ZALMAN ZM-CS1 Datasheet

Notice

Zalman Tech Co., Ltd. Is not responsible for any damages due to external causes, including but not

limited to, improper use, problems with electrical power, accident, neglect, alteration, repair, improper

installation, or improper testing.

The Clip Support should be positioned such that the

socket lever can be fully pulled back into the indent

on the inner side of the Clip Support.

Bolt

Clip Support

Nipple

Washer

LGA 775

othe

oard

Key Features

This Clip Support allows the installation of CNPS7000 series onto Socket 775

Specifications

1) Weight : 38g

2) Dimensions : 81(L) X 85(W) X 14.4(H)mm

3) Material : Anodized Aluminum, Brass

4) Compatible Products : CNPS7000-Cu / CNPS7000A-Cu / CNPS7000B-Cu

CNPS7000-AlCu / CNPS7000A-AlCu / CNPS7000B-AlCu

Cautions

1) Make sure the indent on the inner side of the Clip Support is positioned correctly.

2) The Washers must be in place when installing the Nipples.

3) Install CNPS7000(A/B) using the bolts included with this package.

CNPS7000 Series Clip Support for Socket 775 (Model : ZM-CS1)

CPU