Mace MacePro MPC-VD-2812 User manual

Mace
Brand
Mace
Model
MacePro MPC-VD-2812
Category
Security cameras
Type
User manual
Thank you for purchasing a MacePro™ MPC-VD-0650 Camera. Please read the
instrucons completely before installaon. Please consult a legal expert on the
proper use of this equipment in accordance with the law.
User Guide
MacePro
™
True Day/Night Vandal
Resistant Color Dome Camera
MPC-VD-0650
144.3 mm
115.0 mm
8.0 mm
2 — Mace
®
Security Products, Inc.
3
SAFETY PRECAUTIONS
Please read before using
The lightning ash with arrowhead symbol, within an equilateral triangle, is intended
to alert the user to the presence of insulated dangerous voltage within the product’s
enclosure that may be sucient magnitude to constute risk of electrical shock.
The exclamaon point within an equilateral triangle is intended to alert the user to
the presence of important operaon and maintenance (servicing) instrucons in the
literature accompanying the appliance.
FCC STATEMENT
WARNING
This device complies with Part 15 of the FCC Rules. Operaon is subject to the following
two condions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received including interference
that may cause undesired operaon.
* Federal Communicaons Commission (FCC) Statement
WARNING
This Equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protecon
against harmful interference in a residenal installaon. This equipment generates uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instrucons,
may cause harmful interference to radio communicaons. However, there is no guarantee that
interference will not occur in a parcular installaon. If this equipment does cause harmful
interference to radio or television recepon, which can be determined by turning the equipment
o and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
— Reorient or relocate the receiving antenna.
— Increase the separaon between the equipment and receiver.
— Connect the equipment into an outlet on a circuit dierent from that to which the
receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
* You are cauoned that changes or modicaons not expressly approved by the party
responsible for compliance could void your authority to operate the equipment.
• Users should not aempt to disassemble the camera. There are no user serviceable parts
inside. Ask qualied service personnel for servicing.
• Do not use strong solvents or detergents. Use a dry cloth on the camera when it is dirty.
• Before operang, please check proper temperature, humidity and power source rangs.
• Do not aim the camera at bright objects or place it in direct sunlight. This may result in
blooming or smearing.
4
INSTALLATION
1. Remove the camera dome cover.
2. Mount the dome body to a suitable surface using appropriate fasteners.
3. Aim camera using the 3-axis mounng system.
4. Connect the BNC video cable to the coax cable leading to the DVR or Monitor video input.
5. Connect the power cable.
6. Close the dome.
Note: The camera is supplied with the focus pre-set, however, lens focus
may be adjusted if needed.
POWER AND VIDEO OUTPUT JACK
A center pin posive barrel connector is available for AC or DC voltage (12vdc or 24vac).
A BNC connector provides an analog video output.
ZOOM
Adjust varifocal lens for correct depth of eld prior to closing dome housing.
FOCUS
Adjust focus prior to closing dome housing.
144.3 mm
115.0 mm
8.0 mm
5
144.3 mm
115.0 mm
8.0 mm
DIMENSIONS
6
SPECIFICATIONS | MPC-VD-0650
Image Sensor 1/3" SONY CCD
Eecve Pixels NTSC: 768(H) x 494(V); PAL: 752(H) x 582(V)
Resoluon 600 TV lines (Color)
Scanning System NTSC: 525 Lines / 60 Fields; PAL: 625 Lines / 50 Fields
S/N Rao More than 48 dB (AGC OFF)
Electronic Shuer Auto 1/60 (1/50) ~ 1/100,000 sec.
Minimum Illuminaon 0.5 lux color / f2.0
Video Output 1.0 Vp-p / 75� Composite, BNC
Lens Type 6.0 ~ 50 mm / f1.6
Power Source DC12V ±10% / AC24V, 2.1 mm Jack
Power Consumpon 5.3W / 220mA (max)
Weight 0.76 kg (NW) / 0.84 kg (GW)
Weather Resistant IP66 (when installed with weather-ght ng)
Operang Temperature 14ºF ~ 122ºF (-10ºC ~ 50ºC)
Storage Temperature -4ºF ~ 158ºF (-20ºC ~ 70ºC)
Regulatory Compliance CE, FCC
Dimensions 115 (H) x 144.3 (Diameter) mm
7Mace
®
Security Products, Inc. —
5101 NW 21st Ave, Suite 210 • Fort Lauderdale, FL 33309
www.mace.com • (877) 585-6223
0710A
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

Mace MacePro MPC-VD-2812 User manual

Mace
Brand
Mace
Model
MacePro MPC-VD-2812
Category
Security cameras
Type
User manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents