Grundig Varixx UMS 4401 SPCD User manual

ǵ

MICRO

HIFI SYSTEM

Varixx

UMS 4401 SPCD

DEUTSCH

ENGLISH

FRANÇAIS

ITALIANO

01 UMS 4401 SPCD, D 07.07.2004 14:58 Uhr Seite 1

2

CONTENTS________________________________________________________________________

4 Set-up and safety

5 Overview

The hi-fi system controls

The hi-fi system displays

The back of the hi-fi system

The remote control

15 Connection and preparation

Connecting the antennas

Connecting the loudspeakers

Connecting the headphones

Connecting the mains cable

Inserting batteries in the remote control

Additional information for units sold in the UK.

17 Settings

Setting the time

Setting and storing radio stations

20 General functions

23 Tuner mode

Selecting the tuner input source

Selecting the preset position

Stereo/mono reception

RDS station service

02 UMS 4401 SPCD, GB 07.07.2004 14:35 Uhr Seite 2

CONTENTS__________________________________________________________________________________

ENGLISH

3

27 CD mode

Basic CD mode functions

Special CD mode features

Creating a track memory – playing back files or tracks in selected order

37 Tape mode

General information about tape mode

Playback

Fast forwarding and rewinding the tape

Recording

Synchro recording from a CD

41 Timer mode

Switch-on timer

Sleep timer

44 Information

Cleaning the CD unit

Cleaning the tape drive

Technical data

Troubleshooting

02 UMS 4401 SPCD, GB 07.07.2004 14:35 Uhr Seite 3

4

SET-UP AND SAFETY ______________________________________________

Please note the following information when setting up the system:

The hi-fi system is designed for the playback of audio signals. Any other use is

expressly prohibited.

If you want to set up the hi-fi system on wall shelves or in cupboards, please

ensure that the device is adequately ventilated. There must be at least 10 cm of

space at the side, above and behind the device.

Please note when setting up the hi-fi system that furniture surfaces are coated

with various types of paint and plastic, which often contain chemical additives.

These additives may cause corrosion to the feet of the unit. This may leave stains

on the surface of the furniture which can be difficult or impossible to remove.

If the hi-fi system is exposed to sudden changes in temperature, for example

when taken from the cold into a warm room, wait at least two hours before

using it.

The hi-fi system is designed for use in dry rooms. If you do use it outside, please

ensure that it is protected from moisture, such as rain or water splashes.

Do not place the hi-fi system close to heating units or in direct sunlight, as this

will impair cooling.

Do not place any vessels containing liquids, such as vases, on the hi-fi system.

Do not place any objects such as burning candles on the hi-fi system. Do not

insert any foreign objects in the CD or tape compartment.

Do not open the hi-fi system casing under any circumstances. The manufacturer

will not accept any liability for damage resulting from improper handling.

Thunderstorms are a danger to all electrical devices. Even if the hi-fi system is

switched off, it can be damaged by a lightning strike to the mains or the

antenna cable. Always disconnect the mains and antenna plugs during a storm.

°C2h

°C

TAPE COLOUR

BAND/TUNER

EREO MICRO HIFI SYSTEM

VOLUME

CLOCK/SET

TIMER ON/OFF

Vi

MULTICOLOUR LC-DISPLAY

ǵ

PROGRAMREPEAT EQ/X-BASS STOP PLAY/PAUSE

OPEN/CLOSE

SKIP/SEARCH/TUNING/ALBUM

V

arixx

CD/CD-R/CD-RW COMPATIBLE

CD/RANDOM TAPE COLOUR

BAND/TUNER

STEREO MICRO HIFI SYSTEM

RDS

DISPLAY/DEMO

ǼVOLUME

CLOCK/SET

TIMER ON/OFF

Varixx

ǵ

MULTICOLOUR LC-DISPLAY

ǵ

PHONES PRESETP+P- PROGRAMREPEAT EQ/X-BASS STOP PLAY/PAUSE

OPEN/CLOSE

SKIP/SEARCH/TUNING/ALBUM

V

arixx

CD/CD-R/CD-RW COMPATIBLE

CD/RANDOM TAPE COLOUR

BAND/TUNER

STEREO MICRO HIFI SYSTEM

RDS

DISPLAY/DEMO

ǼVOLUME

CLOCK/SET

TIMER ON/OFF

Varixx

ǵ

MULTICOLOUR LC-DISPLAY

ǵ

PHONES PRESETP+P- PROGRAMREPEAT EQ/X-BASS STOP PLAY/PAUSE

OPEN/CLOSE

SKIP/SEARCH/TUNING/ALBUM

V

arixx

CD/CD-R/CD-RW COMPATIBLE

ǵ

PHONES PRESETP+P- PROGRAMREPEAT EQ/X-BASSSTOP PLAY/PAUSE

OPEN/CLOSE

SKIP/SEARCH/TUNING/ALBUM

V

arixx

CD/CD-R/CD-RW COMPATIBLE

L

SPEAKERS

IMPEDANCE

4Ω

FM ANT

75Ω

AM ANT

! SERVICE !! SERVICE !! SERVICE !

CD/RANDOM TAPE COLOUR

BAND/TUNER

STEREO MICRO HIFI SYSTEM

RDS

DISPLAY/DEMO

ǼVOLUME

CLOCK/SET

TIMER ON/OFF

MULTICOLOUR LC-DISPLAY

ǵ

PHONES PRESETP+P- PROGRAMREPEAT EQ/X-BASS STOP PLAY/PAUSE

OPEN/CLOSE

SKIP/SEARCH/TUNING/ALBUM

V

arixx

CD/CD-R/CD-RW COMPATIBLE

ǵ

OPEN/CLOSE

V

arixx

CD/CD-R/CD-RW COMPATIBLE

L

SPEAKERS

IMPEDANCE

4Ω

FM ANT

75Ω

AM ANT

10

cm

10

cm

10

cm

10

cm

CD/RANDOM TAPE COLOUR

BAND/TUNER

STEREO MICRO HIFI SYSTEM

RDS

DISPLAY/DEMO

ǼVOLUME

CLOCK/SET

TIMER ON/OFF

Varixx

ǵ

MULTICOLOUR LC-DISPLAY

02 UMS 4401 SPCD, GB 07.07.2004 14:35 Uhr Seite 4

ENGLISH

5

OVERVIEW________________________________________________________________________

The hi-fi system controls

Controls on the top

PHONES Headphone jack for connecting a stereo

headphone set with a jack plug

(ø 3.5 mm).

The loudspeakers of the hi-fi system

are automatically switched off.

PRESET In tuner mode:

P – P + For selecting stored radio stations

For selecting the preset position when

storing radio stations

PROGRAM For activating and storing the clock and

timer settings

In tuner mode:

For storing radio stations

In CD mode:

For storing a track memory from the CD

(in stop position)

REPEAT In MP3 and CD mode:

Press once: the current file or the current

track is played back repeatedly

Press twice: the current album is played

back repeatedly (MP3 only)

Press three times: all files or tracks are

played back repeatedly

EQ/X-BASS Press repeatedly: selects the sound settings

Hold down: switches the Ultra Bass System

on and off

ǵ

PHONES PRESET P+P- PROGRAM REPEAT EQ/X-BASS STOP PLAY/PAUSE

OPEN/CLOSE

SKIP/SEARCH/TUNING/ALBUM

Varixx

CD/CD-R/CD-RW COMPATIBLE

02 UMS 4401 SPCD, GB 07.07.2004 14:35 Uhr Seite 5

6

OVERVIEW _____________________________________________________________

STOP 7In MP3 and CD mode:

Ends playback

Press twice: deletes a track memory

S/89/AFor setting the time

SKIP/SEARCH/ For setting the timer data

TUNING/ALB In tuner mode:

Hold down: starts the station search

Press briefly: changes the frequency in

increments or starts the PTY search

In MP3 and CD mode:

Press briefly: selects the previous/next

file or track

Press and hold down: searches for a

particular passage

In MP3 mode:

Press and hold down: selects albums

PLAY/PAUSE In MP3 and CD mode:

ıII Starts playback

Pauses playback

OPEN/CLOSE Opens and closes the

CD compartment

ǵ

PHONES PRESET P+P- PROGRAM REPEAT EQ/X-BASS STOP PLAY/PAUSE

OPEN/CLOSE

SKIP/SEARCH/TUNING/ALBUM

Varixx

CD/CD-R/CD-RW COMPATIBLE

02 UMS 4401 SPCD, GB 07.07.2004 14:35 Uhr Seite 6

ENGLISH

7

OVERVIEW _____________________________________________________________

Controls on the front

•LED (standby)

ǼSTANDBY Switches the hi-fi system to and from

standby mode

OInfrared receiver for remote control

signals

RDS In tuner mode:

for activating RDS functions such as the

PTY search and standby mode for radio

traffic news

DISPLAY/DEMO In tuner mode:

Displays RDS information such as radio

text, station type, RDS time, etc.

In CD-DA mode:

Displays the remaining playing time of

the current track, the elapsed playing

time and remaining playing time of the

CD

In MP3 mode:

Displays in succession the file name,

artist, album name, etc.

CD Selects the CD input source

TAPE Selects the tape input source

TUNER/BAND Selects the tuner input source

Selects the frequency band- »FM« or

»MW«

COLOUR Selects the colour of the display

illumination

CD/ RANDOM TAPE COLOUR

BAND/TUNER

STEREO MICRO HIFI SYSTEM

RDS

DISPLAY/DEMO

ǼVOLUME

CLOCK/SET

TIMER ON/OFF

Varixx

ǵ

MULTICOLOUR LC-DISPLAY

02 UMS 4401 SPCD, GB 07.07.2004 14:35 Uhr Seite 7

8

OVERVIEW _____________________________________________________________

TIMER ON/OFF Switches the switch-on timer on and off

CLOCK/SLEEP For displaying the time in CD-, Tuner- or

Tape mode

For setting the sleep timer

ļVOLUME ĻAdjust the volume

Tape

compartment Open with STOP 7/ə

Buttons under the cover panel:

RECORD•Starts recording

PLAY4Starts playback

3REWIND Rewinds the tape to the beginning

F.FWD 4Fast forwards the tape to the end

STOP 7/əEnds the drive functions

Opens the tape compartment

PAUSE II Pauses playback

02 UMS 4401 SPCD, GB 07.07.2004 14:35 Uhr Seite 8

OVERVIEW _____________________________________________________________

ENGLISH

9

The hi-fi system displays

In CD mode: the inserted CD contains

MP3 data

A tape recording is displayed

In tuner mode:

Flashes when storing a radio station.

In MP3 and CD-DA mode: flashes when

creating a track memory; displays the

playback of a track memory.

The switch-on timer is activated

In MP3 mode: the MP3 file search function is activated

PRESET In tuner mode: preset position display for radio stations

SLEEP The sleep timer is activated

RANDOM In MP3 or CD-DA mode: the files or tracks are played back in

random order

REPEAT In MP3 and CD-DA mode: the current file or track is repeated

REPEAT ALB. In MP3 mode: all the files in a directory are repeated

REPEAT ALL In MP3 and CD-DA mode: all files or a whole CD are repeated

REMAIN In CD mode: the remaining playing time is displayed

ALP. SEARCH

TIMER

PROGRAM

REC.

MP3

0000:0000

FM

MW

MHz

kHz

RANDOMSLEEPPRESET REPEAT ALB. ALL REMAIN

f

ALP. SEARCHTIMERPROGRAMREC.MP3

X-BASSPOPJAZZROCKCLASSIC ʀL R ǁ

TA PTY

02 UMS 4401 SPCD, GB 07.07.2004 14:35 Uhr Seite 9

10

OVERVIEW _____________________________________________________________

00 0000:00 In standby mode: displays the time and

special functions.

In tuner mode:

Displays the frequency and RDS informa-

tion.

In MP3 mode: displays the total number

of albums and files, the current album,

the current file and the elapsed playing

time of the current file.

In CD-DA mode:

Displays the total number of tracks, the

total playing time, the current track and

the elapsed playing time.

FM MW In tuner mode: FM and MW frequency band displays

MHz In tuner mode: frequency display (FM)

MW In tuner mode: frequency display (MW)

fIn tuner mode: an RDS station is being received

TA In tuner mode: standby mode for radio traffic news is activated

PTY In tuner mode: the search function for PTY station types is activated

ʀL R ǁIn tuner mode: an FM stereo station is being received

The CLASSIC, ROCK, JAZZ or

POP sound settings are selected

The Ultra Bass System is activated

X-BASS

POPJAZZ

ROCKCLASSIC

0000:0000

FM

MW

MHz

kHz

RANDOMSLEEPPRESET REPEAT ALB. ALL REMAIN

f

ALP. SEARCHTIMERPROGRAMREC.MP3

X-BASSPOPJAZZROCKCLASSIC ʀL R ǁ

TA PTY

02 UMS 4401 SPCD, GB 07.07.2004 14:35 Uhr Seite 10

ENGLISH

11

OVERVIEW _____________________________________________________________

The back of the hi-fi system

yWire antenna for FM (VHF) reception.

The hi-fi system has a built-in antenna for

MW reception.

SPEAKERS

Loudspeaker connections for the

L +/– R +/–

loudspeakers supplied.

L

= left channel, R= right channel.

ÜMains cable.

The only way to isolate the hi-fi system

from the mains supply is to pull the plug

out.

General information on laser devices

The laser installed in the device conforms to LASER CLASS 1 and is designed to

ensure that the maximum permissible emission value cannot be exceeded under

any circumstances.

Caution:

If operating devices or methods other than those specified here are

employed, it may lead to dangerous exposure to emissions. Invisible laser

radiation is emitted if the CD compartment is opened or the safety locking

mechanism is shorted. Do not expose yourself to this radiation.

L

SPEAKERS

IMPEDANCE

4Ω

FM ANT

75Ω

AM ANT

02 UMS 4401 SPCD, GB 07.07.2004 14:35 Uhr Seite 11

12

OVERVIEW _____________________________________________________________

The remote control

ǼSTANDBY Switches the hi-fi system to and from standby mode; switches

on from demo mode

MUTE Switches the hi-fi system to and from mute mode

VOL. AAdjust the volume

VOL. S

CD/RANDOM Selects the CD input source

In MP3 and CD-DA mode: plays back files or tracks in

random order

BAND/TUNER Selects the tuner input source; selects the frequency band

»FM« or »MW«

P– P+ In tuner mode:

Select stored radio stations

Select the preset position when storing the radio station

EQ/X-BASS Press several times: selects the sound settings

Hold down: switches the Ultra Bass System on and off

S/89/AFor setting the time

SKIP/SEARCH/ For setting the timer data

TUNING/ALB In tuner mode:

Hold down: starts the station search

Press briefly: changes the frequency in increments or starts

the PTY search

In MP3 and CD mode:

Press briefly: selects the previous/ next file or track

Press and hold down: searches for a particular passage

In MP3 mode:

Press and hold down: selects albums

PQRS TUV WXYZ

JKL

ABC DEF

Ǽ

BAND/

TUNER

CD/

RANDOM

GHI MNO

123

456

789

0

PROGRAM +10

FILE

SEARCH

CLOCK/SLEEP TIMER

P+

DISPLAY

SEARCH/SKIP/TUNING/ALBUM

P

-

STERO/

BEAT CUT EQ/X-BASS

MUTE

VOLUME

02 UMS 4401 SPCD, GB 07.07.2004 14:35 Uhr Seite 12

OVERVIEW _____________________________________________________________

ENGLISH

13

DISPLAY/DEMO In tuner mode:

Displays RDS information such as radio text, station type,

RDS time, etc.

In CD-DA mode:

Displays the remaining playing time of the current track, the

elapsed playing time and remaining playing time of the CD

In MP3 mode:

Displays in succession the file name, artist, album name, etc.

1 2 ABC ... Alphanumeric buttons for entering preset station

9 WXYZ 0 numbers (in tuner mode) or file or track numbers (in MP3

and CD-DA mode)

In MP3 mode: for entering file names

+ 10 Enables entry of two-digit numbers

PROGRAM For activating and storing the clock and timer settings

In tuner mode:

For storing radio stations

In MP3 and CD-DA mode:

For storing a track memory (in stop position)

CLOCK/SLEEP Activates the clock setting

In tuner and CD mode: displays the time

For setting the sleep timer

STEREO/BEAT In tuner mode: switches between mono and stereo reception

CUT In tape mode:

Suppresses audio interference when recording from an

MW radio station

PQRS TUV WXYZ

JKL

ABC DEF

Ǽ

BAND/

TUNER

CD/

RANDOM

GHI MNO

123

456

789

0

PROGRAM +10

FILE

SEARCH

CLOCK/SLEEP TIMER

P+

DISPLAY

SEARCH/SKIP/TUNING/ALBUM

P

-

STERO/

BEAT CUT EQ/X-BASS

MUTE

VOLUME

02 UMS 4401 SPCD, GB 07.07.2004 14:35 Uhr Seite 13

14

OVERVIEW _____________________________________________________________

FILES SEARCH In MP3 mode: activates the file search according to name

TIMER For switching the timer on and off

ıII In MP3 and CD-DA mode:

Starts playback

Pauses playback

7In MP3 and CD-DA mode:

Ends playback

Deletes a track memory

PQRS TUV WXYZ

JKL

ABC DEF

Ǽ

BAND/

TUNER

CD/

RANDOM

GHI MNO

123

456

789

0

PROGRAM +10

FILE

SEARCH

CLOCK/SLEEP TIMER

P+

DISPLAY

SEARCH/SKIP/TUNING/ALBUM

P

-

STERO/

BEAT CUT EQ/X-BASS

MUTE

VOLUME

02 UMS 4401 SPCD, GB 07.07.2004 14:35 Uhr Seite 14

ENGLISH

15

ǵ

V

arixx

CD/CD-R/CD-RW COMPATIBLE

L

SPEAKERS

IMPEDANCE

4Ω

FM ANT

75Ω

AM ANT

TVR

AM

LOOP ANTENNA

Ǽ

PHONES PRESET P+P- PROGRAM REPEAT

Connecting the antennas

1Plug the rooftop antenna cable into the »FM ANT 75 Ω« antenna socket on

the hi-fi system.

Note:

If no rooftop antenna is available, use the auxiliary antenna supplied. This

antenna provides reasonably good reception of local FM (VHF) stations.

Do not shorten the auxiliary antenna.

2Plug the cable of the wire frame antenna supplied into the »AM ANT«

socket on the hi-fi system. Adjust the position of the wire frame antenna until

you get the best reception.

Connecting the loudspeakers

1Connect the loudspeaker cables to the »SPEAKER L +/– R +/–« terminals

on the hi-fi system.

Connect the cables marked in red to the red terminal.

Connecting the headphones

1Insert the jack plug (ø 3.5 mm) of the headphones into the »PHONES«

socket on the top of the device.

– The loudspeakers of the hi-fi system are switched off.

CONNECTION AND PREPARATION_______

02 UMS 4401 SPCD, GB 07.07.2004 14:35 Uhr Seite 15

16

Connecting the mains cable

Note:

Check that the mains voltage on the type plate (on the back of the device)

corresponds to your local mains supply.

The only way to disconnect the hi-fi system from the mains supply is to pull

the plug out.

1Plug the mains cable into the wall socket.

Note:

The demo program is automatically started each time the hi-fi system is

connected to the mains, or after a power failure.

To end the demo program, press »ǼSTANDBY« on the hi-fi system or

remote control or press »DEMO« on the remote control.

Inserting batteries in the remote control

1Open the battery compartment by pushing the cover up.

2When inserting the batteries (Mignon type, e.g. 2 x 1.5 V, AAA, LR 3,

AM 3), observe the polarity marked on the base of the battery compartment.

Note:

If the device no longer reacts properly to remote control commands, the bat-

teries may be flat. Be sure to remove used batteries. The manufacturer

accepts no liability for damage resulting from leaking batteries.

Environmental note:

Batteries, including those which contain no heavy metal, may not be

disposed of with household waste. Please dispose of used batteries in an

environmentally sound manner. Find out about the legal regulations which

apply in your area.

CONNECTION AND PREPARATION _____________________________

L

SPEAKERS

IMPEDANCE

4Ω

02 UMS 4401 SPCD, GB 07.07.2004 14:35 Uhr Seite 16

ENGLISH

17

CONNECTION AND PREPARATION _____________________________

Additional information for units sold in the UK.

Units sold in the UK are suitable for operation from a 240V ac, 50Hz mains supply.

The range of multi-system receivers is built to work in most European countries. However, the mains plug and

socket system for the UK differs from many European countries.

This appliance has been supplied with a fitted, non-removable, approved converter plug for use in the UK. This

converter plug is fitted with a 5A rated fuse.

In case this appliance is supplied with a moulded 2-pin Euro plug only, which is unsuitable for UK operation, this

must be cut off and immediately disposed of. An approved 13A, 3-pin UK plug should then be fitted by a

qualified electrician.

Note:

The severed Euro plug must be destroyed to avoid a possible shock hazard should it be inserted into a socket

elsewhere.

If a non-rewireable 3-pin plug or a rewireable 13A (BS1363) 3-pin plug is used, it must be fitted with a 5A ASTA

or BSI approved BS1362 fuse. If any other type of plug is used it must be protected by a 5A fuse either in the

plug, or at the distribution board. If this type of plug becomes defective, ensure that the fuse is removed before

disposal, to eliminate potential shock hazard.

If it is necessary to change the fuse in the non-rewireable plug, the correct type and rating (5A ASTA or BSI

approved BS1362) must be used and the fuse cover must be refitted. If the fuse cover is lost or damaged, the lead

and plug must not be used until a replacement is obtained. Replacement fuse covers should be obtained from

your dealer.

Important:

The wires in the mains lead are colour coded in accordance with the following code:

BLUE – NEUTRAL

BROWN – LIVE

As the colours of the wires in the mains lead of your appliance may not correspond with the coloured marking

identifying terminals in your plug, proceed as follows:

Connect the BLUE coloured wire to plug terminal marked with the letter “N” or coloured black.

Connect the BROWN coloured wire to the plug terminal marked with the letter “L” or coloured red.

In no circumstance must any of the wires be connected to the terminal marked with the letter “E”, earth symbol

“z”, coloured green, or green & yellow.

Replacement mains lead sets can be obtained from your local dealer, or by contacting Grundig Consumer

Relations (01788 570088)

Moulded 3-pin lead set, suitable for UK use:

Ref: Leadset UK 8290-991-224

Moulded 2-pin Euro lead set, not suitable for UK use:

Ref: Leadset Euro 8290-991-316

02 UMS 4401 SPCD, GB 07.07.2004 14:35 Uhr Seite 17

18

SETTINGS____________________________________________________________________________

Setting the time

If the clock has not been set, the time display flashes when the hi-fi system is

connected to the mains. The following settings may only be performed in

standby mode.

1To set the time, press » PROGRAM«.

– Display: the hours display flashes.

2Set the hours with »5a« or »s6 «.

3Press » PROGRAM« to confirm.

– Display: the minutes flash.

4Set the minutes with »5a« or »s6 «.

5Press » PROGRAM« to confirm.

– Display: the 24 hour clock format flashes.

6To set the 24 hour clock format, press » PROGRAM«.

– Display: the current time, e.g. »14:35«

or

Set the 12 hour clock format with »5a« or »s6 « and press » PRO-

GRAM« to confirm.

– Display: »PM« and the current time, e.g. »PM 2:35« (»AM« for the

morning, »PM« for the afternoon/evening).

Note:

You must reset the time after a power failure or when the mains plug has

been pulled out.

I3:25

14:25

24H 14:35

PM 2:35

02 UMS 4401 SPCD, GB 07.07.2004 14:35 Uhr Seite 18

ENGLISH

19

SETTINGS _______________________________________________________________

Switching RDS time synchronisation on and off

If the RDS time information is received via an RDS station, the time is set

automatically. When RDS stations are received, the time is later continuously

updated, provided that an appropriate time signal is transmitted and the

function is switched on.

1Press »TUNER/BAND« to switch the hi-fi system on.

2To call up the RDS time synchronisation, keep pressing »RDS« on the device

until »SYNC OFF« or »SYNC ON« appears in the display.

3Press » PROGRAM« to switch the RDS time synchronisation on or off.

– Display: briefly »SYNC ON«, or »SYNC OFF«.

Setting and storing radio stations

Up to 20 radio stations in the FM band and up to 10 stations in the MW band

can be stored.

1Press »TUNER/BAND« to switch the hi-fi system on.

– Display: frequency band and frequency or station name.

2Select the frequency band (FM or MW) by pressing »TUNER/BAND«.

– Display: »FM« or »MW«.

3To activate the station search, keep pressing »5a« or »s6 « until

»SEARCHING« appears as ticker text in the display.

– The search stops when a radio station is found.

Note:

To change the frequency in increments, repeatedly press »5a« or »s6 «

briefly.

– Display: the frequency in 50 kHz increments (FM), or in 9 kHz increments

(MW).

SYNC ON f

TA

ʀL R ǁ

100.60

ʀL R ǁ

FM

MHz

SEARCHI

02 UMS 4401 SPCD, GB 07.07.2004 14:35 Uhr Seite 19

20

SETTINGS _______________________________________________________________

4To activate the memory function, press »PROGRAM«.

– Display: »2« and » « flash for about 5 seconds.

Note:

If no button is pressed within 5 seconds, the device automatically quits the

memory function.

5Press »P – « or »P +« to select the desired preset position.

6To store the radio station, press »PROGRAM« again.

– Display: »PRESET« and, for example, »5«.

7To search for and store more radio stations, repeat steps 2to 6.

PROGRAM

187.60

PROGRAM

ʀL R ǁ

FM

MHz

5 87.60

PRESET

ʀL R ǁ

FM

MHz

02 UMS 4401 SPCD, GB 07.07.2004 14:35 Uhr Seite 20

Page is loading ...

Grundig Varixx UMS 4401 SPCD User manual

Grundig Varixx UMS 4401 SPCD User manual

Related papers

Other documents