Strong SM-ADP-M-400X400 Owner's manual

Type
Owner's manual
SM-ADP-M-400X400
Strong™ Mount Adapter Plates for Converting
200mm x 200mm VESA up to 400mm x 400mm VESA (Black)
PARTS INCLUDED
(2) Adapter Brackets
(4) Nylock Nuts
(4) Metal Washers
TOOLS REQUIRED
Socket Wrench with 13mm
or 1/2” Socket head
INSTALLATION
Attach the two Strong™
Adapter Brackets to the
Mount Head using the
four Metal Washers and
four Nylock Nuts. Tighten
the Nylock Nuts so the
Adapter Brackets are
securely attached.
Note: The studs on the
adapter plate should
face away from the TV.
Lifetime Limited Warranty
Strong™ Mounts have a Lifetime Limited Warranty. This warranty includes parts and labor repairs on all
components found to be defective in material or workmanship under normal conditions of use. This
warranty shall not apply to products which have been abused, modied or disassembled. Products to be
repaired under this warranty must be returned to SnapAV or a designated service center with prior notication
and an assigned return authorization number (RA).
For Technical Support call 1.866.838.5052
  • Page 1 1

Strong SM-ADP-M-400X400 Owner's manual

Type
Owner's manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI