV does not have Audio
and Video inputs, you will need to
purchase a RF modulator. Please consult
your dealer.)
TIP:
– When connecting a device to the AV IN socket
on the DVD player, you need to press the source
key repeatedly on the front panel (or AV on the
remote) to select A/V IN (AUX).
White
Red
Yellow
White
Red
Yellow
OUT
OUT
AV OUT
AV IN
Headphone
SD/MMC
OR
Printed in China WK647
1
2
3
5
Max.180
0
4
1 Open the lid of the player and adjust the
swivel screen clockwise to your preferred
viewing angle.
2 Slide the POWER switch to ON to
switch on the DVD player.
➜ The POWER indicator turns on.
3 Press OPEN to open the disc door.
4 Remove the protective card (if any) and
load a disc with the label side facing up.
5 Close the disc door. Playback will start
automatically. If not, press 2;.
6 To stop playback, press 9 on the remote
control.
3
Enjoy (Disc operation)
3
Enjoy (Other options)
DCP750/850 QSG-2.qxd 2006.11.30 9:19 Page 2
  • Page 1 1
  • Page 2 2

Philips DCP750/37 Quick start guide

Philips
Brand
Philips
Model
DCP750/37
Category
Portable DVD/Blu-Ray players
Type
Quick start guide
This manual is also suitable for

Philips DCP750/37: Enjoy movies, photos, and music on the go with this portable DVD player. It features a built-in dock for iPod, allowing you to play and charge your iPod directly. The player also has a built-in SD/MMC card slot for expanding your entertainment options. With its long battery life and swivel screen, the DCP750/37 is the perfect travel companion for entertainment on the move.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents