HP f2304 23-inch High Def LCD Monitor User manual

User’s Guide

HP f2304 High Definition 23” LCD Monitor

The information in this document is subject to change without notice.

Hewlett-Packard

®

Company makes no warranty of any kind with regard to this material,

including, but not limited to, the implied warranties of merchantability and fitness for a

particular purpose.

HP shall not be liable for errors contained herein or for incidental or consequential

damages in connection with the furnishing, performance, or use of this material.

THE WARRANTY TERMS CONTAINED IN THIS STATEMENT, EXCEPT TO THE EXTENT

LAWFULLY PERMITTED, DO NOT EXCLUDE, RESTRICT OR MODIFY AND ARE IN

ADDITION TO ANY MANDATORY STATUTORY RIGHTS APPLICABLE TO THE SALE OF

THIS PRODUCT OR SERVICE TO YOU.

HP assumes no responsibility for the use or reliability of its software on equipment that is

not furnished by HP.

This document contains proprietary information that is protected by copyright. All rights

are reserved. No part of this document may be photocopied, reproduced, or translated to

another language without the prior written consent of HP.

Hewlett-Packard Company

P.O. Box 4010

Cupertino, CA 95015-4010

USA

Hewlett-Packard is a registered trademark of Hewlett-Packard Company in the United

States of America and other countries/regions.

Å

WARNING: Text set off in this manner indicates that failure to

follow directions could result in bodily harm or loss of life.

Ä

CAUTION: Text set off in this manner indicates that failure to

follow directions could result in damage to equipment or

loss of information.

✎

Text set off in this manner indicates additional information.

User’s Guide iii

Contents

1 Product Features

2 Safety and Maintenance Guidelines

Important Safety Information . . . . . . . . . . . . . . . . 2–1

Maintenance Guidelines . . . . . . . . . . . . . . . . . . . 2–2

Cleaning the Monitor . . . . . . . . . . . . . . . . . . . . . 2–4

Shipping the Monitor . . . . . . . . . . . . . . . . . . . . . 2–4

3 Setting Up the Monitor

Selecting the Signal Connectors and Cable . . . . . . 3–5

Removing the Monitor Base . . . . . . . . . . . . . . . . . 3–5

Mounting the Monitor . . . . . . . . . . . . . . . . . . . . . 3–7

Removing the Side Panel . . . . . . . . . . . . . . . . . . . 3–7

Side Panel Connectors. . . . . . . . . . . . . . . . . . 3–8

Cable Management . . . . . . . . . . . . . . . . . . 3–10

4 Operating the Monitor

Installing the Information Files . . . . . . . . . . . . . . . 4–1

Using Monitor Buttons . . . . . . . . . . . . . . . . . . . . . 4–2

Adjusting Monitor Settings. . . . . . . . . . . . . . . . . . 4–5

Using the On-Screen Display . . . . . . . . . . . . . . . . 4–5

Using the Auto Adjustment Function. . . . . . . . . 4–8

Identifying Special OSD Messages . . . . . . . . . 4–8

Adjusting Screen Quality . . . . . . . . . . . . . . . . 4–9

Optimizing Digital Conversion . . . . . . . . . . . . 4–9

Using Video Connectors . . . . . . . . . . . . . . . . . . 4–10

iv User’s Guide

Contents

5 Troubleshooting

Solving Common Problems . . . . . . . . . . . . . . . . . 5–1

Getting Help Using the Worldwide Web . . . . . 5–3

Preparing to call Technical Support . . . . . . . . . 5–3

A Specifications

f2304 Flat Panel Monitor . . . . . . . . . . . . . . . . . . A–1

Recognizing Preset Display Resolutions . . . . . . A–3

LCD Monitor Quality and Pixel Policy

for f2304 Monitor. . . . . . . . . . . . . . . . . . . . . A–5

Entering User Modes . . . . . . . . . . . . . . . . . . . A–6

Using the Energy Saver Feature . . . . . . . . . . . A–7

B Agency Regulatory Notices

Federal Communications Commission Notice. . . . . B–1

Modifications . . . . . . . . . . . . . . . . . . . . . . . . B–2

Cables. . . . . . . . . . . . . . . . . . . . . . . . . . . . . B–2

Declaration of Conformity for Products

Marked with FCC Logo, United States Only. . . . . . B–2

Canadian Notice . . . . . . . . . . . . . . . . . . . . . . . . B–3

Avis Canadien . . . . . . . . . . . . . . . . . . . . . . . . . . B–3

European Notice . . . . . . . . . . . . . . . . . . . . . . . . B–3

Japanese Notice . . . . . . . . . . . . . . . . . . . . . . . . B–4

Korean Notice . . . . . . . . . . . . . . . . . . . . . . . . . . B–4

EPA Energy Star Compliance . . . . . . . . . . . . . . . . B–4

Power Cord Set Requirements . . . . . . . . . . . . . . . B–5

HP Recycling Program. . . . . . . . . . . . . . . . . . . . . B–6

C TCO ‘99 Requirements

User’s Guide 1–1

1

Product Features

The HP f2304 High Definition 23” LCD Monitor (liquid

crystal display) has an active matrix and a thin-film transistor

(TFT). The monitor features include:

■ Large wide screen 23-inch diagonal (58.4 cm) viewable

area display.

■ 1920 × 1200 resolution, plus full-screen support for

lower resolutions.

■ Wide viewing angle to allow viewing from a sitting or

astanding position.

■ Tilt adjustment capabilities.

■ Removable base for flexible mounting solutions.

■ Integrated stereo speakers.

1–2 User’s Guide

Product Features

■ Multiple video inputs supported:

❏ VGA analog

❏ DVI-I supports either analog or digital signal input

❏ S-video with composite video adapter included

❏ Component video for high definition video support

■ Video input includes PiP (Picture in Picture) option for

windowed video display over data display.

■ The high definition component video input supports

480i, 480p, 720p, and 1080i video format.

■ Audio support connections include a PC line-in

connector, RCA connectors for AV input, and a

headphone jack connector.

■ VGA and DVI signal cables included.

■ Plug and Play capability if supported by your system.

■ On-Screen Display (OSD) adjustments in English, Dutch,

French, Italian, Spanish, and German for ease of set-up

and screen optimization.

■ The User Guide CD includes an information file (INF),

Image Color Matching file (ICM), Auto Adjustment

software, Acrobat Reader software, and product

documentation.

■ Energy Saver feature for Energy Star

®

compliance.

■ Compliant with the following regulated specifications:

❏ EPA ENERGY STAR

❏ European Union CE Directives

❏ TCO ‘99 Requirements

❏ VESA VSIS standard

User’s Guide 2–1

2

Safety and Maintenance

Guidelines

Important Safety Information

A power cord is included with your monitor. If another

cord is used, use only a power source and connection

appropriate for this monitor. For information on the correct

power cord set to use with your monitor, refer to the “Power

Cord Set Requirements” section in Appendix B.

Å

WARNING: To reduce the risk of electric shock or damage to your

equipment, do not disable the power cord grounding feature. This

equipment is designed to be connected to a grounded (earthed)

power outlet that is easily accessible to the operator. The grounding

plug is an important safety feature.

Å

WARNING: For your safety, be sure that the power outlet you plug

the power cord into is easily accessible and located as close to the

equipment as possible. When you need to disconnect the power to

the equipment, unplug the power cord from the power outlet by

grasping the plug firmly. Never pull on the cord.

2–2 User’s Guide

Safety and Maintenance Guidelines

Ä

CAUTION: For the protection of your monitor, as well as your

computer, connect all power cords for your computer and its

peripheral devices (such as a monitor, printer, scanner) to some form

of surge protection device such as a power strip or Uninterruptible

Power Supply (UPS). Not all power strips provide surge protection;

the power strips must be specifically labeled as having this ability.

Use a power strip whose manufacturer offers a Damage

Replacement Policy so you can replace your equipment if surge

protection fails.

Maintenance Guidelines

To enhance the performance and extend the life of your

monitor:

■ Do not open your monitor cabinet or attempt to service

this product yourself. Adjust only those controls that

are covered in the operating instructions. If your monitor

is not operating properly, or has been dropped or

damaged, contact your HP authorized dealer, reseller,

or service provider.

■ Use only a power source and connection appropriate

for this monitor, as indicated on the label/back plate of

the monitor.

■ Be sure the total ampere rating of the products connected

to the outlet does not exceed the current rating of the

electrical outlet, and the total ampere rating of the

products connected to the cord does not exceed the

rating of the cord. Look on the power label to determine

the ampere rating (AMPS or A) for each device.

■ Install your monitor near an outlet that you can easily

reach. Disconnect the monitor by grasping the plug

firmly and pulling it from the outlet. Never disconnect

the monitor by pulling the cord.

Safety and Maintenance Guidelines

User’s Guide 2–3

■ Turn your monitor off when not in use. You can

substantially increase the life expectancy of your monitor

by using a screen saver program and turning off the

monitor when not in use.

■ Unplug your monitor from the wall outlet before

cleaning. Do not use liquid cleaners or aerosol cleaners.

Use a damp cloth for cleaning. If the screen requires

additional cleaning, use an antistatic screen cleaner.

Ä

CAUTION: Do not use benzene, thinner, ammonia, or any other

volatile substances to clean your monitor or the screen. These

chemicals may damage the cabinet finish as well as the screen.

■ Slots and openings in the cabinet are provided for

ventilation. These openings must not be blocked or

covered. Never push objects of any kind into cabinet

slots or other openings.

■ Do not drop your monitor or place it on an unstable

surface.

■ Do not allow anything to rest on the power cord. Do not

walk on the cord.

■ Keep your monitor in a well-ventilated area, away from

excessive light, heat, or moisture.

■ When removing the monitor base, you must lay the

monitor face down on a soft flat area to prevent it from

getting scratched, defaced, or broken.

2–4 User’s Guide

Safety and Maintenance Guidelines

Cleaning the Monitor

To clean the monitor, follow these steps:

1. Turn off the monitor and the computer.

2. Unplug the monitor.

3. Dust the monitor by wiping the screen and the cabinet

with a soft, clean cloth.

Ä

CAUTION: Do not use benzene, thinner, ammonia, or any volatile

substance to clean the monitor screen or cabinet. These chemicals

may damage the monitor. Never use water to clean an LCD screen.

If the screen requires additional cleaning, use a clean cloth

dampened with isopropyl alcohol.

Shipping the Monitor

Keep the original packing box. You may need it later if you

move or ship your monitor.

User’s Guide 3–1

3

Setting Up the Monitor

The f2304 monitor connects to your computer through an

analog connector (VGA) or a digital (DVI-D) connector.

Some video cards support a higher resolution through an

analog (VGA) connection than through a digital (DVI)

connection.

The f2304 monitor supports resolutions up to 1920 x 1200

for both analog and digital connections. Please see the

documentation that came with your PC or video card for

details regarding the video resolution settings supported by

your equipment.

✎

The DVI-D cable supplied with this monitor is for digital-

to-digital connection only. Your computer must have a

DVI-compatible graphics card installed for use with the DVI-D

signal cable. When connecting the DVI-D signal cable to the

DVI connector on the monitor, you must connect the other

end of the DVI-D cable to the DVI connector on the computer.

To set up the monitor, ensure that the power is turned off to

the monitor, computer system, and other attached devices,

then follow these steps:

1. Place the monitor in a convenient, well-ventilated

location near your computer.

✎

Your f2304 monitor may have been shipped with the VGA

cable attached. This cable may be detached if you want to

use only a DVI cable instead.

3–2 User’s Guide

Setting Up the Monitor

2. Connect one end of the VGA monitor signal cable to the

VGA video connector on the rear panel of the computer,

and the other end to the back of the monitor.

Or

Connect one end of the DVI-I monitor signal cable to the

DVI-I video connector on the rear panel of the computer,

and the other end to the back of the monitor.

Setting Up the Monitor

User’s Guide 3–3

Å

WARNING: To reduce the risk of electric shock or damage to your

equipment: Do not disable the power cord grounding plug. The

grounding plug is an important safety feature.

Plug the power cord into a grounded (earthed) electrical outlet that is

easily accessible at all times.

Disconnect power from the monitor by unplugging the power cord

from the electrical outlet.

Do not place anything on power cords or cables. Arrange them so

that no one may accidentally step on or trip over them. Do not pull

on a cord or cable. When unplugging from the electrical outlet,

grasp the cord by the plug.

3. Connect the power cable to the back of the monitor and

connect the other end to an electrical wall outlet.

3–4 User’s Guide

Setting Up the Monitor

4. Remove side panel. See “Removing the Side Panel” on

page 3-7. Connect the speakers cable to the PC Audio In

connector on the monitor and then connect the other end

to the Audio Out connector on the back of the PC.

5. Adjust the monitor as needed for your comfort using the

monitor’s tilt adjustment capabilities.

-5º

20º

Setting Up the Monitor

User’s Guide 3–5

Å

WARNING: Burn-in image damage may occur on monitors that

display the same static image on screen for a prolonged period of

time. To avoid burn-in image damage on your monitor screen, you

should always activate a screen saver application or turn off the

monitor when it is not in use for a prolonged period of time.

Selecting the Signal Connectors

and Cable

There are five signal input connectors: one VGA connector,

one DVI-I connector, one S-video connector, two RCA audio

connectors, and a PC Audio In connector. The monitor will

automatically determine at power-on which inputs have valid

video signals. The inputs can be selected via the On-Screen

Display (OSD) feature or by pressing the Input button on the

monitor’s front bezel.

The video mode supported by the DVI-I connector is

determined by the video cable used. For digital operation,

use the DVI-D to DVI-D signal cable provided.

Removing the Monitor Base

You can remove the monitor base to mount the monitor on a

wall, swing arm, or other mounting fixture. Read the caution

and warning statements below before beginning the

procedure.

Ä

CAUTION: Before beginning to disassemble the monitor, be sure

the monitor is turned off and the power and all signal cables are

disconnected.

Å

WARNING: Before removing the base from the monitor, lay the

monitor flat with the front bezel down. Attempting to remove the

base from an upright monitor may result in injury to the user.

3–6 User’s Guide

Setting Up the Monitor

Ä

CAUTION: Ensure that the front bezel of the monitor is positioned

over a flat table or desktop to prevent it from getting scratched,

defaced, or broken when removing the base from the monitor.

To remove the monitor base:

1. Disconnect and remove the signal and power cables

from the back of the monitor.

2. Lay the monitor face down on a flat area.

3. Remove the back panel by gently pulling on the handle

and then slowly easing the tabs around the panel out of

the tab slots.

4. Remove the four screws from the monitor base as shown

in the following illustration.

5. Remove the monitor base from the monitor.

Setting Up the Monitor

User’s Guide 3–7

Mounting the Monitor

1. Remove the monitor base. Refer to “Removing the

Monitor Base” steps in the previous section.

2. With the base is removed, use the four threaded screw

holes on the monitor panel to mount the monitor. The

mounting holes are spaced 4 inches (10.2 cm) apart.

✎

Mount the monitor to a swing arm or other mounting fixture

by following the instructions included with the mounting

fixture to be used.

Removing the Side Panel

On the back of the f2304 monitor there are several

connectors behind the side panel.

To remove the side panel:

1. Gently pull on the edge of the side panel.

2. Slowly ease the tabs around the side panel out of the tab

slots as shown in the following illustration.

3–8 User’s Guide

Setting Up the Monitor

Side Panel Connectors

A

B

C

D

E

F

G

Label

Connector

Color Function

A Y Green High-Definition Component

Video Input

Connects to the video component output of a

DVD player or set-top box. The f2304 monitor

is capable of displaying video from 480i,

480p, 720p, and 1080i sources.

B P

b

Blue

C P

r

Red

D S-VIDEO

IN

Black S-video Input connects to an S-video output

device, such as console game, set-top box,

VCR, or DVD player.

✎

A composite cable can be attached

to the S-video input using the

supplied composite-to-S-video

adapter.

Setting Up the Monitor

User’s Guide 3–9

E RRed Right/Left RCA audio line-in connects to

an audio source, such as a console game,

set-top box, VCR, or DVD player. When

component or S-video input is selected from

the onscreen display, audio will be used from

this source.

F LWhite

G Lime Green PC Audio In connects to audio from a PC

source. When VGA or DVI input is selected,

audio will be used from this source.

Label

Connector

Color Function

3–10 User’s Guide

Setting Up the Monitor

Cable Management

The f2304 monitor is designed to help you organize your

monitor cables in one area. The power cord, the VGA, and DVI

cables can be threaded through the hole in the back of the

monitor stand and positioned over the two hooks on the inside of

the monitor stand, located through the back opening. Similarly,

the cables you connect to the back side of your monitor can be

threaded through the bottom of the side door and looped

through the same opening on the back of the monitor.

Page is loading ...

HP f2304 23-inch High Def LCD Monitor User manual

This manual is also suitable for

HP f2304 23-inch High Def LCD Monitor User manual

Related papers

Other documents