Samsung PA51H4500AW Quick start guide

BN68-05773L-00

Contact SAMSUNG WORLD WIDE

If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre.

Country

Customer Care Centre

Web Site

NIGERIA 0800-726-7864 www.samsung.com/africa_en/

GHANA 0800-10077

0302-200077

www.samsung.com/africa_en/

COTE D’ IVOIRE 8000 0077 www.samsung.com/africa_fr/

SENEGAL 800-00-0077 www.samsung.com/africa_fr/

CAMEROON 7095- 0077 www.samsung.com/africa_fr/

KENYA 0800 545 545 www.samsung.com

UGANDA 0800 300 300 www.samsung.com

TANZANIA 0685 88 99 00 www.samsung.com

RWANDA 9999 www.samsung.com

BURUNDI 200 www.samsung.com

DRC 499999 www.samsung.com

SUDAN 1969 www.samsung.com

SOUTH AFRICA 0860-SAMSUNG (726-7864) www.samsung.com

BOTSWANA 8007260000 www.samsung.com

NAMIBIA 08 197 267 864 www.samsung.com

ZAMBIA 0211 350370 www.samsung.com

MOZAMBIQUE 847267864 / 827267864 www.samsung.com

ALGERIA 0800 100 100 www.samsung.com/n_africa

TUNISIA 80-1000-12 www.samsung.com/n_africa

PDP TV

user manual

Thank you for purchasing this Samsung product.

To receive more complete service, please register

your product at

www.samsung.com/register

Model _____________Serial No. ________________

[PH4500-SH]BN68-05773L-X0L04.indb 1 2014-01-29  10:42:31

English - 2

Important Safety Instructions

Warning! Important Safety Instructions

(Please read the appropriate section that corresponds to the marking on your Samsung product before attempting to

install the product.)

CAUTION

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK). THERE ARE

NO USER SERVICEABLE PARTS INSIDE. REFER ALL

SERVICING TO QUALIFIED PERSONNEL.

RISK OF ELECTRIC SHOCK DO NOT OPEN

This symbol indicates that high voltage is

present inside. It is dangerous to make any kind

of contact with any internal part of this product.

This symbol alerts you that important literature

concerning operation and maintenance has

been included with this product.

• The slots and openings in the cabinet and in the back or bottom are provided for necessary ventilation. To ensure reliable operation of this apparatus,

and to protect it from overheating, these slots and openings must never be blocked or covered.

− Do not cover this apparatus in a conﬁned space, such as a bookcase, or built-in cabinet, unless proper ventilation is provided.

− Do not place this apparatus near or over a radiator or heat resistor, or where it is exposed to direct sunlight.

− Do not place a water containing vessel (vases etc.) on this apparatus, as this can result in a risk of ﬁre or electric shock.

• Do not expose this apparatus to rain or place it near water (near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement, or near a

swimming pool etc.). If this apparatus accidentally gets wet, unplug it and contact an authorised dealer immediately. Make sure to pull out the power

cord from the outlet before cleaning.

• This apparatus use batteries. In your community there might be regulations that require you to dispose of these batteries properly under

environmental considerations. Please contact your local authorities for disposal or recycling information.

• Do not overload wall outlets, extension cords or adaptors beyond their capacity, since this can result in ﬁre or electric shock.

• Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular

attention to cords at plug end, adaptors and the point where they exit from the appliance.

• To protect this apparatus from a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and

disconnect the antenna or cable system. This will prevent damage to the set due to lightning and power line surges.

• Before connecting the AC power cord to the DC adaptor outlet, make sure the voltage designation of the DC adaptor corresponds to the local

electrical supply.

• Never insert anything metallic into the open parts of this apparatus. Doing so may create a danger of electric shock.

• To avoid electric shock, never touch the inside of this apparatus. Only a qualiﬁed technician should open this apparatus.

• Make sure to plug the power cord in until it is ﬁrmly inserted. When removing the power cord, make sure to hold the power plug when pulling the

plug from the outlet. Do not touch the power cord with wet hands.

• If this apparatus does not operate normally - in particular, if there are any unusual sounds or smells coming from it - unplug it immediately and

contact an authorised dealer or service centre.

• Be sure to pull the power plug out of the outlet if the TV is to remain unused or if you are to leave the house for an extended period of time (especially

when children, elderly or disabled people will be left alone in the house).

− Accumulated dust can cause an electric shock, an electric leakage or a ﬁre by causing the power cord to generate sparks and heat or the

insulation to deteriorate.

• Be sure to contact an authorised service centre, when installing your set in a location with heavy dust, high or low temperatures, high humidity,

chemical substances and where it operates for 24 hours such as the aerial port, the train station etc. Failure to do so may cause serious damage to

your set.

• Use only a properly grounded plug and receptacle.

• An improper ground may cause electric shock or equipment damage. (Class l Equipment only.)

• To disconnect the apparatus from the mains, the plug must be pulled out from the mains socket, therefore the mains plug shall be readily operable.

• Do not allow children to hang onto the product.

• Store the accessories (battery, etc.) in a location safely out of the reach of children.

• Do not install the product in an unstable location such as a shaky self, a slanted ﬂoor or a location exposed to vibration.

• Do not drop or impart any shock to the product. If the product is damaged, disconnect the power cord and contact a service centre.

• Unplug the power cord from the power outlet and wipe the product using a soft, dry cloth. Do not use any chemicals such as wax, benzene, alcohol,

thinners, insecticide, aerial freshener, lubricant or detergent. This may damage the appearance or erase the printing on the product.

• Apparatus shall not be exposed to dripping or splashing.

• Do not dispose of batteries in a ﬁre.

• Do not short circuit, disassemble or overheat the batteries.

• Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.

• WARNING - TO PREVENT THE SPREAD OF FIRE, KEEP CANDLES OR OTHER OPEN FLAMES AWAY FROM THIS PRODUCT AT ALL TIMES.

[PH4500-SH]BN68-05773L-X0L04.indb 2 2014-01-29  10:42:32

English

English - 3

Figures and illustrations in this User Manual are provided for reference only and may differ from actual product

appearance. Product design and speciﬁcations may be changed without notice.

Important Warranty Information Regarding Television

Format Viewing

1. Functionalities related to Digital TV (DVB) are only available in countries/areas where DVB-T (MPEG2 and MPEG4

AVC) digital terrestrial signals are broadcasted or where you are able to access to a compatible DVB-C (MPEG2 and

MPEG4 AAC) cable-TV service. Please check with your local dealer the possibility to receive DVB-T or DVB-C signal.

2. DVB-T is the DVB European consortium standard for the broadcast transmission of digital terrestrial television and

DVB-C is that for the broadcast transmission of digital TV over cable. However, some differentiated features like

EPG (Electric Programme Guide), VOD (Video On Demand) and so on, are not included in this speciﬁcation. So, they

cannot be workable at this moment.

3. Although this TV set meets the latest DVB-T and DVB-C standards, as of [August, 2008], the compatibility with

future DVB-T digital terrestrial and DVB-C digital cable broadcasts cannot be guaranteed.

4. Depending on the countries/areas where this TV set is used some cable-TV providers may charge an additional fee

for such a service and you may be required to agree to terms and conditions of their business.

5. Some Digital TV functions might be unavailable in some countries or regions and DVB-C might not work correctly

with some cable service providers.

6. For more information, please contact your local Samsung customer care centre.

✎

The reception quality of TV may be affected due to differences in broadcasting method between the

countries. Please check the TV performance in the local SAMSUNG Authorized Dealer, or the Samsung Call

Centre whether it can be improved by reconfiguring TV setting or not.

[PH4500-SH]BN68-05773L-X0L04.indb 3 2014-01-29  10:42:32

English - 4

User Instructions

• Screen Image retention

Do not display a still image (such as on a video game) on the plasma display panel for more than several minutes

as it can cause screen image retention. This image retention is also known as “screen burn”. To avoid such image

retention, reduce the degree of brightness and contrast of the screen when displaying a still image.

• Heat on the top of the Plasma TV

The top side of the product may be hot after long periods of use as heat dissipates from the panel through the vent

hole in the upper part of the product.

This is normal and does not indicate any defect or operation failure of the product.

However, children should be prevented from touching the upper part of the product.

• The product is making a “cracking” noise.

A “cracking” noise may occur when the product contracts or expands due to a change in the surrounding

environment such as temperature or humidity. This is normal and not a defect of the unit.

• Cell Defects

The PDP uses a panel consisting of 2,360,000(HD-level) to 6,221,000(FHD-level) pixels which require sophisticated

technology to produce. However, there may be a few bright or dark pixels on the screen. These pixels will have no

impact on the performance of the product.

• Avoid operating the TV at temperatures below 41°F (5°C)

• A still image displayed too long may cause permanent damage to the PDP Panel.

Watching the Plasma TV in 4:3 format for a long period of time may leave traces of borders displayed

on the left, right and centre of the screen caused by the difference of light emission on the screen.

Playing a DVD or a game console may cause similar effects to the screen.

Damages caused by the above effect are not covered by the Warranty.

• After-images on the Screen.

Displaying still images from Video games and PC for longer than a certain period of time may produce partial after-images.

To prevent this effect, reduce the “brightness” and “contrast” when displaying still images for a long time.

• Warranty

Warranty does not cover any damage caused by image retention.

Burn-in is not covered by the warranty.

• Caution

The glass screen of your PDP TV can break if you accidently drop the TV. Handle the TV with care.

When moving the TV, always have two or more people pick it up and carry it as a safety precaution.

Do not lay the TV ﬂat on its face or back.

Your Samsung Plasma TV is a high quality television that has been carefully packaged to protect the integrity of

its glass panel and component parts during shipment. It is, nonetheless, a fragile piece of electronics that requires

careful handling. Refrain from putting undue stress on any part of the packaging when shipping or unpacking the

TV. Use care when installing the TV. Avoid placing the TV in a location where it may be struck, exposed to sharp

impacts, or fall. Panel breakage caused by a fall or impact strike is not covered under the manufacturer's warranty.

[PH4500-SH]BN68-05773L-X0L04.indb 4 2014-01-29  10:42:32

English

English - 5

List of Features

• Media Play: Allows you to play music ﬁles, pictures, and movies saved on a USB device.

• e-Manual: Allows you to read on screen full manual. (p. 10)

Accessories

✎

Please make sure the following items are included with your TV. If any items are missing, contact your dealer.

✎

The items’ colours and shapes may vary depending on the models.

✎

Cables not included in the package contents can be purchased separately.

[

CAUTION: INSERT SECURELY LEST SHOULD BE DETACHED IN SET

• Remote Control & Batteries (AAA x 2) • Power Cord

• Warranty Card / Regulatory Guide • Owner’s Instructions

Cable Holder Arrange the cables using the Cable Holder

Ferrite Core (2EA)

B

A

B

A

✎

Ferrite Core for Power Cord: The ferrite cores are used to shield

the cables from interference. When connecting a cable, open the

ferrite core and clip it around the cable near the plug as shown in

the figure.

• A Maximum distance between the ferrite core and the end of

the cord inserted in the TV: 3/4 inches (2cm)

• B Maximum distance between the ferrite core and the other

end of the cord inserted in the AC outlet: 3/4 inches (2cm)

[PH4500-SH]BN68-05773L-X0L04.indb 5 2014-01-29  10:42:32

English - 6

Installing batteries (Battery size: AAA)







Viewing the Remote Control

✎

This remote control has Braille points on the Power, Channel, and Volume buttons and can be used by visually

impaired persons.

Turns the TV on and off.

Displays and selects the available video sources.

Returns to the previous channel.

Cuts off the sound temporarily.

Changes channels.

Displays channel lists on the screen.

Displays the EPG (Electronic Programme Guide).

Displays information on the TV screen.

Exits the menu.

Press to directly access to channels.

Adjusts the volume.

Alternately select Teletext ON, Double, Mix

or OFF.

Displays the main on-screen menu.

Quickly select frequently used functions.

Displays Media Play.

Returns to the previous menu.

Selects the on-screen menu items and

changes the values seen on the menu.

Use these buttons according to the direction on

screen.

Use these buttons in a speciﬁc feature.

For details, refer to the e-Manual.

E-MANUAL: Displays the e-Manual guide.

(p. 10)

˜: Display the Screen&Sound Capture

mode.

: Enable Sport Mode for the optimal sports

viewing experience.

[PH4500-SH]BN68-05773L-X0L04.indb 6 2014-01-29  10:42:33

English

English - 7

Using the TV’s Controller (Panel Key)

The TV's Controller, a small joy stick like button on the rear left side of the TV, lets you control the TV without the remote

control.

✎

Some functions which require a PIN code may not be available.

✎

The product colour and shape may vary depending on the model.

✎

Exits the menu when pressing the controller more than 1 second.

✎

When using the controller in the up/down/left/right directions, make sure you do not push the controller in first. If

you push the controller in first it will not move in the up/down/left right directions.

Remote control sensor

TV Controller

The image is drawn by facing the

front side of the TV.

Return

Selecting the Media Play

Selecting a Source

Power off

Selecting the Menu

Function menu

Standby mode

Do not leave your TV in standby mode for long periods of time (when you are away on a holiday, for example). A small

amount of electric power is still consumed even when the power button is turned off. It is best to unplug the power cord.

To see Analog channels clearly, prevent the antenna

cables from contacting the rear of the TV.

Connect the antenna cables directly without using

a divider.

✎

The PDP device may interfere with an amateur radio or AM radio.

✎

When using two-way radio mobile and portable units or amateur radio or AM radio near by your TV, this may

cause the TV to malfunction.

[PH4500-SH]BN68-05773L-X0L04.indb 7 2014-01-29  10:42:33

English - 8

Initial Setup

When the TV is initially powered on, a sequence of on-screen prompts will assist in conﬁguring basic settings. Press the

POWERP button. Setup is available only when the source is set to TV.

✎

If you connect any device to HDMI IN 1(STB) before starting the installation, Channel Source will be changed to

Set-top box automatically. If you do not want to select Set-top box, please select Aerial.

If You Want to Reset This Feature...

Select System - Setup (Initial Setup). Enter your 4 digit PIN number. The default PIN number is “0-0-0-0”. If you want to

change the PIN number, use the Change PIN function.

You should do Setup (MENU → System) again at home even though you did in shop already.

✎

If you forget the PIN code, press the remote control buttons in the following sequence in Standby mode, which

resets the PIN to “0-0-0-0”: MUTE → 8 → 2 → 4 → POWER (on)

Changing the Input Source

Source

TV / Ext. / HDMI1 / HDMI2/DVI / AV / Component

Use to select TV or other external input sources such as DVD / Blu-ray players / cable box / STB satellite receiver

connected to the TV.

✎

Press the SOURCE button. In the displayed Source list, connected inputs will be highlighted.

✎

PC(D-Sub) input is not supported. If you want to connect PC to the TV, you can connect the HDMI to DVI cable

with the HDMI IN 2(DVI) port on the TV.

✎

Ext. always stays activated.

✎

Press the TOOLS button.

• Edit Name

You can set an external input source name you want.

− When connecting a PC to the HDMI IN 2(DVI) port with HDMI cable, you should set the TV to PC mode under

Edit Name.

− When connecting a PC to the HDMI IN 2(DVI) port with HDMI to DVI cable, you should set the TV to DVI PC

mode under Edit Name.

− When connecting an AV devices to the HDMI IN 2(DVI) port with HDMI to DVI cable, you should set the TV to

DVI Devices mode under Edit Name.

• Information

You can see detailed information about the connected external device.

[PH4500-SH]BN68-05773L-X0L04.indb 8 2014-01-29  10:42:33

English

English - 9

Connecting to a COMMON INTERFACE slot (Your TV

viewing Card Slot)

✎

Turn the TV off to connect or disconnect a CI card.

Using the “CI or CI+ CARD”

To watch paid channels, the “CI or CI+ CARD” must be inserted.

• If you don’t insert the “CI or CI+ CARD”, some channels will

display the message “Scrambled Signal”.

• The pairing information containing a telephone number, the “CI or

CI+ CARD” ID the Host ID and other information will be displayed

in about 2~3 minutes. If an error message is displayed, please

contact your service provider.

• When the conﬁguration of channel information has ﬁnished, the

message “Updating Completed” is displayed, indicating the

channel list is updated.

• The image may differ depending on the

model.

✎

NOTE

• You must obtain a “CI or CI+ CARD” from a local cable service provider.

• When removing the “CI or CI+ CARD”, carefully pull it out with your hands since dropping the “CI or CI+ CARD”

may cause damage to it.

• Insert the “CI or CI+ CARD” in the direction marked on the card.

• The location of the COMMON INTERFACE slot may be different depending on the model.

• “CI or CI+ CARD” is not supported in some countries and regions; check with your authorized dealer.

• If you have any problems, please contact a service provider.

• Insert the “CI or CI+ CARD” that supports the current aerial settings. The screen will be distorted or will not be

seen.

[PH4500-SH]BN68-05773L-X0L04.indb 9 2014-01-29  10:42:33

English - 10

How to use the e-Manual

E-MANUAL

You can ﬁnd instructions about your TV’s features in the e-Manual in your TV. To use, press the

E-MANUAL button on your remote. Move the cursor using the up/down/right/left buttons to highlight

a category, then a topic, and then press the ENTERE button. The e-Manual displays the page you

want to see.

You can also access it through the menu:

O MENUm → Support → e-Manual → ENTERE

✎

To return to the e-Manual main menu, press the E-MANUAL button on the remote.

Screen Display

Basic Features

Changing the Preset Picture Mode

Adjusting Picture Settings

Changing the Picture Options

Changing the Preset Sound Mode

Adjusting Sound Settings

} Index E Enter e Exit

Currently

displayed video,

TV Programme,

etc.

The category list. Press l or r button

to select the category you want.

Displays the sub-menu list. Use the

arrow buttons on your remote to move

the cursor. Press ENTERE button to

select the sub-menu you want.

Operation Buttons

} Index: Displays the index screen.

E Enter: Selects a category or sub-menu.

e Exit: Exit the e-Manual.

a Try now: Displays the OSD menu that corresponds to the topic. To return to the e-Manual screen, press the

E-MANUAL button.

b Home: Moves to the e-Manual home screen.

L Page: Moves to previous or next page.

{

Zoom: Magniﬁes a screen.

− Press the { (Zoom) button to magnify the screen. You can scroll through the magniﬁed screen by using the u

or d buttons. To return to the screen to normal size, press the RETURN button.

How to toggle between an e-Manual topic and the corresponding OSD menu(s).

✎

This function is not enabled in some menus.

✎

You cannot use the Try now function if the menu is not activated.

[PH4500-SH]BN68-05773L-X0L04.indb 10 2014-01-29  10:42:34

English

English - 11

Method 1 Method 2

1. If you want to use the menu that corresponds to an

e-Manual topic, press the red button to select Try now.

2. To return to the e-Manual screen, press the E-MANUAL

button.

1. Press the ENTERE button when a topic is displayed.

“Are you sure?” appears. Select Yes, and then press the

ENTERE button. The OSD window appears.

2. To return to the e-Manual screen, press the E-MANUAL

button.

How to search for a topic on the index page

✎

This function may not be supported depending on the language.

1. If you want to search a keyword, press the blue button to select Index.

2. Press the l or r button to select a character order you want.

3. Press the u or d button to select a keyword you want to see, and then press the ENTERE button.

4. You can view the corresponding e-Manual instruction screen.

✎

To close the Index screen, press the RETURN button.

[PH4500-SH]BN68-05773L-X0L04.indb 11 2014-01-29  10:42:34

English - 12

Teletext Feature

The index page of the Teletext service gives you information on how to use the service. For Teletext information to be

displayed correctly, channel reception must be stable. Otherwise, information may be missing or some pages may not

be displayed.

✎

You can change Teletext pages by pressing the numeric buttons on the remote control.

A

D/SUBT.

MEDIA

.

P

E-MANUA

L

AB CD

1

4

6

0

7

@

!

8

9

2

3

5

1

0 (mode): Selects the Teletext mode (LIST/FLOF). If pressed during LIST

mode, switches the mode to List save mode. In List save mode, you can

save a Teletext page into a list using the 8(store) button.

2

/ (Full TTX/Double TTX/mix/off): Activates the Teletext mode for the

current channel. Press the button twice to overlap the Teletext mode with the

current broadcasting screen. Press it one more time to exit teletext.

3

1 (sub-page): Displays the available sub-page.

4

8 (store): Stores the Teletext pages.

5

6 (index): Displays the index (contents) page at any time while you are

viewing Teletext.

6

4 (size): Displays the teletext on the upper half of the screen in double-size.

To move the text to the lower half of the screen, press it again. For normal

display, press it once again.

7

9 (hold): Holds the display at the current page, in the case that there are

several secondary pages that follow automatically. To undo, press it again.

8

2 (page up): Displays the next Teletext page.

9

3 (page down): Displays the previous Teletext page.

0

5 (reveal): Displays the hidden text (answers to quiz games, for example).

To display the normal screen, press it again.

!

7 (cancel): Shrinks the Teletext display to overlap with the current

broadcast.

@

Colour buttons (red, green, yellow, blue): If the FASTEXT system is used by

the broadcasting company, the different topics on a Teletext page are colour-

coded and can be selected by pressing the coloured buttons. Press the

colour corresponding to the topic of your choice. A new colour coded page

is displayed. Items can be selected in the same way. To display the previous

or next page, press the corresponding coloured button.

The Teletext pages are organized according to six categories

Part Contents

A

E

F

B C D

A Selected page number.

B Broadcasting channel identity.

C Current page number or search indications.

D Date and time.

E Text.

F Status information. FASTEXT information.

[PH4500-SH]BN68-05773L-X0L04.indb 12 2014-01-29  10:42:34

English

English - 13

Troubleshooting

If the TV seems to have a problem, ﬁrst try this list of possible problems and solutions. If none of these troubleshooting

tips apply, visit “www.samsung.com”, then click on Support, or call Samsung customer service centre.

Issues Solutions and Explanations

Picture Quality

First of all, please perform the Picture Test and conﬁrm that your TV is properly displaying test image. (go to

MENU - Support - Self Diagnosis - Picture Test) If the test image is properly displayed, the poor picture may

caused by the source or signal.

The TV image does not look as

good as it did in the store.

• If you have an analogue cable/set top box, upgrade to a digital set top box. Use HDMI or Component cables

to deliver HD (high deﬁnition) picture quality.

• Cable/Satellite subscribers: Try HD stations from the channel line up.

• Aerial connection: Try HD stations after performing Auto tuning.

• Many HD channels are up scaled from SD (Standard Deﬁnition) contents.

• Adjust the Cable/Set top box video output resolution to 1080i or 720p.

• Make sure you are watching the TV at the minimum recommended distance based on the size and deﬁnition

of the signal.

The picture is distorted:

macroblock error, small block,

dots, pixelization

• Compression of video contents may cause picture distortion especially in fast moving pictures such as sports

and action movies.

• Low signal level or bad quality can cause picture distortion. This is not a TV issue.

• Mobile phones used close to the TV (cca up to 1m) may cause noise in picture on analogue and digital TV.

Colour is wrong or missing.

• If you’re using a component connection, make sure the component cables are connected to the correct

jacks. Incorrect or loose connections may cause colour problems or a blank screen.

There is poor colour or brightness.

• Adjust the Picture options in the TV menu. (go to Picture Mode / Colour / Brightness / Sharpness)

• Adjust Energy Saving option in the TV menu. (go to MENU - System - Eco Solution - Energy Saving)

• Try resetting the picture to view the default picture settings. (go to MENU - Picture - Reset Picture)

There is a dotted line on the edge

of the screen.

• If the picture size is set to Screen Fit, change it to 16:9.

• Change cable/satellite box resolution.

The picture is black and white.

• If you are using an AV composite input, connect the video cable (yellow) to the Green jack of component

input 1 on the TV.

When changing channels, the

picture freezes or is distorted or

delayed.

• If connected with a cable box, please try to reset the cable box. Reconnect the AC cord and wait until the

cable box reboots. It may take up to 20 minutes.

• Set the output resolution of the cable box to 1080i or 720p.

Sound Quality

First of all, please perform the Sound Test to conﬁrm that your TV audio is properly operating. (go to MENU -

Support - Self Diagnosis - Sound Test)

If the audio is ok, the sound problem may be caused by the source or signal.

There is no sound or the sound is

too low at maximum volume.

• Please check the volume of the device (Cable/Sat Box, DVD, Blu-ray etc) connected to your TV.

The picture is good but there is

no sound.

• Set the Speaker Select option to TV Speaker in the sound menu.

• If you are using an external device, make sure the audio cables are connected to the correct audio input

jacks on the TV.

• If you are using an external device, check the device’s audio output option (ex. you may need to change your

cable box’s audio option to HDMI when you have a HDMI connected to your TV).

• Reboot the connected device by reconnecting the device’s power cable.

The speakers are making an

inappropriate noise.

• Check the cable connections. Make sure a video cable is not connected to an audio input.

• For aerial or cable connections, check the signal strength. Low signal level may cause sound distortion.

[PH4500-SH]BN68-05773L-X0L04.indb 13 2014-01-29  10:42:34

English - 14

Issues Solutions and Explanations

No Picture, No Video

The TV will not turn on.

• Make sure the AC power cord is securely plugged in to the wall outlet and the TV.

• Make sure the wall outlet is working.

• Try pressing the POWER button on the TV to make sure the problem is not the remote. If the TV turns on,

refer to “The remote control does not work” below.

The TV turns off automatically.

• Ensure the Sleep Timer is set to Off in the Time menu.

• If your PC is connected to the TV, check your PC power settings.

• Make sure the AC power cord is plugged in securely to the wall outlet and the TV.

• When watching TV from an aerial or cable connection, the TV will turn off after 10 ~ 15 minutes if there is no

signal.

There is no picture/video.

• Check cable connections (remove and reconnect all cables connected to the TV and external devices).

• Set your external device’s (Cable/Set top Box, DVD, Blu-ray etc) video outputs to match the connections to

the TV input. For example, if an external device’s output is HDMI, it should be connected to an HDMI input

on the TV.

• Make sure your connected devices are powered on.

• Be sure to select the TV’s correct source by pressing the SOURCE button on the remote control.

• Reboot the connected device by reconnecting the device’s power cable.

Aerial (Air/Cable) Connection

The TV is not receiving all

channels.

• Make sure the Aerial cable is connected securely.

• Please try Setup (Initial setup) to add available channels to the channel list. Go to MENU - System - Setup

(Initial setup) and wait for all available channels to be stored.

• Verify the Aerial is positioned correctly.

The picture is distorted: macro

block error small block, dots,

pixelization

• Compression of video contents may cause picture distortion, especially on fast moving pictures such as

sports and action movies.

• A low signal can cause picture distortion. This is not a TV issue.

Others

The picture will not display in full

screen.

• HD channels will have black bars on either side of the screen when displaying up scaled SD (4:3) contents.

• Black bars on the top and bottom will appear during movies that have aspect ratios different from your TV.

• Adjust the picture size options on your external device or TV to full screen.

Plasma TV is making humming

noise.

• Plasma TVs typically make a soft humming sound. This is normal. It’s caused by the electrical charges that

are used to create the images on the screen.

• If the humming sound is loud, you may have set the brightness on the TV too high. Try setting the brightness

lower.

• You can also have loud humming if the back of your Plasma TV is too close to a wall or other hard surface.

Also try rerouting your connection cables.

• Improper installation of wall mount can create excessive noise.

Image Retention (Burn In) Issue.

• To minimize the possibility of screen burn, this unit is equipped with Pixel Shift screen burn reduction

technology. Pixel Shift lets you set the picture so it moves slightly up and down (Vertical Line) and side to side

(Horizontal Dot). The regular, slight movement of the picture reduces screen burn in.

The remote control does not work.

• Replace the remote control batteries with the poles (+/–) in the right direction.

• Clean the sensor’s transmission window on the remote.

• Try pointing the remote directly at the TV from 1.5~1.8 m away.

The cable/set top box remote

control doesn’t turn the TV on or

off, or adjust the volume.

• Programme the Cable/Set top box remote control to operate the TV. Refer to the Cable/Set top box user

manual for the SAMSUNG TV code.

A “Mode Not Supported”

message appears.

• Check the supported resolution of the TV, and adjust the external device’s output resolution accordingly.

There is a plastic smell from the

TV.

• This smell is normal and will dissipate over time.

The TV Signal Information is

unavailable in the Self Diagnosis

Test menu.

• This function is only available with digital channels from an Aerial / RF / Coax connection.

TV is tilted to the right or left side. • Remove the stand base from the TV and reassemble it.

There are difﬁculties assembling

the stand base.

• Make sure the TV is placed on a ﬂat surface. If you can not remove the screws from the TV, please use a

magnetized screw driver.

The Broadcasting menu is grey

out (unavailable).

• The Broadcasting menu is only available when the TV source is selected.

[PH4500-SH]BN68-05773L-X0L04.indb 14 2014-01-29  10:42:34

English

English - 15

Issues Solutions and Explanations

Your settings are lost after 30

minutes or every time the TV is

turned off.

• If the TV is in the Store Demo mode, it will reset audio and picture settings every 30 minutes. If you want to

change the settings from Store Demo mode to Home Use, press the SOURCE button to select TV mode,

and go to MENU → Support → Use Mode.

You have intermittent loss of audio

or video.

• Check the cable connections and reconnect them.

• Loss of audio or video can be caused by using overly rigid or thick cables. Make sure the cables are ﬂexible

enough for long term use. If mounting the TV to the wall, we recommend using cables with 90 degree

connectors.

You see small particles when you

look closely at the edge of the

frame of the TV.

• This is part of the product’s design and is not a defect.

The PIP menu is not available. • PIP functionality is only available when you are using a HDMI or components source.

You turned the TV off 45 minutes

ago, and it turned on again.

• It is normal. The TV operates the OTA (Over The Aerial) function itself to upgrade ﬁrmware downloaded whilst

your watching TV.

The message “Scrambled Signal”

or “Weak or No Signal” appears.

• If you are using a CAM CARD (CI/CI+), check that it is installed into the common interface slot.

• If there is still a problem, pull the CAM CARD out of the TV and insert it into the slot again.

There are recurrent picture/sound

issues.

• Check and change the signal/source.

A reaction may occur between the

rubber cushion pads on the base

stand and the top ﬁnish of some

furniture.

• To prevent this, use felt pads on any surface of the TV that comes in direct contact with furniture.

The message “This ﬁle may not

be playable properly.” appears.

• This may appear because of high bit rate of content. Content generally will play but could experience some

playability issue.

✎

You can keep your TV in optimum operating condition by upgrading to the latest firmware (www.samsung.com →

support) by USB.

[PH4500-SH]BN68-05773L-X0L04.indb 15 2014-01-29  10:42:34

English - 16

Installing the Wall Mount

The wall mount kit (sold separately) allows you to mount the TV on the wall. For detailed information on installing the wall

mount, see the instructions provided with the wall mount. Contact a technician for assistance when installing the wall

mount bracket. We do not advice you to do it yourself.

Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if you select to

install the TV on your own.

Wall Mount Kit Speciﬁcations (VESA)

✎

Wall mount kit is not supplied but sold separately.

✎

Install your wall mount on a solid wall perpendicular to the floor. When attaching to other building materials, please

contact your nearest dealer. If installed on a ceiling or slanted wall, it may fall and result in severe personal injury.

✎

NOTE

• Standard dimensions for wall mount kits are shown in the table below.

• When purchasing our wall mount kit, a detailed installation manual and all parts necessary for assembly are

provided.

• Do not use screws that do not comply with the VESA standard screw speciﬁcations.

• Do not use screws longer than the standard dimension, as they may cause damage to the inside of the TV set.

• For wall mounts that do not comply with the VESA standard screw speciﬁcations, the length of the screws may

differ depending on their speciﬁcations.

• Do not fasten the screws too strongly, this may damage the product or cause the product to fall, leading to

personal injury. Samsung is not liable for these kinds of accidents.

• Samsung is not liable for product damage or personal injury when a non-VESA or non-speciﬁed wall mount is

used or the consumer fails to follow the product installation instructions.

• Do not exceed 15 degrees tilt when mounting this TV.

inches VESA Spec. (A * B) Standard Screw Quantity

43 400 X 400

M8 4

60 ~ 64 600 X 400

Do not install your Wall Mount Kit while your TV is turned on. It may result in personal injury due to electric

shock.

[PH4500-SH]BN68-05773L-X0L04.indb 16 2014-01-29  10:42:34

English

English - 17

Securing the TV to the Wall

Caution: Pulling, pushing, or climbing on the TV may cause the TV to fall. In particular,

ensure your children do not hang on or destabilize the TV. Doing so may cause the TV to tip

over, causing serious injuries or death. Follow all safety precautions provided in the Safety

Flyer included with your TV. For added stability and safety, you can purchase and install the

anti-fall device as described below.

To avoid the TV from falling

1. Put the screws into the clamps and ﬁrmly fasten them onto the wall.

Conﬁrm that the screws have been ﬁrmly installed onto the wall.

✎

You may need additional material such as an anchor

depending on the type of wall.

✎

Since the necessary clamps, screws, and string are not

supplied, please purchase these additionally.

2. Remove the screws from the centre back of the TV, put the screws

into the clamps, and then fasten the screws onto the TV again.

✎

Screw Specifications

• For a 43 ~ 64 inches: M8

3. Connect the clamps ﬁxed onto the TV and the clamps ﬁxed onto

the wall with a strong string and then tie the string tightly.

✎

NOTE

• Install the TV near to the wall so that it does not fall backwards.

• It is safe to connect the string so that the clamps ﬁxed on the wall are equal to or lower than the clamps ﬁxed on

the TV.

• Untie the string before moving the TV.

4. Verify all connections are properly secured. Periodically check connections for any sign of fatigue for failure. If you

have any doubt about the security of your connections, contact a professional installer.

• The product colour and shape may

vary depending on the model.

Wall

[PH4500-SH]BN68-05773L-X0L04.indb 17 2014-01-29  10:42:35

English - 18

Securing the Installation Space

Keep the required distances between the product and other objects (e.g. walls) to ensure proper ventilation.

Failing to do so may result in ﬁre or a problem with the product due to an increase in the internal temperature of the

product.

✎

When using a stand or wall-mount, use parts provided by Samsung Electronics only.

• If you use parts provided by another manufacturer, it may result in a problem with the product or an injury due to

the product falling.

✎

The appearance may differ depending on the product.

✎

Be careful when you contact the TV because some parts can be somewhat hot.

Installation with a stand. Installation with a wall-mount.

10 cm

Storage and Maintenance

✎

If you remove the attached sticker on the TV screen, clean the residues and then watch TV.

✎

The exterior and screen of the product can get scratched during cleaning. Be sure to wipe the exterior and screen

carefully using a soft cloth to prevent scratches.

Do not spray water directly onto the product. Any liquid

that goes into the product may cause a failure, ﬁre, or

electric shock.

Clean the product with a soft cloth dampened with a

small amount of water. Do not use a ﬂammable liquid (e.g.

benzene, thinners) or a cleaning agent.

[PH4500-SH]BN68-05773L-X0L04.indb 18 2014-01-29  10:42:35

English

English - 19

Anti-theft Kensington Lock

The Kensington Lock is not supplied by Samsung. It is a device used to physically ﬁx the system when using it in a

public place. The appearance and locking method may differ from the illustration depending on the manufacturer. Refer

to the manual provided with the Kensington Lock for additional information on proper use.

✎

Please find a “K” icon on the rear of the TV. A kensington slot is beside the “K” icon.

✎

The position and colour may differ depending on the model.

To lock the product, follow these steps:

1. Wrap the Kensington lock cable around a large, stationary object such as desk or chair.

2. Slide the end of the cable with the lock attached through the looped end of the Kensington lock cable.

3. Insert the locking device into the Kensington slot on the product.

4. Lock the lock.

✎

These are general instructions. For exact instructions, see the User manual supplied with the locking device.

✎

The locking device has to be purchased separately.

[PH4500-SH]BN68-05773L-X0L04.indb 19 2014-01-29  10:42:35

English - 20

Speciﬁcations

Environmental

Considerations

Operating Temperature

Operating Humidity

Storage Temperature

Storage Humidity

10°C to 40°C (50°F to 104°F)

10% to 80%, non-condensing

-20°C to 45°C (-4°F to 113°F)

5% to 95%, non-condensing

Sound (Output)

10 W X 2

Model Name

PA43H4500

Display Resolution

1024 x 768

Screen Size

43 inches

Dimensions (W x H x D)

Body

With stand

1009.7 x 617.5 x 55.7 mm

1009.7 x 698.8 x 235.0 mm

Weight

Without Stand

With Stand

13.60 kg

15.00 kg

Model Name

PA60H5000 PA64H5000

Display Resolution

1920 X 1080 (Black&White)

Stand Swivel (Left / Right)

-20˚ ~ 20˚

Screen Size

60 inches 64 inches

Dimensions (W x H x D)

Body

With stand

1388.3 x 823.3 x 55.7 mm

1388.3 x 924.1 x 375.5 mm

1478.0 x 870.0 x 55.7 mm

1478.0 x 967.0 x 375.5 mm

Weight

Without Stand

With Stand

26.70 kg

29.30 kg

32.20 kg

34.80 kg

✎

Design and specifications are subject to change without prior notice.

✎

For information about power supply, and more about power consumption, refer to the label attached to the

product.

[PH4500-SH]BN68-05773L-X0L04.indb 20 2014-01-29  10:42:35

Page is loading ...

Samsung PA51H4500AW, PA43H4500AW, PA60H5000AW, PS43F4500AW, PS51F4500AW Quick start guide

Related papers

Other documents