DeWitt DWT-BT2.75-100YD User guide

Type
User guide
Weeding maintanence beneath shrubs and
plants can be time consuming, hard work and difficult. Bushes and small shrubs that are weed free
are healthier plants and require less plant bed maintenance. Landscape fabric stops weeds without
chemicals while allowing moisture and nutrients to pass through. Installing the fabric properly doesn't
disturb the existing bushes or take a significant time investment, but it does provide an optimum
weed barrier that can conserve water by design.
Stone, pavers and crushed rock are excellent as groundcovers in land-
scapes for their low-maintenance, durability and attractiveness. Their lasting quality makes them ideal for
use in foundation plantings ,walkways or driveway material. Properly installing landscape fabric before
applying rocks over the area will effectively suppress weeds and prevent rocks and soil from mixing.
Installing Weed Barrier Fabric
Around Shrubs and Plants:
Under Pathways:
CLEAN & RAKE
Remove weeds from
desired area and rake
ground smooth.
Remove grass and
weeds from desired
area and level soil
surface from high
and low spots.
1
ANCHOR & SECURE
For best results,
secure fabric with
DeWitt Anchor Pins.
ANCHOR & SECURE
Secure the fabric tightly
with DeWitt Anchor Pins
at regular intervals, es-
pecially along seams
and edges.
3
CUT & PLACE
Place fabric around
existing plants, or cut
an X to install plants.
CUT & PLACE
Lay fabric making
sure any overlap is
at least 6 to 8 inches
and leave extra fabric
along border.
2
COVER & ENJOY
Cover area with bark,
mulch or your choice
of decorative stone.
COVER FABRIC
Cover entire path
area with stone, pav-
ers, gravel or any
inorganic material of
your choice.
4
2
43
1DETERMINE PATH AREA
  • Page 1 1

DeWitt DWT-BT2.75-100YD User guide

Type
User guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI