Strong SM-ADP-M-400X400 Owner's manual

SM-ADP-M-400X400

Strong™ Mount Adapter Plates for Converting

200mm x 200mm VESA up to 400mm x 400mm VESA (Black)

PARTS INCLUDED

(2) Adapter Brackets

(4) Nylock Nuts

(4) Metal Washers

TOOLS REQUIRED

Socket Wrench with 13mm

or 1/2” Socket head

INSTALLATION

Attach the two Strong™

Adapter Brackets to the

Mount Head using the

four Metal Washers and

four Nylock Nuts. Tighten

the Nylock Nuts so the

Adapter Brackets are

securely attached.

Note: The studs on the

adapter plate should

face away from the TV.

Lifetime Limited Warranty

Strong™ Mounts have a Lifetime Limited Warranty. This warranty includes parts and labor repairs on all

components found to be defective in material or workmanship under normal conditions of use. This

warranty shall not apply to products which have been abused, modied or disassembled. Products to be

repaired under this warranty must be returned to SnapAV or a designated service center with prior notication

and an assigned return authorization number (RA).

For Technical Support call 1.866.838.5052