Franklin Brass 66224-CL Installation guide

Type
Installation guide
Replacement Towel Bar, 24"
Fits all ceramic and metal brackets.
Spring-loaded ends snap into place.
Replaces towel bar without
removing brackets.
24" cut to any length.
Easy to Install:
Cut and remove your present bar.1.
Measure distance between inner 2.
edges of brackets. FIG. 1
Remove end piece from one end 3.
of replacement bar.
Use fine tooth saw to cut replacement 4.
bar to 1/8" less than distance
between brackets. FIG. 2
Replace spring-loaded end 5.
piece into bar. FIG. 3
Compress ends and snap new 6.
bar into place.
Fig. 1
Fig. 2
Fig. 3
©2008 Liberty Hardware
®
Manufacturing Corporation, A MASCO COMPANY
140 Business Park Drive Winston-Salem, NC 27107
www.libertyhardware.com Made in China / Fabriqué en Chine / Hecho en China
66230-99
  • Page 1 1
  • Page 2 2
  • Page 3 3

Franklin Brass 66224-CL Installation guide

Type
Installation guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI