Thank you for purchasing an Uttermost lamp. We hope you are as

proud to display this lamp as we were to make it.

• Each lamp is hand nished one at a time, therefore no two are exactly alike.

• Remove the wrapping on the lamp shade, scissors will help, but be careful not to damage the shade.

• The Uttermost nial disk is to be placed on the top of the shade spider, under the nal, as shown in the diagram.

Again, thank you for purchasing an Uttermost lamp.

Assembly Instructions

1. Place harp onto saddle, then place the shade onto the harp.

2. Place shade onto Uttermost nal disk, then fasten nial onto harp to x shade.

PO BOX 558/3325 GRASSY HILL RD. ROCKY MOUNT, VIRGINIA 24151

www.uttermost.com

UTTERMOST

Harp

Saddle

Again, thank you for purchasing an Uttermost lamp.

Assembly Instructions

1. Place harp onto saddle, then place the shade onto the harp.

2. Place shade onto Uttermost nal disk, then fasten nial onto harp to x shade.

Important Safety Instructions

This portable lamp has a polarized plug ( one blade is wider than the other ). As a safety

feature, this plug will t in a polarized outlet only one way. If the plug does not t fully

in the outlet, reverse the plug. If it still does not t, contact a qualied electrician.

Never use with an extension cord unless plug can be fully inserted. Do not attempt

to defeat this safety feature.