Moen T2113 Series User manual

Type
User manual
Specifications
CRITICAL DIMENSIONS
(DO NOT SCALE)
Rev. 4/08
THIN WALL APPLICATION
THICK WALL APPLICATION
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
7" (178mm)
ESCUTCHEON
DIAMETER
2" CC (51mm)
1 7/8" IPS (48mm)
MAX WALL
HOT
INLET
COLD
INLET
FINISHED WALL LINE
FACE OF STUD
4-1/2" (114mm)
WALL OPENING
FLOOR
45" (1143mm)/
48" (1219mm)-SHOWER
32" (813mm)-TUB OR
TUB SHOWER
7-1/2"
(191mm)
MIN.
TUB RIM
6'-6"
(1981mm)
L
C
1 3/8" (35mm)
2 1/2" MAX. (63mm)
1/2" MIN. CC (13mm)
5/8" MIN. IPS (16mm)
FLOOR LINE
1 3/8"
(35mm)
1 1/2"
(38mm)
3/16" (typ) (5mm)
PLASTER GROUND
3-1/2" (89mm) MAX.
2-1/4" (57mm) MIN.
DIAMETER
WALL
OPENING
PLASTIC
TUB/SHOWER
SURROUND
L
C
KINGSLEY
POSI-TEMP
®
Single-Handle Tub/Shower (Trim Only)
Models: T2113 series
FAUCET DESCRIPTION
Metal construction with various finishes identified by suffix
Includes showerhead, arm, flange and diverter spout
OPERATION
Handle operates counterclockwise through a 270º arc
with off at 6 o’clock and maximum hot at the 9 o’clock
position. Shut off in clockwise direction
Adjustable temperature limit stop to control maximum
hot water temperature
Pressure balancing mechanism maintains selected
discharge temperature to ± 2°
FLOW
Showerhead limited to 2.5 gpm (9.5 L/min)
CARTRIDGE
1222 cartridge design
Nonmetallic/nonferrous and stainless steel materials
Accommodates back to back installations
STANDARDS
Third party certified to ASME A112.18.1/CSA B-125.1,
ICC A117.1 and all applicable requirements referenced therein
ADA for lever handle
WARRANTY
Lifetime limited warranty against leaks, drips and finish
defects to the original consumer purchaser
5 year warranty if used in commercial installations
  • Page 1 1

Moen T2113 Series User manual

Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI