TA154 - POWERMAX SLED
Assembly Instructions
10-02-15
TA154_INST
Copyright © 2015 by Litania Sports Group, Inc.
All rights reserved.
www.powermaxequipment.com
855-232-4666
Tools:
•#3 Phillips Head Screwdriver
•13mm wrench or socket
Assembly Instructions:
1. Remove from packaging
2. Line up the holes in the weight post base with the holes in
the sled and tighten down with included hardware.
3. Connect one end of each lead strap to the metal loop (A)
at the front of the runners using the carabiners.
Flat head screw
(M8x20)
Nylock nut (M8)
Flat washer (M8)
A
WARNING: Cancer and Reproductive Harm –
For more information go to www.p65warnings.ca.gov
F