Omega CDTX680 Series Owner's manual

Type
Owner's manual

The Omega CDTX680 Series Contacting Conductivity Two-wire Transmitter is a loop-powered device that uses a CDE680 series enhanced performance contacting conductivity sensor to measure conductivity in solutions. It can be used with sensors that have a 0.05, 0.5, or 10.0 cell constant. The measuring range of this transmitter is factory-set to a user-specified range, but can be changed in the field if desired. Some of the features of this transmitter include:

  • Automatic temperature compensation from 32 to 212°F (0 to 100°C) with an adjustable slope from 0 to 4% per °C
  • 0.1% of span sensitivity and 0.1% of span or better repeatability

The Omega CDTX680 Series Contacting Conductivity Two-wire Transmitter is a loop-powered device that uses a CDE680 series enhanced performance contacting conductivity sensor to measure conductivity in solutions. It can be used with sensors that have a 0.05, 0.5, or 10.0 cell constant. The measuring range of this transmitter is factory-set to a user-specified range, but can be changed in the field if desired. Some of the features of this transmitter include:

  • Automatic temperature compensation from 32 to 212°F (0 to 100°C) with an adjustable slope from 0 to 4% per °C
  • 0.1% of span sensitivity and 0.1% of span or better repeatability
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23

Omega CDTX680 Series Owner's manual

Type
Owner's manual

The Omega CDTX680 Series Contacting Conductivity Two-wire Transmitter is a loop-powered device that uses a CDE680 series enhanced performance contacting conductivity sensor to measure conductivity in solutions. It can be used with sensors that have a 0.05, 0.5, or 10.0 cell constant. The measuring range of this transmitter is factory-set to a user-specified range, but can be changed in the field if desired. Some of the features of this transmitter include:

  • Automatic temperature compensation from 32 to 212°F (0 to 100°C) with an adjustable slope from 0 to 4% per °C
  • 0.1% of span sensitivity and 0.1% of span or better repeatability

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI