1. Before connecting, please make sure your smart phone or device is connecting with
your Wi-Fi successfully, and open the bluetooth in the same time.
2. Turn ON-OFF the smart light for 3 times until it blinks repidly. (If the smart light
blinks repidly when turn on the power, it means it's ready for configuration already.)
3. Open the App and click "+" to add device.
4, The device will be showed on the page automatically, click "Go to add"
Maxxima LED 4 Sq Slim P ... Maxxima LED 4 Sq Slim P ...
When the smart lights' internet connect was cut down, they can't be
controlled by app at the moment.But after 3~5mins, the smart lights
will automatically switch to the Bluetooth control mode.
Note: 1. Make sure your phone has turned on the Bluetooth switch.
2. The product has been paired in your mobile phone and has
not been deleted from the app.
3. Keep your mobile phone connected to the internet
BlueTooth capability Instructions
At this time, you will still be able to control the product in a short
distance through your mobile phone's Bluetooth.
Download the “Smart Life” App
Scan the QR code below to download the ' Smart Life App.
You can also download this app in the App Store/Android
Playstore, search "Smart Life”
• Open the Smart Life App, click Register to create an account
& login.
• If already registered, login.
• Click 'Add Device' or the ' + ' in the top right-hand corner;
• The light should automatically appear to add. If not, you can follow the
the next steps.
• Click 'Lighting' then 'Light Source (Wi-Fi)' to enter the
device connection interface.
NEXT
• You may also share all devices in your account with another
account
• Go to “Me” at the bottom of the App
• Select “Home Management”
• Select the Home you wish to share with
• Select “Add Member”. You can send the invite via your Smart Life
account, Message, or Email. New Members must have or create a
Smart Life account via the Smart Life App
For Amazon Alexa
• Open the Alexa app and select “Skills” from the top menu
• On the Skills page, search for Smart Life
• Enable Smart Life in the Alexa App
• Log in with your Smart Life Account (username & password)
• Discover new smart devices in the App or ask Alexa to discover new
devices
For Google Home
• Open the Google Home App and tap the “+” icon in the homepage
• Select “Set up device” in the “Add and manage” Screen
• In the “Set Up” screen, tap “New Devices” to set up new devices in your
home
• Tap “Works with Google” to authorize Google Home to work with your
Smart Life account
the On position. If not, turn on.
• Please check whether the light is connected with power, and your
mobile device is connected to a 2.4GHz WiFi Network.
• Check the router. If the router is dual-band, make sure to select
2.4GHz network to add the light. Router Broadcast should be set
to open. Also try disabling the 5GHz band temporarily on the
router.
• Make sure the WiFi User Name and Password are correct.
• Make sure the light is within the range of the router signal. If not,
device to make sure the signal is strong in that area or if it is weak.
• Check to see if the maximum number of devices/lights the router
can handle has been reached. If so, remove a device/light and
restart the router. If there is no Wi-Fi connection, try restarting the
light and/or restarting the router.
sequence 4 or 5 times instead of 3 times. Also give a second or 2
• If the internet signal/connection from the internet provider is
down, the light can still be controlled through the mobile device
as long as both are connected to the same Network (Intranet).
• If the internet signal/connection is down from your router, this
light has a backup bluetooth function that will allow you to
control the lights from a certain distance. Ensure bluetooth is
enabled on your device.
• For additonal troubleshooting tips, visit the webpage listed below
• Enter the Network Name & WiFi password for your home and click Next.
light’s WiFi hotspot: “Smartlife-XXXX”
• Return to the Smart Life App and wait for the connection to complete
-
1
Luvoni MRL-S41030DWS Installation guide
- Type
- Installation guide
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI